| Ver todos los elementos en Greensmaster® TriFlex™ Series |
Los cortacéspedes Greensmaster® TriFlex™ fueron diseñados para elevar la siega de precisión a nuevas cotas en los cortacéspedes para greens. Con la contrastada suspensión Flex, las unidades de corte flotan libremente sobre las ondulaciones del green, proporcionando una mayor calidad de corte y un aspecto superior. La mayor facilidad de mantenimiento es otra gran ventaja de los nuevos modelos TriFlex™. Las unidades de corte se cambian rápidamente sin herramientas, por lo que su mantenimiento resulta aun más fácil y rápido, y el reposapiés abatible ofrece un fácil acceso a la unidad de corte central.
| Accesorios opcionales | Off-Greens Kit (Anti-Bobbing), Tri-Roller Kit, Spiker Kit, 3WD Kit, Leak Detector, Light Kit, Seat Kit (Standard or Premium), Armrest Kit (Standard or Premium), Hydraulic Oil Cooler Kit (Gas or Diesel), 2WD ANSI-compliant Weight Kit (Gas or Diesel), 3WD ANSI-compliant Weight Kit (Gas), Spark Arrestor Kit (Gas or Diesel), Canopy, Utility Bag Kit, Seat Cover, LH Armrest, Wireless Hour Meter |
|---|---|
| Accesorios para unidades de corte | 8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. |
| Ajuste de la contracuchilla | Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.0007" (0.018 mm) bedknife movement for each position. |
| Altura | 80.83" (205 cm) |
| Altura de Corte | Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed. |
| Anchura de corte | 59" (150 cm) |
| Anchura para el transporte | Outside at Tires: 61" (154.94 cm) Outside at Reels: 70.62" (179 cm) |
| Anchura Total | 70.62" (179 cm) with reels |
| Arranque | Arranque con llave |
| Batería | 12 V |
| Capacidad de combustible | 4.75 U.S. gal. (17.9 L) |
| Capacidad de fluido hidráulico | 6.8 U.S. gal. (25.7 L) |
| Contracuchilla | Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. |
| Controles | Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke (AC only): Opens / Closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. Diagnostic Light: Indicates system faults to assist in resolving issues. |
| Descripción del sistema de dirección | No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking. |
| Detección de fugas | Standard Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid. |
| Diámetro del molinete | 12.7cm (5") |
| Dirección asistida | Sí |
| Distancia entre ejes | 47" (119 cm) |
| Distribución del césped | Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
| Estilo/tipo de cuchilla | Reel |
| Frecuencia de corte/autoafilado | Adjustable up to 2050 RPM at 2850 engine RPM. Backlapping standard. |
| Frenos de servicio/estacionamiento | Hand-actuated parking brake lever with two 6" (15.2 cm) diameter drum brakes mounted on the front wheel motors. |
| Indicadores/Instrumentación | Hour meter, low oil pressure warning light. |
| Longitud | 98" (249 cm) |
| Neumáticos delanteros | 19" x 10.50"-8", 4 lonas, dibujo liso |
| Neumáticos traseros | 19" x 10.50"-8", 4 lonas, dibujo liso |
| Número de cuchillas | 11, 14, 8 |
| Peso | 1,161 lbs. (526 kg) |
| Refrigeración del motor | Refrigerado por aire |
| Rodillos | Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft. |
| Seguridad del operador | Sound level of 80 dB(A) at operator’s ear under normal conditions. |
| Separación del suelo | 4.5" (11.4 cm) |
| Sistema Eléctrico | 12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F/25 amps draw. 50 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation. |
| Tipo de combustible | Gasolina |
| Tipo de cuchilla (descripción) | Reels are 5" (13 cm) in diameter, 21" (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375" (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
| Tipo/configuración de la unidad de corte | Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
| Transmisión de los implementos | Single gear pump, valve block, series reel drive to 3 reel motors. |
| Transmisión de tracción | 2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
| Transmisión de tracción | 2WD |
| Transmisión del molinete/cilindro | Hidráulico |
| Tren de transmisión | Gasolina |
| Tren de transmisión (Descripción del motor) | Briggs & Stratton® Vanguard®, 23 HP (17.2 kW) @ 3600 rpm, 2-cylinder, air-cooled, gasoline engine, governed to 2920 high idle, 1650 rpm low idle. Displacement: 38.3 cu-in. (627 cc) |
| Velocidad de avance hacia adelante | 0-16.1 km/h (0-10 mph) |
| Velocidad de siega | 0 - 5 mph (0 - 8 km/h) |
| Título | Documentos |
|---|
Seleccione el año de su modelo entre las opciones siguientes para ver piezas y manuales.
**Para más detalles sobre la garantía, póngase en contacto con su concesionario.