Série 4000 de 152 cm (60 po), 18 kW (25,5 cv), 852 cm³
Informations produit
- Numéro de modèle : 74054
- Numéro de série : 414380000 - 415399999
- Type de produit : Riding Products
Chargement...
Schémas d'assemblage
Rechercher une pièce dans des schémas d'assemblage :
-
Manuel d'entretien
-
Manuel de l'utilisateur
-
Catalogue de pièces
-
Garantie produit
-
Instructions d'installation
-
Addenda
Z-Master Anti-Scalp Kit (Trim Side) (Réf. 108-4140)
Toro OEM anti-scalp deck wheels. These wheels help prevent the deck from coming in contact with the ground when passing over a high spot, thus preventing the blade from slicing off or "scalping" large clumps of grass.
Hypr-Oil™ 500 (quart) (Réf. 114-4713)
High Performance Hydro Oil
Hypr-Oil™ 500 (gallon) (Réf. 114-4714)
High Performance Hydro Oil
HYPR-OIL 500-5 GALLON (Réf. 114-4715)
Jack Kit With Adapter, Zero-Turn-Radius Side-Discharge or Rear-Dischar (Réf. 126-7282)
Jack Kit Adapter, Zero-Turn-Radius Side-Discharge or Rear-Discharge Ri (Réf. 126-7283)
Striper Kit (Réf. 126-7882)
Riding Mower Jack Kit (Réf. 127-6666)
Genuine Toro jack mount kit. Mounts to the front of the mower and allows the owner to raise the mower to gain access to the underside of the deck to check blades or wash the deck. To best protect your investment and maintain optimal performance of your turf equipment, count on Toro genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.
60 Inch Recycler Kit (Réf. 139-6655)
The 60 in. Recycler Kit, when installed on compatible 42 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. These are returned under the mower back into the soil to serve as natural fertilizer. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.
20.5 Inch Hi-Flow Blade (Réf. 140-1240)
Toro 20.5 Inch OEM Hi-Flow blade. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Lame Atomic de 42 cm (20,5 po) (Réf. 140-1241)
Lames Atomic Toro OEM de 42 cm (20,5 po). La lame Atomic est souvent qualifiée de "style Gator" ou "lame Gator". Elle offre la meilleure qualité de coupe tout en assurant le déchiquetage. Cette lame Toro a de nombreuses utilisations. Vérifiez bien la marque et le numéro de série pour être sûr d’avoir la bonne pièce.
20.50 Inch Medium Flow Blade (Réf. 140-4853)
Toro 20.5 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
20.50 Inch Low Flow Blade (Réf. 140-4854)
Toro 20.50 Inch OEM Low Flow blade. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
20.5 Inch Recycler Blade (Réf. 140-4855)
Toro 20.5 Inch OEM Recycler blade. Recycler blades. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify make and serial number to ensure the correct part.
Hi-Flow20.5 Inch Blade Pack (6) (Réf. 140-4877)
Toro 16.5 Inch OEM Hi-Flow blade pack. (6) Hi-Flow blades. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Mid Flow 20.5 Inch Blade Pack (6) (Réf. 140-4878)
Toro 20.5 Inch OEM Medium Flow blade pack. (6) Medium Flow blades. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Low Flow 20.5 Inch Blade Pack (6) (Réf. 140-4879)
Toro 20.5 Inch OEM Low Flow blade pack. (6) Low Flow blades. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Atomic 20.5 Inch Blade Pack (6) (Réf. 140-4880)
Toro OEM Atomic blade pack. (6) 20.5 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Recycler 20.5 Inch Blade Pack (6) (Réf. 140-4881)
Toro 20.5 Inch OEM Recycler blade pack. (6) Recycler blades. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
TRIMMER MOUNT (Réf. 144-2665)
KIT, JACK MOUNT (Réf. 144-2676)
HARDTOP SUN CANOPY (Réf. 144-3719)
60" CHUTE GATE KIT (Réf. 144-6572)
Semi Pneumatic Assembly 15 x 6.50-6 (Réf. 145-1919)
Genuine OEM Part
Handle Extension Kit (Réf. 145-3615)
Genuine OEM Part
KIT-RED ELECTRIC DECK LIFT (Réf. 147-1660)
Pneus radiaux sans air pour gazon MICHELIN® X® TWEEL® (46 cm/26 po) (Réf. 147-4600)
Les pneus radiaux sans air pour gazon MICHELIN® X® TWEEL® sont la prochaine « révolution » dans le monde de la tonte commerciale. Le pneu radial sans air pour gazon MICHELIN X TWEEL a toutes les qualités que vous recherchez dans un pneumatique, mais sans jamais avoir besoin d’air. Fini les crevaisons, les temps d’arrêt, les kits de rustine ou les pneus de rechange. Et en matière d’usure, ce « pneu » affiche une durée de vie trois fois plus longue que celle d’un pneumatique.
BLADE-20.50 HIGH FLOW (Réf. 147-6252)
6 PACK-BLADE, 20.50 HIGH FLOW (Réf. 147-6256)
Bucket Mount Kit, Z Master 2000 or 4000 Series Riding Mower (Réf. 147-6345)
Universal Mount Kit, Z Master 2000 or 4000 Series Riding Mower (Réf. 147-6346)
KIT-BAFFLE, TURBO FORCE (Réf. 147-7362)
KIT-2IN RECIEVER HITCH (Réf. 161-2810)
Spark Arrestor Screen (Réf. 75-6880)
4000 Series E-Z Vac Blower & Drive Kit for 60" Deck (Réf. 78466)
4000 Series E-Z Vac Blower & Drive Kit for 60" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)
-
Numéro de modèle
74054 -
Numéro de série
414380000 - 415399999 -
Nom du produit
Série 4000 de 152 cm (60 po), 18 kW (25,5 cv), 852 cm³ -
Marque du produit
Toro -
Type de produit
Riding Products -
Série de produit
Zero Radius Turn, Commercial 4000 Series -
Type de Châssis
ZRT - LCE -
Largeur de travail
60 inch / 152 cm -
Éjection
Side Discharge -
Fabricant du moteur
Kawasaki -
Taille de moteur
25.5 hp -
Type de moteur
4 Cycle -
Démarreur
Electric -
Type de transmission
Hydrostatic -
Type de Traction
Rear WD
-
Engine: Battery
12V 300CCA -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Chassis: Tire Pressure
13 psi / 90 kPa -
Engine: Engine Oil Type
filter chg 77 oz.(2.3 L); no filter chg 70 oz.(2.1 L); 10W-30 above -4F(-20C) or 5W-20 below 32F(0C) -
Drive System: Ground Speed
0-10 mph / 0-16kph -
Chassis: Height of Cut Range
1.5" - 5.5" (38-140mm) -
Engine: Engine Speed
3750+/-75 RPM -
Drive System: Gearbox Lubricant
HYPR-OIL 500