Série 4000 de 132 cm (52 po), 19 kW (25,5 cv), 852 cm³
Informations produit
- Numéro de modèle : 74050
- Numéro de série : 418029916 - 419999999
- Type de produit : Riding Products
Chargement...
Schémas d'assemblage
Rechercher une pièce dans des schémas d'assemblage :
-
Manuel de l'utilisateur
-
Catalogue de pièces
-
Garantie produit
-
Instructions d'installation
Hypr-Oil™ 500 (quart) (Réf. 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon) (Réf. 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
HYPR-OIL 500-5 GALLON (Réf. 114-4715)
Jack Kit With Adapter, Zero-Turn-Radius Side-Discharge or Rear-Dischar (Réf. 126-7282)
Jack Kit Adapter, Zero-Turn-Radius Side-Discharge or Rear-Discharge Ri (Réf. 126-7283)
Striper Kit (Réf. 126-7882)
Riding Mower Jack Kit (Réf. 127-6666)
Ce kit de cric pour tondeuse autoportée d’origine Toro® est conçu pour soulever et soutenir en toute sécurité votre tondeuse autoportée ou à rayon de braquage nul Toro. Vous avez ainsi un accès stable et sécurisé au dessous du tablier, pour changer les lames, remplacer les courroies et effectuer l’entretien courant. C'est l'un des accessoires les plus pratiques à l'achat pour tout nouveau propriétaire de tondeuse : investir dès le départ dans un cric approprié évite les méthodes de levage improvisées qui comportent des risques de blessure et d'endommagement du matériel. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine.
52 Inch Recycler Kit (Réf. 139-6653)
Lorsqu'il est installé sur des tondeuses à rayon de braquage nul Toro® compatibles avec tablier de 107 cm (42 po), le kit Recycler® offre la capacité de déchiqueter l'herbe en la recoupant à multiples reprises pour en faire de fines particules. Avant de passer commande, vérifiez les numéros de modèle et de série de votre machine pour confirmer la compatibilité.
18 Inch Hi-Flow Blade (Réf. 140-1242)
Toro OEM Hi-Flow blade. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
18 Inch Medium Flow Mower Blade (Réf. 140-4856)
Toro 18 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
18 Inch Low Flow Mower Blade (Réf. 140-4857)
Toro 18 Inch OEM Low Flow blade. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
18 Inch Atomic Blade (Réf. 140-4858)
Toro 18 Inch OEM Atomic blade. The Toro Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
18 Inch Recycler Blade (Réf. 140-4859)
Toro18 Inch OEM Recycler blade. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Hi-Flow 18 Inch Blade Pack (6) (Réf. 140-4882)
Toro 18 Inch OEM Hi-Flow blade pack. (6) Hi-Flow blades. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Mid Flow 18 Inch Blade Pack (6) (Réf. 140-4883)
Toro 18 Inch OEM Medium Flow blade pack. (6) Medium Flow blades. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Low Flow 18 Inch Blade Pack (6) (Réf. 140-4884)
Toro 18 Inch OEM Low Flow blade pack. (6) Low Flow blades. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Atomic 18 Inch Blade Pack (6) (Réf. 140-4885)
Toro OEM Atomic blade pack. (6) 18 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Recycler 18 Inch Blade Pack (6) (Réf. 140-4886)
This Toro OEM 18-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
TRIMMER MOUNT (Réf. 144-2665)
KIT, JACK MOUNT (Réf. 144-2676)
HARDTOP SUN CANOPY (Réf. 144-3719)
52" CHUTE GATE KIT [4000] (Réf. 144-6571)
Semi Pneumatic Assembly 15 x 6.50-6 (Réf. 145-1919)
Genuine OEM Part
Handle Extension Kit (Réf. 145-3615)
Genuine OEM Part
Pneus radiaux sans air pour gazon MICHELIN® X® TWEEL® (46 cm/26 po) (Réf. 147-4600)
Les pneus radiaux sans air pour gazon MICHELIN® X® TWEEL® sont la prochaine « révolution » dans le monde de la tonte commerciale. Le pneu radial sans air pour gazon MICHELIN X TWEEL a toutes les qualités que vous recherchez dans un pneumatique, mais sans jamais avoir besoin d’air. Fini les crevaisons, les temps d’arrêt, les kits de rustine ou les pneus de rechange. Et en matière d’usure, ce « pneu » affiche une durée de vie trois fois plus longue que celle d’un pneumatique.
BLADE-18.00 HIGH FLOW (Réf. 147-6251)
6 PACK-BLADE, 18.00 HIGH FLOW (Réf. 147-6255)
MICHELIN® X® TWEEL® Turf Airless Caster Wheels (15") (Réf. 147-6337)
The MICHELIN® X® TWEEL® Turf Caster Wheel is the next “revolution” in commercial mowing. The MICHELIN X TWEEL Turf Caster Wheel has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.
Bucket Mount Kit, Z Master 2000 or 4000 Series Riding Mower (Réf. 147-6345)
Universal Mount Kit, Z Master 2000 or 4000 Series Riding Mower (Réf. 147-6346)
KIT-BAFFLE, TURBO FORCE (Réf. 147-7361)
KIT-ELEC DECK LIFT (Réf. 147-7867)
KIT-2IN RECIEVER HITCH (Réf. 161-2810)
KIT-ACTUATOR REPLACEMENT,412200557 BE (Réf. 161-3549)
KIT-ELEC DECK LIFT, SN 412200557 BELO (Réf. 161-3550)
Fuel Pickup with Screen, Kit (Réf. 161-6806)
Spark Arrestor Screen (Réf. 75-6880)
BAGGER KIT, Z MASTER 2000 / 4000 (Réf. 78439)
4000 Series E-Z Vac Blower & Drive Kit for 52" Deck (Réf. 78465)
4000 Series E-Z Vac Blower & Drive Kit for 52" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)
-
Numéro de modèle
74050 -
Numéro de série
418029916 - 419999999 -
Nom du produit
Série 4000 de 132 cm (52 po), 19 kW (25,5 cv), 852 cm³ -
Marque du produit
Toro -
Type de produit
Riding Products -
Type de Châssis
ZRT - LCE -
Largeur de travail
52 inch / 132 cm -
Éjection
Side Discharge -
Fabricant du moteur
Kawasaki -
Taille de moteur
25.5 hp -
Type de moteur
4 Cycle -
Démarreur
Electric -
Type de transmission
Hydrostatic -
Type de Traction
Rear WD