Série 4000 de 132 cm (52 po), 19 kW (25,5 cv), 852 cm³
Informations produit
- Numéro de modèle : 74050
- Numéro de série : 411424077 - 412999999
- Type de produit : Riding Products
Chargement...
Schémas d'assemblage
Rechercher une pièce dans des schémas d'assemblage :
-
Manuel d'entretien
-
Manuel de l'utilisateur
-
Catalogue de pièces
-
Garantie produit
-
Instructions d'installation
Hypr-Oil™ 500 (quart) (Réf. 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon) (Réf. 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
HYPR-OIL 500-5 GALLON (Réf. 114-4715)
Jack Kit With Adapter, Zero-Turn-Radius Side-Discharge or Rear-Dischar (Réf. 126-7282)
Jack Kit Adapter, Zero-Turn-Radius Side-Discharge or Rear-Discharge Ri (Réf. 126-7283)
Striper Kit (Réf. 126-7882)
Riding Mower Jack Kit (Réf. 127-6666)
Ce kit de cric pour tondeuse autoportée d’origine Toro® est conçu pour soulever et soutenir en toute sécurité votre tondeuse autoportée ou à rayon de braquage nul Toro. Vous avez ainsi un accès stable et sécurisé au dessous du tablier, pour changer les lames, remplacer les courroies et effectuer l’entretien courant. C'est l'un des accessoires les plus pratiques à l'achat pour tout nouveau propriétaire de tondeuse : investir dès le départ dans un cric approprié évite les méthodes de levage improvisées qui comportent des risques de blessure et d'endommagement du matériel. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine.
52 Inch Recycler Kit (Réf. 139-6653)
Lorsqu'il est installé sur des tondeuses à rayon de braquage nul Toro® compatibles avec tablier de 107 cm (42 po), le kit Recycler® offre la capacité de déchiqueter l'herbe en la recoupant à multiples reprises pour en faire de fines particules. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine pour confirmer la compatibilité.
18 Inch Hi-Flow Blade (Réf. 140-1242)
This Toro OEM 18-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
18 Inch Medium Flow Mower Blade (Réf. 140-4856)
Toro 18 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
18 Inch Low Flow Mower Blade (Réf. 140-4857)
This Toro OEM 18-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
18 Inch Atomic Blade (Réf. 140-4858)
This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
18 Inch Recycler Blade (Réf. 140-4859)
This Toro OEM 18-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Hi-Flow 18 Inch Blade Pack (6) (Réf. 140-4882)
This Toro OEM 18-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Mid Flow 18 Inch Blade Pack (6) (Réf. 140-4883)
This Toro OEM 18-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Low Flow 18 Inch Blade Pack (6) (Réf. 140-4884)
This Toro OEM 18-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Atomic 18 Inch Blade Pack (6) (Réf. 140-4885)
This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
Recycler 18 Inch Blade Pack (6) (Réf. 140-4886)
Vendue par lots de 6, cette lame de rechange Toro® OEM de 47,6 cm (18 po) pour tondeuse Recycler® est conçue pour fonctionner avec le système de déchiquetage Recycler de Toro. Elle est dotée d'ailettes de forme unique, appelées « accélérateurs », qui agissent comme un ventilateur pour maintenir les résidus de tonte en circulation sous le tablier de coupe. Lorsque les brins d’herbe sont renvoyés dans la zone de coupe, ils sont recoupés plusieurs fois en fines particules qui retombent sur la pelouse et se décomposent en engrais naturel, nourrissant ainsi le gazon et réduisant le besoin de ramasser ou de ratisser les déchets de tonte. Compatible avec plusieurs modèles de tondeuses autoportées Toro® – veuillez vérifier les numéros de modèle et de série de votre machine avant de passer commande.
4000 Series Electric Deck Lift Kit (Réf. 144-0390)
This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.
TRIMMER MOUNT (Réf. 144-2665)
KIT, JACK MOUNT (Réf. 144-2676)
HARDTOP SUN CANOPY (Réf. 144-3719)
52" CHUTE GATE KIT [4000] (Réf. 144-6571)
Semi Pneumatic Assembly 15 x 6.50-6 (Réf. 145-1919)
This genuine Toro OEM 15 x 6.50-6 semi-pneumatic wheel assembly is a direct replacement for compatible Toro riding mowers and zero turn mowers. Semi-pneumatic wheels have a foam-filled or solid tire that provides ride quality similar to a pneumatic tire without the risk of puncture or pressure maintenance. Replace when the existing wheel is cracked, warped, or showing structural damage. Verify your model and serial number before ordering.
Handle Extension Kit (Réf. 145-3615)
Genuine OEM Part
Spark Arrestor Screen (Réf. 75-6880)
4000 Series E-Z Vac Blower & Drive Kit for 52" Deck (Réf. 78465)
4000 Series E-Z Vac Blower & Drive Kit for 52" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)
-
Numéro de modèle
74050 -
Numéro de série
411424077 - 412999999 -
Nom du produit
Série 4000 de 132 cm (52 po), 19 kW (25,5 cv), 852 cm³ -
Marque du produit
Toro -
Type de produit
Riding Products -
Série de produit
Zero Radius Turn, Commercial 4000 Series -
Type de Châssis
ZRT - LCE -
Largeur de travail
52 inch / 132 cm -
Éjection
Side Discharge -
Fabricant du moteur
Kawasaki -
Taille de moteur
25.5 hp -
Type de moteur
4 Cycle -
Démarreur
Electric -
Type de transmission
Hydrostatic -
Type de Traction
Rear WD
-
Engine: Battery
12V 300CCA -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Chassis: Tire Pressure
13 psi / 90 kPa -
Engine: Engine Oil Type
filter chg 77 oz.(2.3 L); no filter chg 70 oz.(2.1 L); 10W-30 above -4F(-20C) or 5W-20 below 32F(0C) -
Drive System: Ground Speed
0-10 mph / 0-16kph -
Chassis: Height of Cut Range
1.5" - 5.5" (38-140mm) -
Engine: Engine Speed
3750+/-50 RPM -
Drive System: Gearbox Lubricant
HYPR-OIL 500