Dingo 222 Traction Unit
Product Information
- Model number: 22304
- Serial number: 900001 - 990001
- Product Type: Compact Utility Loaders
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Service Manual
-
Operator's Manual
-
Parts Catalogue
Tire Chain Kit, Dingo (Part number 100-4140)
Hydraulic Cylinder Kit, Sitework Systems (Part number 100-4163)
Traction Unit Flush Face Adapter Kit, Dingo (Part number 100-4750)
Flush Face Converter Kit, Dingo (Part number 100-4789)
Light Kit, Dingo Chain-Drive Traction Units (Part number 100-8940)
Narrow Tire Assembly (Part number 104-0572)
Spool Carrier Kit, Dingo (Part number 104-2661)
Hydraulic Valve Kit, Dingo (Part number 104-4221)
Remote Air Cleaner Kit, Dingo Model 22304 (Part number 104-4635)
Four-Spool Hydraulic Valve Kit, Dingo Model 22304 (Part number 104-7422)
Thigh Support Kit, Dingo Gas-Powered Wheel-Drive Traction Units (Part number 105-0330)
Sitework Tire Tube (Part number 105-4070)
Rubber Foot Mat (Part number 105-5805)
Tube-Tire (18 X 8.50-8) (Part number 106396)
Snow Cab, Dingo (Part number 20035)
Auger Head, Dingo (Part number 22400)
6" Auger, Dingo (Part number 22402)
6" Auger 8-Pack, Dingo (Part number 22402B)
9" Auger, Dingo (Part number 22403)
9" Auger 5-Pack, Dingo (Part number 22403B)
12" Auger, Dingo (Part number 22404)
12" Auger 4-Pack, Dingo (Part number 22404B)
15" Auger, Dingo (Part number 22405)
18" Auger, Dingo (Part number 22406)
24" Auger, Dingo (Part number 22407)
30" Auger, Dingo (Part number 22408)
Loader Bucket Attachment (Part number 22409)
Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 1 m³ (4 cubic feet)
Light Materials Loader Bucket Attachment (Part number 22410)
Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 0.2 m³, is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.
Four In One Bucket, Dingo (Part number 22411)
Backhoe, Dingo (Part number 22412)
Utility Blade Attachment (Part number 22414)
The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from pavements in one pass.
Rotary Broom, Dingo (Part number 22415)
Counterweight, Dingo (Part number 22417)
Adjustable Forks, Dingo (Part number 22418)
Leveler, Dingo (Part number 22419)
Bore Drive Head Attachment (Part number 22420)
The Toro® Dingo® boring unit allows you to dig under pavements and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.
Rod and Reamer Kit (Part number 22421)
Easily bore under driveways and pavements to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 48 cm. Bits and reamers up to 8.9 cm (3.5") in diameter.
Multi-Purpose Tool, Dingo (Part number 22423)
U-Blade, Dingo (Part number 22424)
Spare Wheel And Tire, Dingo (Part number 22428)
Stump Grinder Attachment (Part number 22429)
The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.
Vibratory Plow, Dingo (Part number 22437)
Tree Fork Attachment (Part number 22438)
The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to manoeuvre, helping you transport and position trees or shrubs exactly where you want them.
Two-Axle Trailer, Dingo (Part number 22439)
8" Auger, Dingo (Part number 22440)
Concrete Breaker, Dingo (Part number 22441)
Cement Mixer Attachment (Part number 22442)
This unique attachment will mix and pour up to 200 pounds (90.7 kg) of dry cement. The specially designed auger flighting inside the cement bowl keeps the cement in the bowl during mixing. This same auger design permits cement to be poured into fence post holes with the posts in place!
The Eliminator Scarifier/Groomer, Dingo (Part number 22443)
Tiller Attachment (Part number 22445)
The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 15 cm (6") deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.
10" Auger, Dingo (Part number 22446)
Trencher Head, Dingo (Part number 22447)
12" Auger Extension, Dingo (Part number 22448)
24" Auger Extension, Dingo (Part number 22449)
Capstan Adaptor, Dingo (Part number 22450)
Screw Anchor Adaptor, Dingo (Part number 22451)
Rear Stablizer, Dingo (Part number 22452)
Rock Auger, Dingo (Part number 22454)
Snowthrower, Dingo and Dingo TX (Part number 22456)
Over-the-Tire-Tracks, Dingo (U.S.A. model) (Part number 22457)
Agricultural Tire, Left Hand, Dingo (Part number 22458)
Trencher Head, Dingo (Part number 22459)
Narrow Tire and Wheel, Dingo (Part number 22460)
Agricultural Tire, Right Hand, Dingo (Part number 22461)
4" x 3' Trencher Rock Chain, Dingo (Part number 22462)
6" x 3' Trencher Rock Chain, Dingo (Part number 22463)
Trencher Crumber (Part number 22464)
Spring design, trencher accessory to help clean out trenches
4" x 3' Trencher Chain, Dingo (Part number 22466)
6" x 3' Trencher Chain, Dingo (Part number 22467)
8" x 3' Trencher Chain, Dingo (Part number 22468)
12" x 3' Trencher Chain, Dingo (Part number 22469)
Narrow Loader Bucket Attachment (Part number 22520)
Handle compact construction and remodelling sites by moving through 91.4cm gates without a problem. This 87.6cm wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tyres.
Grapple Rake, Compact Utility Loaders (Part number 22521)
Universal Swivel Auger Head, Dingo and Dingo TX (Part number 22801)
9" Backhoe Bucket, Dingo (Part number 23112)
12" Backhoe Bucket, Dingo (Part number 23113)
16" Backhoe Bucket, Dingo (Part number 23114)
NUT-LUG (Part number 242-50)
Sunshade (Part number 30088)
Spark Arrestor (Meets USDA Forest Service Standard 5100-1A) (Part number 98-9099)
Sand Sprocket (Part number 98-9937)
WHEEL AND TIRE ASM RH (PO (Part number 99-3140)
WHEEL AND TIRE ASM LH (PO (Part number 99-3141)
Hydraulic Relief Valve Kit, Dingo (Part number 99-4360)
Axle Retainer Kit, Dingo (Part number 99-5109)
-
Model number
22304 -
Serial number
900001 - 990001 -
Product Name
Dingo 222 Traction Unit -
Product Brand
Toro -
Product Type
Compact Utility Loaders -
Product Series
Compact Utility Loaders -
Chassis Type
CUL - Wheeled -
Engine/Motor Manufacturer
Kohler -
Engine/Motor Size
22 hp -
Engine/Motor Type
4 Cycle CARB1, EPA1 -
Engine Starter
Electric -
Transmission Type
Spool Valve -
Traction Type
Rear WD
-
Engine: Battery
12V 380CCA -
Engine: Spark Plug Gap
.030"/ .76mm -
Drive System: Ground Speed
0-3 mph -
Engine: Spark Plug
Champion Premium Gold 2071 -
Engine: Engine Oil Type
2.0 qts. 10w-30 -
Chassis: Tire Pressure
20-30 psi -
Engine: Engine Speed
3600±75 RPM -
Hydraulic: Hydraulic Pressure
3000 psi -
Hydraulic: Hydraulic Flow
3.7 gpm low flow circuit : 8.5 gpm high flow circuit -
Hydraulic: Hydraulic Reservoir
14.8 gallon -
Chassis: Wheels
Standard: 8x7.00, 5 bolt, drop center, heavy gauge steel -
Chassis: Tires
Std: 18x8.50-8_8-ply Turf Trd. Opt: 18x9.50-8_8-ply Chevron Trd or 18x8.50-10_8-ply Skid Steer Trd.