Serie 5000, 60" (152 cm), 25.5 cv (19.0 kW), 852 cc
Información sobre productos
- Nº Modelo: 72910
- Nº Serie: 415300000 - 416303728
- Tipo de producto: Riding Products
Cargando...
Dibujos de ensamblaje
Buscar una piezas en los dibujos de ensamblaje:
-
Manual de mantenimiento
-
Manual del operador
-
Catálogo de piezas
-
Garantía del Producto
-
Instrucciones de montaje
GrandStand Turbo Baffle Kit (Pieza Nº 107-1634)
This genuine Toro OEM turbo baffle kit is designed for Toro GrandStand stand-on mowers and modifies the airflow under the cutting deck to improve clipping discharge performance in heavy, dense, or wet grass conditions. The turbo baffle redirects air movement beneath the deck to increase the velocity at which clippings are expelled through the discharge chute, reducing the tendency for clippings to clump or block in challenging mowing conditions. Verify your model and serial number before ordering.
Z-Master Anti-Scalp Kit (Trim Side) (Pieza Nº 108-4140)
Toro OEM anti-scalp deck wheels. These wheels help prevent the deck from coming in contact with the ground when passing over a high spot, thus preventing the blade from slicing off or "scalping" large clumps of grass.
Hitch Kit (Pieza Nº 109-9487)
Hypr-Oil™ 500 (quart) (Pieza Nº 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon) (Pieza Nº 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
HYPR-OIL 500-5 GALLON (Pieza Nº 114-4715)
BIMINI FOLDING SHADE ASM (Pieza Nº 115-4510)
Roller Striping Kit (Pieza Nº 115-7470)
Toro OEM A mower striping kit. The ultimate way to enhance the striping ability of your Z-Master. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.
KIT,FRPS LIGHT (Pieza Nº 116-1154)
Seat Cover w/Arm Rest (Pieza Nº 117-0095)
This genuine Toro OEM seat cover with arm rest is designed to fit Toro Z-Master zero turn mowers and serves a dual purpose: protecting the operator seat from UV and wear from day one, or replacing a worn or damaged seat cover as a wear-and-tear item. The arm rest addition improves operator comfort significantly during longer mowing sessions. Verify your model and serial number before ordering.
Operator-Controlled Discharge Chute Kit (Pieza Nº 117-3600)
This genuine Toro OEM operator-controlled discharge chute kit allows the operator to open and close the mower's discharge chute directly from the controls while mowing — without stopping, dismounting, or manually adjusting the chute. This significantly reduces the time and effort required to redirect clippings when mowing near driveways, flowerbeds, and pedestrian areas. A popular purchase-stage upgrade for operators who do precise or complex mowing. Verify your model and serial number before ordering.
Z Stand Kit for Z Master Riding Mower with 48", 52" or 60" Deck (Pieza Nº 121-4811)
This genuine Toro OEM Z Stand deck stand kit is designed for Toro Z-Master zero turn mowers with 48", 52", or 60" decks. It allows operators and technicians to quickly and safely access the underside of the mower deck for blade changes, belt replacement, and routine maintenance — without needing a full mower jack or lift. Widely used in professional service environments and by commercial operators who need fast, reliable under-deck access in the field. Verify your model and serial number before ordering.
Suspension Seat and Mount Kit (Pieza Nº 121-7596)
Toro suspension seat increases operator comfort and boosts productivity in ways you’ve never imagined. Mow longer without stopping and cut around even the most intricate landscaping at faster speeds with better results. This Toro OEM replacement seat is designed to restore operator comfort on your Toro riding mower. Verify your model and serial number to confirm compatibility before ordering.
KIT-ROPS LOCK TORO (Pieza Nº 126-4064)
Jack Kit With Adapter, Zero-Turn-Radius Side-Discharge or Rear-Dischar (Pieza Nº 126-7282)
Jack Kit Adapter, Zero-Turn-Radius Side-Discharge or Rear-Discharge Ri (Pieza Nº 126-7283)
Riding Mower Jack Mount Kit (Pieza Nº 127-6665)
Esta pieza de repuesto OEM original de Toro® está fabricada según las especificaciones de ingeniería exactas de su equipo Toro para garantizar un calce adecuado y un desempeño confiable. Verifique su modelo y número de serie para confirmar la compatibilidad antes de realizar un pedido.
Riding Mower Jack Kit (Pieza Nº 127-6666)
Este kit de gato para cortacéspedes de asiento OEM original de Toro® está diseñado para levantar y sostener en forma segura su cortacésped de asiento o de giro cero de Toro y brindarle así un acceso seguro y estable debajo de la carcasa para recambios de cuchillas, reemplazos de correa y mantenimiento de rutina. Es uno de los accesorios más prácticos en el momento de la compra para cualquier nuevo propietario de un cortacésped: invertir en un gato adecuado desde el primer día permite evitar el uso de métodos de elevación improvisados que podrían causar lesiones y daños en el equipo. Verifique su modelo y número de serie antes de realizar un pedido.
Power Deck Lift Kit (Pieza Nº 132-5986)
Easily Raise and Lower your Z-Master cutting deck with the push of a button using this Toro power lift kit. Toro operator controlled discharge kit. This Toro OEM discharge chute kit allows the operator to direct or block the flow of clippings from the mower deck, helping to prevent debris from reaching flower beds, driveways, or bystanders. Verify your model and serial number to confirm compatibility before ordering.
Worklight Kit (Pieza Nº 135-7320)
Titan HD Series Bucket Mount Kit (Pieza Nº 137-9216)
Kit de montaje de canasto OEM de Toro®. Ahorre tiempo, diseño y molestias mientras se encuentra en su posición de trabajo para el día. Verifique su modelo y número de serie para confirmar la compatibilidad antes de realizar un pedido.
Trimmer Mount Kit (Pieza Nº 137-9769)
Toro OEM trimmer mount kit. Keep your trimmer securely mounted on your riding mower. Verify your model and serial number to confirm compatibility before ordering.
60 Inch Recycler Kit (Pieza Nº 139-6655)
Cuando se instala en cortacéspedes de asiento de giro cero de Toro® con carcasa de 42" (106.6 cm) compatibles, el kit Recycler le permite triturar la hierba para convertirla en mantillo cortándola varias veces y obteniendo recortes diminutos. Verifique su modelo y número de serie para confirmar la compatibilidad antes de realizar un pedido.
Neumáticos de césped radiales sin aire MICHELIN® X® TWEEL® de 24" (61 cm) (Pieza Nº 139-7891)
The MICHELIN® X® TWEEL® Turf Airless Radial Tires are the next “revolution” in commercial mowing has arrived. The MICHELIN X TWEEL Turf Airless Radial Tire has all the qualities you would want in a pneumatic tire but it never needs air. The MICHELIN X TWEEL Turf airless radial tire is a single-unit assembly that replaces a conventional tire and wheel, eliminating the need for air pressure entirely — which means no flats, no downtime, and no patch kits. The wear life of a TWEEL tire is significantly longer than a comparable pneumatic tire, reducing the frequency of replacement and total cost of ownership over time. Verify your model and serial number to confirm the correct size before ordering.
20.5 Inch Hi-Flow Blade (Pieza Nº 140-1240)
This Toro OEM 20.5-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Cuchilla Atomic de 20.5" (52.07 cm) (Pieza Nº 140-1241)
Cuchilla Atomic Toro OEM de 20.5" (52 cm). Cuchillas Atomic. La cuchilla Atomic se conoce como “Estilo Gator" o “Cuchilla Gator". Proporciona la mejor calidad de corte para el mulching. Esta cuchilla Toro tiene múltiples aplicaciones. Asegúrese de verificar la marca y el número de serie para asegurarse de que la pieza es la correcta.
20.50 Inch Medium Flow Blade (Pieza Nº 140-4853)
This Toro OEM 20.5-inch Mid Flow replacement mower blade is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
20.50 Inch Low Flow Blade (Pieza Nº 140-4854)
This Toro OEM 20.5-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
20.5 Inch Recycler Blade (Pieza Nº 140-4855)
This Toro OEM 20.5-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Hi-Flow20.5 Inch Blade Pack (6) (Pieza Nº 140-4877)
This Toro OEM 20.5-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Mid Flow 20.5 Inch Blade Pack (6) (Pieza Nº 140-4878)
This Toro OEM 20.5-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Low Flow 20.5 Inch Blade Pack (6) (Pieza Nº 140-4879)
This Toro OEM 20.5-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Atomic 20.5 Inch Blade Pack (6) (Pieza Nº 140-4880)
This Toro OEM 20.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Recycler 20.5 Inch Blade Pack (6) (Pieza Nº 140-4881)
This Toro OEM 20.5-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Riding Mower Toe board Weights (Pieza Nº 140-4958)
Toro genuine riding mower weight kit. Provides added stability on uneven terrain or when using rear mounted bagging attachments. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.
BLADE-20.50 HIGH FLOW (Pieza Nº 147-6252)
6 PACK-BLADE, 20.50 HIGH FLOW (Pieza Nº 147-6256)
TORO RIDER OVER SEAT BAG (Pieza Nº 490-7317)
Titan Deluxe Cover (Pieza Nº 490-7319)
Por lo que respecta a la fiabilidad, Toro suministra piezas de repuesto diseñadas con las mismas especificaciones de ingeniería que nuestros equipos. Para su tranquilidad, exija piezas genuinas Toro.
Bolsa de reposabrazos del conductor (Pieza Nº 490-7320)
Esta pieza de repuesto OEM original de Toro® está fabricada según las especificaciones de ingeniería exactas de su equipo Toro para garantizar un calce adecuado y un desempeño confiable. Verifique su modelo y número de serie para confirmar la compatibilidad antes de realizar un pedido.
Spark Arrestor Screen (Pieza Nº 75-6880)
Blower and Drive Kit, 60in E-Z Vac for Z Master G3 Mower (Pieza Nº 78553)
60in E-Z Vac Triple Bagging System, Z Master G3 Mower (Pieza Nº 78563)
60in E-Z Vac DFS Collection System, Z Master G3 Mower (Pieza Nº 78567)
Filter Gauge for Kohler Engines (Pieza Nº 99-4664)
Toro genuine filter gauge. Toro would like to remind you that fitment can vary by sub model, serial number, and/or production date of your equipment. Verify your model and serial number to confirm compatibility before ordering.
KIT, TRASH HOLDER (Pieza Nº TC26)
-
Nº Modelo
72910 -
Nº Serie
415300000 - 416303728 -
Nombre del producto
Serie 5000, 60" (152 cm), 25.5 cv (19.0 kW), 852 cc -
Marca del producto
Toro -
Tipo de producto
Riding Products -
Serie del producto
Zero Radius Turn, Professional 5000 Series -
Tipo de chasis
ZRT - LCE -
Anchura
60 inch / 152 cm -
Descarga
Side Discharge -
Fabricante del motor
Kawasaki -
Tipo de motor
4 Cycle -
Sistema de arranque del motor
Electric -
Tipo de transmisión
Hydrostatic -
Sistema de tracción
Rear WD
-
Engine: Battery
12V 300CCA -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Chassis: Tire Pressure
13 psi / 90 kPa -
Chassis: Height of Cut Range
1" - 5.5" (25-140mm) -
Engine: Engine Oil Type
filter chg 77 oz.(2.3 L); no filter chg 70 oz.(2.1 L); 10W-30 above -4F(-20C) or 5W-20 below 32F(0C) -
Drive System: Ground Speed
0-10 mph / 0-16kph -
Drive System: Gearbox Lubricant
HYPR-OIL 500 / 15w-50 Synthetic Motor Oil -
Engine: Ignition Coil Air Gap
0.011in (0.3mm) -
Engine: Engine Speed
3750+/-50 RPM