| Air Filter | Remote mounted, heavy-duty 2-stage air cleaner with evacuator valve |
|---|---|
| Alternator | 60 amps with electronic regulator |
| Battery | 12V |
| Brakes - Front | Hydraulic Disc |
| Brakes - Rear | Hydraulic Disc |
| Cargo Bed | Yes |
| Cargo Capacity | 2,849 lbs. (1295 kg) |
| Clutch | 7.5" (19 cm) clutch and pressure plate |
| Cooling System | Liquid Cooled |
| Crated Model | No |
| Differential Lock | Manual engage rear differential lock |
| Displacement | 962cc (58.7 ci) |
| Drivetrain | Gas |
| Frame | Steel space frame front frame and C-channel rear frame. |
| Fuel / Power Source | Gasoline |
| Fuel Capacity | 6 gallons (22.7 liters) |
| Fuel Filter | In tank filter sock. 10 micron polyester depth. |
| Fuel Pump | 12V internally regulated 42 psi in-tank |
| Gauges/Instrumentation | Fuel and coolant temperature gauges. Hour meter. Oil pressure, check engine and battery charge indicator lights. Tachometer and speedometer. |
| Ground Clearance | Rear: 7" (18 cm) |
| Height | Overall Top of ROPS: 75.8" (192.5 cm) |
| High Speed Lockout | Interlock key switch that prevents engine from running in 3rd gear. Limits engine RPM to 2,200 in 3rd gear high range (HDX gas). |
| Horn | Standard |
| Interlock | To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow hydraulics and rear PTO must be disengaged/switched off |
| Length | Overall w/o Bed: 127.6" (324 cm) Overall w/ Full Bed: 130" (330 cm) |
| Lights | Standard LED Headlights |
| Overall Width | 64.7" (164.3 cm) |
| Power Rating | 32.5 hp (24.2 kW) |
| Power Steering | Yes |
| Power Train (Engine Description) | Kubota® 972 EFI, 32.5 hp (24.2 kW), 4-cycle, liquid cooled, 962 cc, 3 cylinder |
| Rear Draw Bar | Standard |
| Rear Draw Bar Description | Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes. Maximum tongue weight of 600 lbs (272 kg). Trailers over 1500 lbs. require trailer brakes. |
| Roll-Over Protection (ROPS) | Standard |
| Seat | Bucket Seat |
| Starting | Electric |
| Steering System Description | Hydraulic power steering with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70 degrees on 2WD and 50 degrees on 4WD. |
| Suspension - Front | Independent system with dual "A" frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. |
| Suspension - Rear | DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers. |
| Suspension Travel - Front | 5.75" (14.6 cm) |
| Suspension Travel - Rear | 3" (7.6 cm) |
| Tires - Front | 20" x 9" - 12", 6-ply, Turf Tread |
| Tires - Rear | 24" x 12" - 12", 6-ply, Turf Tire |
| Total Vehicle Capacity | 3,249 lbs. (1477 kg) |
| Towing Capacity | 3,500 lbs. (1587 kg) |
| Traction Drive | 2WD |
| Transmission | Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen and external filter. |
| Vehicle Configuration | Standard |
| Vehicle Type | Heavy Duty |
| Weight | w/o Fuel:1,951 lbs. (887 kg) |
The Multi Pro WM spray system for Toro’s Workman® HD Series utility vehicles leverages the advanced spray system capability of Toro’s Multi Pro line and combines functionality with cutting-edge and intuitive sprayer controls. The result is the most advanced, efficient and accurate 200-gallon bed-mounted sprayer accessory for a utility vehicle on the market. Aggressive agitation, faster response times, consistent and accurate application rates, and intuitive rate set up, makes this the sprayer that has it all.
The 18 cubic foot (.5 cu. m.) capacity Top Dresser 1800 mounts to a Toro Workman or other utility vehicle and delivers a precise, productive performance with up to 8 mph (12.9 km/h) topdressing speed. A remote on-off application lever allows precise control/placement from the comfort of the operator's compartment.
For maximum performance choose the Toro® Top Dresser 2500 - a self-contained, all-wheel drive unit towed by a Toro® Workman® or other utility vehicle. The 25 cubic foot (.7 cu. m.) capacity coupled with 8 mph (12.9 km/h) topdressing speed will tackle the toughest topdressing jobs.
The Pro Force® debris blower provides greater air volume flow than any single nozzle turbine-type debris blower currently available. A wireless remote provides the capability to start and stop the engine, adjust engine throttle up and down for low to high RPM range of operation, and rotate the nozzle 360 degrees – all from the operator’s seat in a Toro® Workman® or similar utility vehicle. This blower delivers superior productivity and greater efficiency in jobs ranging from cleaning cart paths and other maintained paved areas, to blowing grass clippings, aeration cores or chaff, or other organic debris.
The Pro Force® debris blower provides greater air volume flow than any single nozzle turbine-type debris blower currently available. A wireless RF remote provides the capability to start and stop the engine, adjust engine throttle up and down for low to high RPM range of operation, and rotate the nozzle 360 degrees – all from the operator’s seat in a Toro® Workman® or similar utility vehicle. This blower delivers superior productivity and greater efficiency in jobs ranging from cleaning cart paths and other maintained paved areas, to blowing grass clippings, aeration cores or chaff, or other organic debris.
The Toro ProPass™ 200 broadcast style top dresser delivers extremely accurate spread patterns from ultra-light dustings to ultra-heavy aeration hole filling applications without any guesswork. A wireless controller provides the easiest method to set and control the spread functions. Available in both a utility vehicle mounted version and a towed version.
Series Models:
The Toro ProPass™ 200 broadcast style top dresser delivers extremely accurate spread patterns from ultra-light dustings to ultra-heavy aeration hole filling applications without any guesswork. A wireless controller provides the easiest method to set and control the spread functions. Available in both a utility vehicle mounted version and a towed version.
Series Models:
| Title | Documents |
|---|---|
| Workman HD Series Accessories | PDF - Brochure-en-CA |
| Workman HD Series Sell Sheet | PDF - Sellsheet-en-CA |
| Workman HDX Series Winter Accessory Guide | PDF - Brochure-en-CA |
Select your model year from the options below to view parts & manuals.
**See dealer for Warranty details.
