ProCore® 648s EFI (California Model)

  • Modèle: 09960C
Voir tous les articles dans ProCore® 648s Series Turf Aerator
  • The precise configuration virtually eliminates hopping, rocking and unnecessary vibration
  • Smart technology features an electronically controlled hydrostatic 3-wheel drive that maintains consistent hole spacing on slopes
  • Delayed Mode allows operators to easily target the coring head for precise drops or raises, simplifying starting and ending passes or navigating in-ground obstacles like irrigation heads
  • View the Toro Titan Tines Guide & Catalog
  • The onboard storage offers ample space for a hot beverage, field notes, a sweatshirt, or extra tines
  • All ProCore 648 accessories will work on ProCore 648s
  • RotaLink™ geometry enables clean tine entry and exit, ensuring high-quality results and a quick return to play
  • The controller offers adjustable aeration in 0.25” (5 mm) increments, ensuring optimal aeration for turf needs
  • The redesigned operator interface enables simple one-handed operation from either side, allowing operators to walk forward and reducing fatigue
  • The TrueCore™ sensing system automatically adjusts tine depth to match ground undulations, ensuring a consistent coring depth of up to 4" (10.2 cm)
  • Extend your workday or start early with the accessory five LED light kit to illuminate your path

Présentation

The ProCore 648s builds on the tremendous legacy of the ProCore 648 by incorporating proven technology and even more innovative features while preserving the time tested design elements that changed the way you aerate. Revised controls improve ergonomics and allow single handed operation. Hole spacing and true tine depth are now set and saved in the InfoCenter. The onboard controller is continuously monitoring key operating parameters to improve after aeration turf condition and allow the operator to easily target coring head drop and raise. A tighter turning radius with reduced wheel scrubbing and the ability to easily increase speed during turns increases productivity. Proven reliability,improved performance and exciting innovation - that’s what makes the ProCore 648s the new superior choice.

Caractéristiques

Smooth, Quiet, Powerful
Smooth, Quiet, Powerful
To give the ProCore 648s its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.
Electronically Controlled Drive
Electronically Controlled Drive
This smart technology enhancement utilizes an electronically controlled hydrostatic 3-wheel drive which maintains more consistent hole spacing on sloping terrain. It also essentially eliminates front wheel scrub in turns while providing a tighter turning radius. Operators can easily increase speed during turns, improving efficiency.
Delayed Mode
Delayed Mode
When operating in Delayed Mode, the onboard controller continuously monitors key operational parameters, reducing grass tufting when coring head drops to start a pass. It also allows operators to easily target where they want the coring head to drop or raise, making starting and ending passes or jumping up and over an in-ground obstacle, like an irrigation head, much easier.
Watch the Video
Onboard Storage
Onboard Storage
Bring a hot beverage, field notes, a sweatshirt, or carry some extra tines, the onboard storage has plenty of room.
Compatibility
Compatibility
All ProCore 648 accessories will work on ProCore 648s.
Deep, High Quality Holes
Deep, High Quality Holes
RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result and a quick return to play.
InfoCenter Smart Settings
InfoCenter Smart Settings
Set and Save precise hole depth and spacing to ensure consistent, condition-driven aerification that yields outstanding results. This controller allows much wider range of adjustment in 0.25” (5 mm) increments, ensuring just the right amount of aeration to match the needs of the turf.
Ergonomics
Ergonomics
Completely redesigned operator handle with intuitive controls that allows simple one hand operation from either side of the machine, allowing operators to walk and keep focus forward with less fatigue. The floating handle also allows any height person to operate the machine comfortably.
TrueCore™ Ground Following
TrueCore™ Ground Following
TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 4" (10.2 cm).
LED Light Kit
LED Light Kit
To get an early start or extend the work day, illuminate the path with the accessory five LED light kit.

Caractéristiques techniques

Accessoires en option Kit d'éclairage à DEL, Kit andaineuse, Décrottoirs de pneus, Kit rouleau arrière, Outil QuickChange®
Aeration Type Faible profondeur
Capacité du réservoir de carburant 28,4 litres (7,5 gallons), essence.
Commandes Redondance des barres de présence de l'utilisateur, barres de démarrage/arrêt de l’aération et molettes de vitesse de déplacement sur la poignée. L'étalonnage de la longueur des louchets, la profondeur d'aération et l'espacement avant des trous sont réglés et sauvegardés dans l'InfoCenter. Arrêt en cas de choc, commutateur d’abaissement différé ou immédiat, commutateur de marche/réglage/arrêt du régulateur de vitesse, commutateur d’aération ou de transport et commutateur d’éclairage à DEL en option situés sur la console de l’utilisateur. Allumage et tachymètre sur la console latérale. Accélérateur et starter sur le moteur.
Construction Bâti en acier soudé avec ensemble vilebrequin et bras moulé.
Empattement 113 cm (44,5 po)
Freins Hydrostatique
Garde au sol 12,1 cm (4,75 po)
Hauteur Tête relevée : 114,3 cm (45 po), Tête abaissée : 92,7 cm (36,5 po), Poignée relevée : 153 cm (60,7 po), Poignée abaissée : 119,7 cm (47,5 po)
Jauges/Instruments InfoCenter™, tachymètre.
Largeur 127,3 cm (50,12 po)
Largeur de chenilles 97,3 cm (38,3 po)
Largeur opérationnelle (largeur de travail) 127,3 cm (50,12 po)
Longueur Poignée abaissée : 293,1 cm (116,3 po) Poignée relevée : 231,3 cm (91,8 po)
Moteur Kohler®, bicylindre, refroidi par air, 17,1 kW (23 cv) brut, 14,2 kW (19 cv) net à 3 000 tr/min, 674 cm³ (41 po³) de cylindrée. Filtre à air sec grande capacité, élément remplaçable. Filtre à huile externe amovible, 1,9 litre (2 quarts).
Nombre de têtes d'aération 6
Pneus 20" x 10" - 10", 2 plis, sculpture lisse
Poids 744,7 kg (1 642 lbs)
Système électrique Alternateur/générateur 12 volts, 15 A à charge régulée. Groupe BCI nº : batterie U1, 300 A en démarrage à froid à -18° C (0° F). Commande logique de microprocesseur.
Système hydraulique Filtre amovible à distance. Capacité de 13,2 litres (3,0 gallons), liquide hydraulique longue durée Toro PX.
Transmission (système) Entraînement hydrostatique en série-parallèle, circuit fermé. 3RM, mais passe automatiquement à 2RM en mode aération et pour les déplacements en marche avant avec la tête de carottage relevée, pour permettre un rayon de braquage plus court. Pompe de type à piston à cylindrée variable et commande électronique. Entraînement de moteurs de roues à petite vitesse et couple élevé.
Verrouillages de sécurité Présence de l'utilisateur, verrou d'embrayage, point mort, relevage/abaissement de la tête d’aération.Verrou d'embrayage, point mort, relevage/abaissement de la tête d’aération.
Vitesse d'utilisation Vitesse de transport : Marche avant : de 0 à 7,2 km/h (0 à 4,5 mi/h); Marche arrière : de 0 à 3,2 km/h (0 à 2 mi/h); Aération : Marche avant : de 0 à 4 km/h (0 à 2,5 mi/h); Marche arrière : de 0 à 3,2 km/h (0 à 2 mi/h)

Accessoires

Windrower Kit
Windrower Kit (Réf. 09220)
Tire Scraper Kit
Tire Scraper Kit (Réf. 09225)
Rear Roller Kit
Rear Roller Kit (Réf. 09234)
4 Tine Head
4 Tine Head (Réf. 09719)
Logo des pièces d’origine Toro
Mini Tine Head Kit (Réf. 09736)
Logo des pièces d’origine Toro
Mini Tine Head Kit (Réf. 09737)
Logo des pièces d’origine Toro
Needle Tine Head Kit (Réf. 09739)
3 Tine 3/4" Head Set
3 Tine 3/4" Head Set (Réf. 09794)
4 Tine 3/4" Head Set
4 Tine 3/4" Head Set (Réf. 09796)
3 Tine 7/8" Head Set
3 Tine 7/8" Head Set (Réf. 09797)
Logo des pièces d’origine Toro
Light Kit (Réf. 09962)
Yellow Hydraulic Fluid Cap - Tethered (Réf. 107-2174)
PREMIUM ALL PURPOSE GREASE (Réf. 108-1190)
Hourmeter, Wireless Hourmeter System (Réf. 115-4754)
FILTER-FUEL, INLINE (Réf. 115-7854)
GUARD-TURF, 3-TINE (SHORT) (Réf. 120-1044)
GUARD-TURF, 4-TINE (SHORT) (Réf. 120-1045)
GUARD-TURF, 4-TINE, LONG (Réf. 120-1046)
GUARD-TURF, 5 TINE, SHORT (Réf. 120-1047)
GUARD-TURF, 6 TINE SHORT (Réf. 120-1050)
GUARD-TURF, 3-TINE, LONG (Réf. 120-1051)
GUARD-TURF, 5 TINE, LONG (Réf. 120-1052)
GUARD-TURF, 6 TINE LONG (Réf. 120-1053)
PREMIUM ENGINE OIL 10W30 (55 GAL) (Réf. 121-6392)
PREMIUM ENGINE OIL 10W30 (5 GAL) (Réf. 121-6393)
HEAD BEARING KIT (Réf. 131-4876)
PX HYD FLUID (5 GAL) (Réf. 133-8086)
PX HYD FLUID (55 GAL) (Réf. 133-8087)
Red Spray Paint - Case of 6 (Réf. 361-10)
Red Paint - Gallon Can (Réf. 361-11)
PAINT-AEROSOL, DARK METALLIC GRAY (Réf. 361-12)
PAINT-SPRAY, TORO SEMI-GLOSS BLACK (Réf. 361-9)
Red Paint - Quart Can (Réf. 5340)
SCREEN-SILENCER, EXHAUST (Réf. 93-9911)

Documents

Titre Documents
2025 Titan Tine Poster_040725.pdf PDF - Product Literature-fr-CA
2025 Titan Tines Catalog_081925.pdf PDF - Product Literature-fr-CA
ProCore_648s_Brochure_091323.pdf PDF - Brochure-fr-CA
ProCore_648s_Sell_Sheet_080125.pdf PDF - Sellsheet-fr-CA

Pièces et manuels

Sélectionnez votre année-modèle parmi les options ci-après pour visualiser les pièces et les manuels.

09960C Numéro de série
400000000-999999999