• 20 hp (14.6 kW) Kohler® engine
  • 2-Pump System
  • 2 Ground Speeds
  • Compact Size

The Toro Dingo 220 provides excptional value. Packed with 207 bar and 56 L/min of hydraulic power, the Dingo 220 is built with a 20 hp (14.9 kW) Kohler engine to save you time and money in the long run, and excellent power for enhanced performance.

Compact Size & Maneuverability

Get the Dingo into tight spaces where only hand labour could go before. Add to the easy spin steer turning, and you’ll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labour.

Fingertip Controls

Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips.

Hydraulic Power

Up to 34 L/min at 207 bar hydraulic system gives you incredible hydraulic power to auger up to 76 cm holes or trench 91 cm deep.

2-Pump Hydraulic System

Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 9 gpm (41 L/min) and a low flow of 3.3 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power!

Quick Attach System™

Each attachment is equipped with Toro’s unique Quick Attach System™. The Dingo QAS makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception - the backhoe takes 2 minutes.)

2 Ground Speeds

Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve.

  • Air Filter
    Std Dry Type Air Cleaner
  • Controls
    Key, throttle, choke
  • Cooling System
    Air Cooled
  • Engine
    20 HP (14.6 kW) Kohler® Command PRO®
  • Ground Clearance
    15 cm front & rear
  • Height
    123.7 cm, 231.6 cm std. bucket @ highest
  • High Flow Pump
    40.9 L/min
  • Hinge Pin Height
    167.6 cm
  • Hydraulic Reservoir Cap.
    56 litres
  • Hydraulic System Pressure
    207 bar (3,000 psi)
  • Length
    158 cm, 210.3 cm with bucket
  • Loader Hydraulic System
    2 control levers- push / pull
  • Low Flow Pump
    15.1 L/min
  • Steering Controls
    Zero turning type with 2 levers
  • Tip Capacity
    467.2 kg with 90.7 kg operator
  • Width
    40.5" (102.9 cm) std tyres, 35" (88.9 cm) narrow
  • Disclaimer
    *See your local dealer for warranty details.
  • Warranty Product - One Year* / Engine - Two Year*

    For complete product warranty information contact Toro Customer Service