GrandStand® 48" (122 cm), 22 cv (16.4 kW), 726 cc
Información sobre productos
- Nº Modelo: 72504
- Nº Serie: 418000000 - 419999999
- Tipo de producto: Riding Products
Cargando...
Dibujos de ensamblaje
Buscar una piezas en los dibujos de ensamblaje:
-
Manual del operador
-
Catálogo de piezas
-
Garantía del Producto
Hypr-Oil™ 500 (quart) (Pieza Nº 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon) (Pieza Nº 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
HYPR-OIL 500-5 GALLON (Pieza Nº 114-4715)
Oil Filter Replacement (Pieza Nº 119-5852)
This genuine Toro OEM replacement oil filter removes contaminants — including dirt, metal particles, and other debris — from your engine oil as it circulates, helping to protect critical engine components from wear and extending the life of both the oil and the engine. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your Toro equipment.
Outer Air Filter Element Replacement (Pieza Nº 119-5944)
This genuine Toro OEM replacement air filter is your engine's first line of defense against the dirt and debris that is thrown up during mowing. When functioning correctly, the air filter prevents particles from reaching the carburetor and entering the engine, protecting cylinders, pistons, and other internal components from accelerated wear. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your equipment.
Repuesto de elemento de filtro de aire externo (Pieza Nº 119-5945)
Este filtro de aire de repuesto OEM original de Toro® es la primera línea de defensa del motor contra la tierra y los residuos que se levantan durante la siega. Cuando funciona correctamente, el filtro de aire impide que lleguen partículas al carburador e ingresen en el motor, lo cual permite proteger los cilindros, pistones y demás componentes internos del desgaste rápido. Consulte su manual del operador para ver los intervalos de reemplazo recomendados y confirmar la compatibilidad con su equipo.
Fuel Filter Replacement (Pieza Nº 120-2235)
This genuine Toro OEM replacement fuel filter prevents dust, water, and fuel contaminants from reaching the engine's carburetor or fuel injection system, protecting cylinders, pistons, and other components that would otherwise require costly repair. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your equipment.
Divisor de arnés de cables GrandStand (Pieza Nº 121-5988)
Este divisor de arnés de cable OEM original de Toro® está diseñado para los cortacéspedes de plataforma GrandStand y permite conectar simultáneamente varios accesorios eléctricos, como kits de iluminación y otros accesorios electrónicos, a una única fuente de alimentación en el cortacésped. Esto elimina la necesidad de desconectar un accesorio para conectar otro y simplifica el cableado al utilizar varios accesorios eléctricos a la vez. Verifique su modelo y número de serie antes de realizar un pedido.
Tratamiento de combustible de 12 onzas (355 ml) (Pieza Nº 131-6572)
El tratamiento de combustible Toro Premium ayuda a asegurar un funcionamiento limpio y fiable y protege el motor. Apto para cortacéspedes, sopladores de nieve, desbrozadoras, sopladores de hojas y otros aparatos equipados con un motor pequeño. El uso del tratamiento de combustible Toro en cada repostaje ofrece protección para motores pequeños de dos y cuatro tiempos.
GrandStand Speed Setting Tool (Pieza Nº 132-7595)
This genuine Toro OEM speed setting tool is designed for GrandStand stand-on mowers and is used to accurately calibrate and adjust the mower's ground speed settings. Correct speed calibration ensures consistent, predictable ground speed response from the drive controls — important both for operator efficiency and for ensuring consistent mowing results across a property. Typically used during initial setup and after drive system service. Verify your model and serial number before ordering.
GrandStand Weight Kit (Pieza Nº 133-1428)
Weight Kit for Toro Grandstand models. Helps distribute weight for a smooth ride and an even cut on rough terrain. This Toro OEM weight kit helps improve traction and stability on slopes and uneven terrain by adding ballast to the front or rear of your mower. Verify your model and serial number to confirm compatibility before ordering.
Chute Gate Kit with Bag for GrandStand Mower (Pieza Nº 133-1434)
Toro chute gate kit with bag for grandstand mower. This Toro OEM discharge chute kit allows the operator to direct or block the flow of clippings from the mower deck, helping to prevent debris from reaching flower beds, driveways, or bystanders. Verify your model and serial number to confirm compatibility before ordering.
Trash Container Kit (Pieza Nº 133-1435)
This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.
Roller Stripping Kit (Pieza Nº 133-1436)
The Toro Striping Kit allows you to create "ballpark" stripes and patterns in your lawn while you mow. Striping kits lay the grass down in the direction of travel. The Toro OEM striping kit creates defined light and dark stripes in your lawn by pressing grass down in the direction of travel as you mow — the contrast in light reflection produces the 'ballpark' stripe effect. The kit's downward pressure is adjustable, allowing you to vary the intensity of the stripe. Verify your model and serial number to confirm compatibility before ordering.
GrandStand Light Kit (Pieza Nº 133-1437)
Por lo que respecta a la fiabilidad, Toro suministra piezas de repuesto diseñadas con las mismas especificaciones de ingeniería que nuestros equipos. Para su tranquilidad, exija piezas genuinas Toro.
GrandStand Electric Accessory Port (Pieza Nº 133-1438)
Para su tranquilidad, exija piezas genuinas Toro.
GrandStand Height of Cut Block Kit (Pieza Nº 133-1439)
Para su tranquilidad, exija piezas genuinas Toro.
GrandStand Anti-scalp & Wear Bar Kit (Pieza Nº 133-1440)
Toro OEM anti-scalp deck wheels and wear bar. These wheels help prevent the deck from coming in contact with the ground when passing over a high spot, thus preventing the blade from slicing off or "scalping" large clumps of grass. Toro OEM anti-scalp deck wheels are designed to prevent the mower deck from making contact with the ground when passing over raised spots or uneven terrain, protecting the blades from impact damage and preventing the lawn from being gouged or stripped. Verify your model and serial number to confirm compatibility before ordering.
GrandStand Trimmer Mount Kit (Pieza Nº 133-1441)
Por lo que respecta a la fiabilidad, Toro suministra piezas de repuesto diseñadas con las mismas especificaciones de ingeniería que nuestros equipos. Para su tranquilidad, exija piezas genuinas Toro.
GrandStand Hydraulic Oil Change Kit (Pieza Nº 133-1457)
GrandStand Hydraulic Oil Change Kit contains 2 drain bolts, sealing washer, filter cap, oil cap O ring and filter. Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Kit de intermitencia para baliza GrandStand. (Pieza Nº 133-1495)
Por lo que respecta a la fiabilidad, Toro suministra piezas de repuesto diseñadas con las mismas especificaciones de ingeniería que nuestros equipos. Para su tranquilidad, exija piezas genuinas Toro.
Toro Genuine 5-Gallon bucket. (Pieza Nº 133-2533)
This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.
Hydraulic Cap Lock Kit (Pieza Nº 136-5420)
Hydraulic Cap Lock Kit. Verify your model and serial number to confirm compatibility before ordering.
GrandStand Series Bucket Mount Kit (Pieza Nº 136-5681)
Toro OEM bucket mount kit. Saves you time, money, and hassle when you’re in the seat trying to get the day's cutting done. Verify your model and serial number to confirm compatibility before ordering.
GrandStand Bagger Enhancement Kit (Pieza Nº 139-1529)
Este kit de mejora de ensacado OEM original de Toro® está diseñado para los cortacéspedes de plataforma GrandStand de Toro® y mejora el rendimiento de la recolección en condiciones exigentes, incluida hierba pesada o mojada, césped grueso y ensacado de follaje otoñal. Ya sea que lo compre al adquirir una nueva máquina o como una mejora estacional, este kit restablece la eficiencia del ensacador cuando el ensacado estándar rinde menos de lo esperado. Verifique su modelo y número de serie antes de realizar un pedido.
48 inch Recycler Kit (GrandStand) (Pieza Nº 139-6650)
Este kit de Recycler OEM original de Toro® de 48" (122 cm) está diseñado para los cortacéspedes de plataforma GrandStand de Toro y convierte la carcasa en un equipo de mulching Recycler completo. Una vez instalado, el sistema Recycler patentado tritura los recortes de 6 a 8 veces y los devuelva al césped en forma de fertilizante fino, natural y con gran cantidad de nutrientes y, de este modo, elimina la necesidad de embolsarlos o rastrillarlos en la mayoría de los casos. Este es uno de los artículos de mejora más populares en el momento de la compra para los nuevos propietarios de cortacéspedes GrandStand que desean maximizar el valor de su máquina desde el primer día. Verifique su modelo y número de serie antes de realizar un pedido.
Neumáticos de césped radiales sin aire MICHELIN® X® TWEEL® (18" (46 cm)) (Pieza Nº 139-7890)
Han llegado los neumáticos de césped radiales sin aire MICHELIN® X® TWEEL®, la próxima "revolución" en la siega comercial. El neumático de césped radial sin aire MICHELIN X TWEEL tiene todas las cualidades que usted busca en un neumático convencional, pero nunca necesita aire. Se acabaron para siempre los pinchazos (con la pérdida de tiempo asociado), los kits de parches o los neumáticos de recambio. Y en cuanto a la durabilidad, este “neumático” tiene una vida útil tres veces mayor que la de un neumático convencional.
16.5 Inch Hi-Flow Blade (Pieza Nº 140-1243)
This Toro OEM 16.5-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Kit de ruedas giratorias inflables (Pieza Nº 140-4311)
Este kit de ruedas giratorias neumáticas OEM original de Toro® reemplaza las ruedas giratorias delanteras gastadas o dañadas en cortacéspedes de Toro compatibles con un conjunto de ruedas neumáticas que brinda mayor calidad de desplazamiento y maniobrabilidad en comparación con neumáticos desinflados o ruedas macizas. Las ruedas neumáticas absorben los pequeños baches e irregularidades de la superficie que las ruedas sólidas transmiten directamente a la carcasa, lo que permite lograr un corte más uniforme en terrenos irregulares. Un repuesto para elementos de desgaste que también mejora el desempeño. Verifique su modelo y número de serie antes de realizar un pedido.
16.5 Inch Medium Flow Blade (Pieza Nº 140-4860)
This Toro OEM 16.5-inch Mid Flow replacement mower blade is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
16.5 Inch Low Flow Blade (Pieza Nº 140-4861)
This Toro OEM 16.5-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
16.5 Inch Atomic Blade (Pieza Nº 140-4862)
This Toro OEM 16.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
16.5 Inch Recycler Blade (Pieza Nº 140-4863)
This Toro OEM 16.5-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Hi-Flow 16.5 Inch Blade Pack (6) (Pieza Nº 140-4887)
This Toro OEM 16.5-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Mid Flow 16.5 Inch Blade Pack (6) (Pieza Nº 140-4888)
This Toro OEM 16.5-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Low Flow 16.5 Inch Blade Pack (6) (Pieza Nº 140-4889)
This Toro OEM 16.5-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Atomic 16.5 Inch Blade Pack (6) (Pieza Nº 140-4890)
This Toro OEM 16.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Recycler 16.5 Inch Blade Pack (6) (Pieza Nº 140-4891)
This Toro OEM 16.5-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
2 TRANSMISSION FILTER KIT (Pieza Nº 144-3842)
BLADE-16.50 HIGH FLOW (Pieza Nº 147-6250)
6 PACK-BLADE, 16.50 HIGH FLOW (Pieza Nº 147-6254)
KIT-PNEUMATIC CASTER TIRE (Pieza Nº 161-3470)
KIT-SEMI PNEU CASTER TIRE (Pieza Nº 161-3471)
3 Bushell Soft Collection Bag for GrandStand Mowers (Pieza Nº 30104)
3 Bushell Soft Collection Bag for GrandStand Mowers. To best protect your investment and maintain optimal performance of your equipment, count on Toro genuine parts and accessories.
Aceite 10W30 para motores de 4 tiempos - Botella de 32 onzas fluidas (946.4 ml) (Pieza Nº 38280)
The Toro 38280 Premium 4-Cycle Lawn Mower Engine Oil 10W-30 is specially formulated to meet specific 4-cycle engine manufacturer requirements calling for 10W-30. This lawn mower engine oil provides the ultimate protection for all 4-cycle OPE engines. The lawn mower engine oil is developed with Toro engineering to meet the standards for all air-cooled, liquid-cooled and diesel engines. To maximize the performance of your Toro lawn mower, we highly recommend using this Toro lawn mower engine oil, which has been specifically formulated for best results. The lawn mower engine oil provides extreme performance in all temperatures, enhancing the life of your lawn mower's engine.
SAE 30 4-Cycle Lawn Mower Engine Oil 32 oz (Pieza Nº 38903)
Toro SAE 30 4-cycle engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines before you filled your lawn mower. This oil meets or exceeds performance requirements of all OEM engines (Toro, Briggs & Stratton, KOLHER, Honda, and Tecumseh). The use of Toro SAE 30 4-cycle lawn mower oil minimizes molecular shearing for extended life in hot-air-cooled applications vs multi-grades (i.e., 10W-30).
G-STD TWIN BAGGER KIT (Pieza Nº 78524)
GrandStand E-Z Vac Blower & Drive Kit for 48 in. Deck (Pieza Nº 78525)
The patent-pending side-mounted Soft Twin Bagger has a large 10 cu. ft. (8 bushel) (0.28 m3) capacity and the vertically-mounted blower allows for excellent maneuverability in tight spaces and maximum visibility.
Easily Removeable: Bagger frame conveniently removes with three pins and one bolt, while bagger removes simply with one pin and latch.
Compact: The side-mounted bagger offers a smaller width dimension
Side-Mounted: Only stand-on machine with a side bagger to provide maximum visibility and excellent maneuverability
Belt-Driven: The blower/bagger system engages automatically with no additional engine required.
Easily Removeable: Bagger frame conveniently removes with three pins and one bolt, while bagger removes simply with one pin and latch.
Compact: The side-mounted bagger offers a smaller width dimension
Side-Mounted: Only stand-on machine with a side bagger to provide maximum visibility and excellent maneuverability
Belt-Driven: The blower/bagger system engages automatically with no additional engine required.
SPARK PLUG (Pieza Nº 92-2153)
Spark Arrestor (Pieza Nº 98-9099)
Toro OEM spark arrestor prevents carbon build ups from being ejected from the engine and igniting a fire. Verify your model and serial number to confirm compatibility before ordering.
-
Nº Modelo
72504 -
Nº Serie
418000000 - 419999999 -
Nombre del producto
GrandStand® 48" (122 cm), 22 cv (16.4 kW), 726 cc -
Marca del producto
Toro -
Tipo de producto
Riding Products -
Serie del producto
Professional Grade Stand-on Mowers -
Tipo de chasis
Stand On -
Anchura
48 inch / 122 cm -
Descarga
Side -
Fabricante del motor
Kawasaki -
Potencia del motor
22 hp -
Tipo de motor
4 Cycle -
Sistema de arranque del motor
Electric -
Tipo de transmisión
Hydrostatic -
Sistema de tracción
Rear WD
-
Engine: Battery
12V 300CCA -
Engine: Engine Speed
3600±100 RPM -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Engine: Ignition Coil Air Gap
.008-.016" / .2-.4mm -
Engine: Engine Oil Type
67 oz. (2.1 Liter) SAE 10W-30 or 10W-40 -
Drive System: Ground Speed
0-10 mph / 0-16kph -
Chassis: Height of Cut Range
1.5" - 5.5" (38-140mm) -
Chassis: Tire Pressure
12-14psi (83-97kPa) -
Drive System: Gearbox Lubricant
HYPR-OIL 500 4.7 L (159 fl. oz.)