Air Filter

Dry, replaceable primary and safety elements.

Armrests

Standard

Battery

12V

Blade Style/Type

Rotary

Blade Type (Description)

68.6 cm long, 6.4 cm wide, 0.64 cm thick combination blades.

Cab Unit

N/A

Controls

Ignition switch, low and auto mow/transport range selection switch, PTO switch, light switch. Foot-operated traction pedal, individual foot-operated steering brake control of left and right wheels with parking brake lock. One 2-position lift switch.

Cooling System Description

31.3 litre capacity with 10 micron remote spin-on filter, 9 row single pass cooler with tilt out for cleaning. Variable speed hydraulic fan drive with automatic (based on coolant and oil temps) and auto/manual reversing capabilities. Rear-mount, single pass, 7-row radiator with 6.3 fins per inch, 12.3 litres capacity.

Cruise Control

Standard off/on plus engage switch. Increase/decrease speed through InfoCenter, once engaged.

Cup Holder

Standard

Cutting Unit Accessories

Atomic Mulching Blades, High Sail/Angle Sail Blades, Rear Roller Scraper Kit, Mulching Kit, Deck Lock Kit, 56 cm Rotary Replacement Cutting Unit

Cutting Unit Lift/Lower

Three 2-position switches for deck raise/lower.

Cutting Unit Type/Configuration

Seven Contour™ Plus 68.6 cm, rear-discharge rotary cutting units with standard full-length striping rear rollers. Operate-on-the-fly mowing configurations of 5, 6, or 7 decks utilizing the independently-operable outboard cutting units, resulting in cutting widths of 276.8 cm, 328.9 cm, or 381 cm, overlap 16.5 cm, overhang 78.4 cm

Deck Construction

10-gauge steel constructed chambers with 12-gauge welded reinforcements. 3.8 cm square x 6.35 mm wall tube with 7-gauge side supports. Spindle support 0.48 cm high-strength steel and 10-gauge exterior channels.

Deck Wing Protection

Impact absorption device on each wing deck.

Drivetrain

Diesel

Electrical System

12-volt, 650 CCA battery, 40 amp alternator. Overload protection with automotive type fuses.

Engine Cooling

Liquid Cooled

Fuel Capacity

83.3 litres

Fuel Type

Diesel / Biodiesel

Gauges/Instrumentation

InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temperature, intake temperature, low oil pressure, alternator, engine hours, engine rpm, hydraulic oil temperature, voltage and fuel usage.

Ground Clearance

15.3 cm

Ground Following

15.3 cm anti-scalp cups on each blade.

Ground Speed - Forward

0 - 13 mph

Ground Speed - Reverse

0 - 8 mph

Height

with 2-post ROPS: 216 cm (88.8") upright, 165 cm (65.2") folded

Height of Cut Range

1.9 cm - 10.2 cm in 6.4 mm increments. 3-position 0.762 mm incremental calibration.

Hydraulic Cylinders

10 micron remote spin-on filter, single pass cooler, 6.3 fins per inch. Variable speed hydraulic fan drive with automatic (based on coolant and oil temps) and auto/manual reversing capabilities.

Hydraulic Fluid Capacity

31.2 litres

Hydraulic Fluid Type

Toro PX™ Extended Life Hydraulic Fluid

Interlocks

Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. Machine automatically switches to low range if decks are lowered. Engine stops if parking brake engaged and traction pedal not in neutral. Prevents switching mow to transport unless stopped to protect turf.

Length

370 cm

Lighting

Standard

Main Frame/Chassis

All welded formed-steel frame with integral tie-down anchors.

Max Slope Angle

Refer to operator’s manual.

Mowing Rate (Productivity)

Up to 10.6 acres/hr (4.3 hectacres/hr)

Mowing Speed

0 - 6.5 mph

Number of Blades

7

Oil Capacity

5.7 litres

Optional Accessories

Heat-only Cab, White Sunshade, Red Sunshade, Operator Fan Kit, 4WD Flow Divider Kit, Two-post ROPS Extension System, Windscreen, 90-amp Alternator Kit, Road Light Kit, Rotating Beacon

Overall Width

391 cm lowered, 224 cm raised

Parking/Service Brakes

Dynamic through hydrostatic transmission, plus mechanically-actuated, internal wet disc brakes on input to each planetary drive. Individual foot-operated steering brake control of left and right front wheel. Lock pedals together and latch to engage parking brake.

Power Steering

Yes

Power Train (Engine Description)

Yanmar® 4-cylinder liquid-cooled, turbo-charged diesel. Power: 41.1 kW (55 hp) gross power at rated speed of 2700 rpm. Torque peak: 169 N·m (125 ft-lbs) @ 2000 rpm. Displacement: 2.1 litres. EPA Tier IV Final and Stage V Compliant.

Rollers

Per deck: Two 12.7 cm (5") diameter front rollers, one 7.6 cm (3") diameter rear roller.

Safety/Operator Safety

2-post foldable ROPS and seat belt standard.

Seat

Premium seat with adjustments for operator weight via air ride suspension, seat fore/aft position, seat back angle, arm rest height and retractable seat belt.

Spindle Assembly

Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft. Splined connection between spindle shaft and deck motor. Welded blade retainer plus anti-scalp cups.

Starting

Key Start

Steering System Description

Power steering with dedicated power source, tilt steering.

Tires - Rear

20 x 10.00-10, 4-ply, Turf Tread

Tool Box

Standard

Traction Drive

4WD

Traction Drive

Parallel hydrostatic, closed loop system with full-time 4WD forward/reverse in low (mow) and high (transport) range with optional full-time, momentary traction flow divider (forward only) (Model 31527). Variable displacement piston pump with electronic servo control powers dual speed piston motor drive into double reduction planetary in front, and mechanical axle in rear. Smart Power® feature controls traction speed to maintain optimal cutting blade speed.

Transport Width

Track Width (front): 224 cm (88.3") Track Width (rear): 141cm

Tyres - Front

29 x 14.00-15, 6-ply

Weight

2288 kg with full fluids.

Wheelbase

172 cm

Width of Cut

150" (381 cm)