5000 Series Rear Discharge 72 in. (183 cm) 26.5 hp EFI 747cc
Product Information
- Model #: 72922
- Serial #: 421000000 - 999999999
- Product Type: Riding Products
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Operator's Manual
-
Parts Catalog
-
Product Warranty
-
Setup Instructions
-
Software Guide
Hitch Kit (Part # 109-9487)
Hypr-Oil™ 500 (quart) (Part # 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon) (Part # 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
HYPR-OIL 500-5 GALLON (Part # 114-4715)
BIMINI FOLDING SHADE ASM (Part # 115-4510)
KIT,FRPS LIGHT (Part # 116-1154)
Seat Cover w/Arm Rest (Part # 117-0095)
This genuine Toro OEM seat cover with arm rest is designed to fit Toro Z-Master zero turn mowers and serves a dual purpose: protecting the operator seat from UV and wear from day one, or replacing a worn or damaged seat cover as a wear-and-tear item. The arm rest addition improves operator comfort significantly during longer mowing sessions. Verify your model and serial number before ordering.
Suspension Seat and Mount Kit (Part # 121-7596)
Toro suspension seat increases operator comfort and boosts productivity in ways you’ve never imagined. Mow longer without stopping and cut around even the most intricate landscaping at faster speeds with better results. This Toro OEM replacement seat is designed to restore operator comfort on your Toro riding mower. Verify your model and serial number to confirm compatibility before ordering.
SKID-BUMPER, DECK (Part # 126-0854)
KIT-ROPS LOCK TORO (Part # 126-4064)
Jack Kit With Adapter, Zero-Turn-Radius Side-Discharge or Rear-Dischar (Part # 126-7282)
Jack Kit Adapter, Zero-Turn-Radius Side-Discharge or Rear-Discharge Ri (Part # 126-7283)
Z-Master Anti-scalp & Wear Bar Kit (Part # 127-6650)
This genuine Toro OEM anti-scalp and wear bar kit is designed for Toro Z-Master commercial zero turn mowers. The anti-scalp deck wheels prevent the mower deck from contacting the ground when passing over raised spots and terrain undulations — protecting the blades from impact damage and preventing the lawn from being stripped. The wear bar protects the leading edge of the deck from abrasion damage on hard surfaces and debris. Both are wear items that should be inspected regularly and replaced when cracked, broken, or worn through. Verify your model and serial number before ordering.
Riding Mower Jack Kit (Part # 127-6666)
This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.
Power Deck Lift Kit (Part # 132-5986)
Easily Raise and Lower your Z-Master cutting deck with the push of a button using this Toro power lift kit. Toro operator controlled discharge kit. This Toro OEM discharge chute kit allows the operator to direct or block the flow of clippings from the mower deck, helping to prevent debris from reaching flower beds, driveways, or bystanders. Verify your model and serial number to confirm compatibility before ordering.
Worklight Kit (Part # 135-7320)
Trimmer Mount Kit (Part # 137-9769)
Toro OEM trimmer mount kit. Keep your trimmer securely mounted on your riding mower. Verify your model and serial number to confirm compatibility before ordering.
24.50 Inch Atomic Blade (Part # 140-1239)
This Toro OEM 24.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Atomic 24.5 Inch Blade Pack (6) (Part # 140-4875)
This Toro OEM 24.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Riding Mower Toeboard Weights (Part # 140-4958)
This genuine Toro OEM toeboard weight kit adds front ballast to your Toro riding mower, improving traction and steering stability on slopes and uneven terrain. Insufficient front weight on a riding mower can cause the steering wheels to lose traction on steep ground, reducing control and increasing the risk of sliding. Adding toeboard weights is a practical upgrade for any owner who regularly mows on slopes. Verify your model and serial number before ordering.
Slope Sensor-Lazer/Z-Master 3000/5000/6000 (Part # 142-4910)
SCREEN-SPARK ARRESTOR (Part # 142-7683)
Z-Master 72 Inch Deck Baffle Kit (Part # 144-0380)
This genuine Toro OEM 72-inch deck baffle kit is designed for Toro Z-Master commercial zero turn mowers. Deck baffles control airflow under the cutting deck, directing clippings toward the discharge opening and improving the quality and consistency of cut. Installing or replacing baffles is recommended when cutting quality has deteriorated in heavy or dense grass, or when baffles have been damaged by debris impact. Verify your model and serial number before ordering.
Jack Mount Kit (Part # 146-0696)
MICHELIN® X® TWEEL® Turf Airless Caster Wheels (13") (Part # 147-6295)
The MICHELIN® X® TWEEL® Turf Caster Wheel is the next “revolution” in commercial mowing. The MICHELIN X TWEEL Turf Caster Wheel has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.
BLADE-24.50 CR LOW FLOW (Part # 163-7364)
TORO RIDER OVER SEAT BAG (Part # 490-7317)
Titan Deluxe Cover (Part # 490-7319)
Toro OEM deluxe rider cover keeps your Titan riding lawn mower protected from the elements when not in use. Cover is made to withstand wear and tear and features elastic cord to keep cover in place. This Toro OEM mower cover is made from durable, weather-resistant material to protect your equipment from rain, sun, dust, and debris during storage. Verify your model and serial number to confirm the correct cover for your equipment.
Rider Arm Rest Bag (Part # 490-7320)
This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.
Filter Gauge for Kohler Engines (Part # 99-4664)
Toro genuine filter gauge. Toro would like to remind you that fitment can vary by sub model, serial number, and/or production date of your equipment. Verify your model and serial number to confirm compatibility before ordering.
KIT, TRASH HOLDER (Part # TC26)
-
Model #
72922 -
Serial #
421000000 - 999999999 -
Product Name
5000 Series Rear Discharge 72 in. (183 cm) 26.5 hp EFI 747cc -
Product Brand
Toro -
Product Type
Riding Products -
Chassis Type
ZRT - LCE -
Swath
72in/183cm -
Discharge
Rear Discharge -
Engine/Motor Manufacturer
Kohler -
Engine/Motor Size
747cc -
Engine/Motor Type
4 Cycle -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
Rear WD