Sand Pro® 5040

  • Model: 08745
See All Items in Sand Pro® Series
  • The new unit was designed with the mechanic in mind, to reduce, simplify, and increase access to all scheduled maintenance. The majority of scheduled maintenance projects can be accessed by lifting the operator seat. For increased access, the side and center quarter panels can be taken off by removing just a few bolts.
  • The 3WD Series/Parallel™ traction drive improves traction in wet or heavy working conditions to get the job completed quickly. In traditional 3WD units all traction effort is lost as soon as one wheel slips. Series/Parallel™ ensures that you always have tractive effort with at least one wheel to keep your unit from getting stuck and losing precious time.
  • Quick connect hydraulics make it simple to connect or disconnect any of the powered attachments in under a minute. This eliminates the need for dedicated equipment.
  • For operator ease of use, and to improve the effectiveness of the steerable front attachments, hydraulic power steering is now available on the 5040 and a rugged gear drive system on the 3040. Both designs are now environmentally sealed to ensure long life and reduced maintenance.
  • The trusted Vanguard® engine is fuel efficient, runs cooler and features a fully pressurised oil lubrication system for longer life.
  • Easy to use and adapt to the next task. Having the right tool for the job increases the effectiveness of your crew and the efficiency of your operation. Attachments are designed to minimise operator influence to achieve the same result, regardless of whether a new or veteran employee performed the task.

Overview

The Sand Pro® 5040 is the definition of versatility and function. The Quick Attach System™ (QAS) for front, mid and rear attachments allows for under-a-minute attachment changes. With a powerful 18 hp (13.4 kW) engine and hydraulic power steering, be more productive with over 20 attachments, including the Flex Blade which raises and lowers hydraulically. Each attachment was specifically designed to take the operator influence out of the equation for high performance and a consistent surface finish.

Features

Steerable Front Attachments
Steerable Front Attachments
Steerable front attachments on the Sand Pro® 5040 give operators the precision never before offered in this industry. The newly designed Flex Blade is adjustable to different environments (wet/dry), scarify, level and smooth in the same pass. Improve the operators ability to direct the attachment into and out of tight areas, like around dugouts or base path contours. Hydraulic float position and steerable blade reduces operator influence and the potential for damage. Combined, these features improve the consistency between fields, operators, and weather conditions.
Maintenance Friendly Layout
Maintenance Friendly Layout
The new unit was designed with the mechanic in mind, to reduce, simplify, and increase access to all scheduled maintenance. The majority of scheduled maintenance projects can be accessed by lifting the operator seat. For increased access, the side and center quarter panels can be taken off by removing just a few bolts.
3WD Series/Parallel™ Traction Drive
3WD Series/Parallel™ Traction Drive
The 3WD Series/Parallel™ traction drive improves traction in wet or heavy working conditions to get the job completed quickly. In traditional 3WD units all traction effort is lost as soon as one wheel slips. Series/Parallel™ ensures that you always have tractive effort with at least one wheel to keep your unit from getting stuck and losing precious time.
Quick Connect Hydraulics
Quick Connect Hydraulics
Quick connect hydraulics make it simple to connect or disconnect any of the powered attachments in under a minute. This eliminates the need for dedicated equipment.
Manoeuvrable Steering
Manoeuvrable Steering
For operator ease of use, and to improve the effectiveness of the steerable front attachments, hydraulic power steering is now available on the 5040 and a rugged gear drive system on the 3040. Both designs are now environmentally sealed to ensure long life and reduced maintenance.
Mid-Mount System
Mid-Mount System
With the mid-mount system, a flex mounted toolbar can be adjusted to flex backwards when it comes in contact with anything from rocks or other rigid objects to prevent gouging or wash boarding. Multiple locking depth settings to ensure consistent depth of scarification from day to day or between operators. A mid-mount levelling system is also available to make quick work of the difficult projects like around dugouts or player positions.
Power Packed Engines
Power Packed Engines
The trusted Vanguard® engine is fuel efficient, runs cooler and features a fully pressurised oil lubrication system for longer life.
Quick Attach System™ (QAS)
Quick Attach System™ (QAS)
With the Quick Attach System™ (QAS), anyone can switch from one attachment to another in less than a minute, with no tools required! Match the machine to the environment to get your fields back into playing condition The QAS allows you to do more with less, and get the job done faster. Rear QAS is standard on the Sand Pro® 3040 and 5040, front QAS™ is optional on the Sand Pro® 5040.
Ease of Use
Ease of Use
Easy to use and adapt to the next task. Having the right tool for the job increases the effectiveness of your crew and the efficiency of your operation. Attachments are designed to minimise operator influence to achieve the same result, regardless of whether a new or veteran employee performed the task.

Specifications

Air Filter Remote mounted 3-phase Donaldson® air cleaner
Battery 12V
Controls Hand operated choke, throttle, and hydraulic control for raising/lowering with float. Foot pedal controls traction forward/reverse speed. Front and rear hydraulic lift and lower controls
Cooling System Air Cooled
Displacement 570 cc
Frame Tricycle vehicle with welded rectangular tubular steel frame construction. Rear engine placement
Fuel Capacity 18.9 litres
Fuel Type Petrol
Gauges/Instrumentation Hour Meter
Ground Clearance 15.2 cm
Ground Speed - Forward 0 - 10 mph
Ground Speed - Reverse 0 - 4.3 mph
Height 114.9 cm
Hydraulic Oil Toro PX Hydraulic Oil; 26.4 litre system capacity. Polyethylene reservoir to reduce corrosion. 10 (nominal) micron replaceable cartridge
Interlock Neutral interlock switch, seat switch.
Length 171.5 cm
Oil Capacity with Filter 1.8 litres
Optional Accessories QAS A-Frame Assembly, 400-Hour Filter Maintenance Kit, Rear Remote Hydraulics, Selectable Front and Rear Hydraulic Kit, Variable Orifice Kit, Light Kit, Speed Control Kit, Hitch/Tow Bar, Front Weight Kit, Smooth Tire, Turf Tyre
Overall Width 147 cm
Parking/Service Brakes Hand actuated brake lever.
Power Steering Yes
Power Train (Engine Description) Vanguard®, V-twin cylinder, 4-stroke, OHV, air-cooled, petrol engine with cast iron sleeves. 18 hp (13.4 kW) at 3600 rpm. Displacement: 570 cc. Electronic ignition. Full pressure lubrication, oil filter. Base mounted engine and pump with 4 isolation mounts
Rear Attachment Hydraulic Lift Standard
Sound Level 83 dB(A) at operator ear, under normal operating conditions.
Starting Key Start
Steering System Description Hydraulic power steering. 15" (38 cm) diameter steering wheel
Tires - Rear 22 x 11.00-8, 2-ply, Knobby Tread
Traction Drive Direct driven hydrostatic variable displacement piston pump to 3 hydraulic motors for 3WD. Large, front mounted hydraulic cooler and fan. Foot pedal control, forward/reverse. Patented Series/Parallel hydraulic traction system keeps three wheels working together, virtually eliminates spin-outs
Traction Drive 3WD
Tyres - Front 22 x 11.00-8, 2-ply, Knobby Tread
Vehicle Configuration Standard
Weight 421.8 kg, net weight less fluids
Wheelbase 108 cm

Accessories

Front Lift Frame, Sand Pro 3040 and 5040 (Part number 08712)
Manual Blade, Sand Pro 3040 and 5040 (Part number 08714)
LED LIGHT KIT, SAND PRO (Part number 08740)
Tooth Rake, Sand Pro 3040 and 5040 (Part number 08751)
Spring Rake, Sand Pro 3040 and 5040 (Part number 08752)
Rear Broom, Sand Pro 3040 and 5040 (Part number 08753)
Finish Grader, Sand Pro 3040 and 5040 (Part number 08754)
Spiker, Sand Pro 3040 and 5040 (Part number 08755)
Drag Mat Carrier System, Sand Pro 3040 and 5040 (Part number 08756)
QAS Nail Drag, Sand Pro/Infield Pro 3040 and 5040 Traction Unit (Part number 08761)
QAS Bunker Pump, Sand Pro/Infield Pro 3040 and 5040 Traction Unit (Part number 08765)
QAS Flex Tooth Rake, Sand Pro/Infield Pro 3040 and 5040 Traction Unit (Part number 08767)
Rear Remote Hydraulic Kit, Sand Pro 3040 and 5040 (Part number 08781)
HYDRAULIC SWITCH KIT, SANDPRO 5040 08 (Part number 08783)
MIDMOUNT TOOLBAR SYStem (Part number 08838)
Weight Kit, Greensmaster and Sand Pro/Infield Pro Traction Unit (Part number 100-6442)
PLUG-PLASTIC (YELLOW) (Part number 107-1576)
Yellow Hydraulic Fluid Cap - Tethered (Part number 107-2174)
PREMIUM ALL PURPOSE GREASE (Part number 108-1190)
PREMIUM ENGINE OIL SAE 30 DRUM (Part number 108-1196)
PREMIUM ENGINE OIL SAE 30 PAIL (Part number 108-1197)
SPEED LIMITER KIT (Part number 110-1371)
DRAW BAR ASM, SAND PRO (Part number 110-1375)
WHEEL/TIRE ASM-SMOOTH (Part number 112-0034)
Drag Mat Assembly, Sand/Infield Pro 3040 and 5040 Traction Unit (Part number 112-1424)
Variable Orifice Kit, Sand/Infield Pro 3040 and 5040 Traction Unit (Part number 112-1433)
Hourmeter, Wireless Hourmeter System (Part number 115-4754)
DECAL (Part number 115-5620)
SCREEN-SPARK ARRESTOR (Part number 119-7185)
TIRE-TURF TREAD (Part number 121-9072)
ARMREST KIT (Part number 126-2058)
PX HYD FLUID (5 GAL) (Part number 133-8086)
PX HYD FLUID (55 GAL) (Part number 133-8087)
MVP KIT-SANDPRO (Part number 30035)
Red Paint - Gallon Can (Part number 361-11)
PAINT-AEROSOL, DARK METALLIC GRAY (Part number 361-12)
PAINT-SPRAY, TORO SEMI-GLOSS BLACK (Part number 361-9)
MVP KIT 1000 HOUR, SANDPRO 3040/5040 (Part number 44957)
Red Paint - Quart Can (Part number 5340)
TIRE-2PLY, KNOBBY (Part number 85-8290)

Documents

Title Documents
SandPro-5040-Brochure-7-19-2019.pdf PDF - Brochure-en-GB

Parts & Manuals

Select your model year from the options below to view parts & manuals.