7500-D Series 96 in. (244 cm) 37 hp 1642cc Diesel Rear Discharge
Product Information
- Model #: 72098
- Serial #: 400000000 - 411399999
- Product Type: Riding Products
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Service Manual
-
Operator's Manual
-
Parts Catalog
-
Product Warranty
-
Setup Instructions
-
Software Guide
-
ACMA Declaration of Conformity
Toro 55 Gallon Premium Transmission/Hydraulic Fluid (Part # 108-1183)
Toro 55 Gallon Premium Transmission/Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.
Please contact your local dealer
Toro 5 Gallon Premium Transmission/Hydraulic Fluid (Part # 108-1184)
Toro 5 Gallon Premium Transmission/Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.
Riding Mower Jack Kit (Part # 127-6666)
This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.
Please contact your local dealer
Toro Full Synthetic 10W-30 Engine Oil (32 oz.) (Part # 138-6053)
Toro full synthetic 10W-30 engine oil. The easy engine oil choice for any outdoor power equipment
to increase performance and reliability.
Toro Full Synthetic 10W-30 Engine Oil (Part # 138-6054)
Toro full synthetic 10W-30 engine oil. The easy engine oil choice for any outdoor power equipment
to increase performance and reliability.
24.5 Inch Mulching Blade (Part # 140-1238)
This Toro OEM 24.5-inch mulching replacement blade features more pronounced curves and a longer cutting edge compared to standard discharge blades, enabling it to cut grass and immediately redirect clippings back into the deck for additional passes. The result is finely shredded clippings that settle into the lawn quickly and decompose into nutrients, reducing the need to bag or dispose of grass waste. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Atomic Blade (Part # 140-1239)
This Toro OEM 24.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Medium Flow Blade (Part # 140-4850)
This Toro OEM 24.5-inch Mid Flow replacement mower blade is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Low Flow Blade (Part # 140-4851)
This Toro OEM 24.5-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Recycler Blade (Part # 140-4852)
This Toro OEM 24.5-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Hi-Flow Blade Pack (6) (Part # 140-4872)
This Toro OEM 6-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro walk-behind mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Mid Flow 24.5 Inch Blade Pack (6) (Part # 140-4873)
This Toro OEM 24.5-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Low Flow 24.5 Inch Blade Pack (6) (Part # 140-4874)
This Toro OEM 24.5-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Atomic 24.5 Inch Blade Pack (6) (Part # 140-4875)
This Toro OEM 24.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Recycler 24.5 Inch Blade Pack (6) (Part # 140-4876)
This Toro OEM 24.5-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
-
Model #
72098 -
Serial #
400000000 - 411399999 -
Product Name
7500-D Series 96 in. (244 cm) 37 hp 1642cc Diesel Rear Discharge -
Product Brand
Toro -
Product Type
Riding Products -
Product Series
Zero Radius Turn, Professional 7500-D Series -
Chassis Type
ZRT - LCE -
Swath
96 inch / 244 cm -
Discharge
Rear Discharge -
Engine/Motor Manufacturer
YANMAR -
Engine/Motor Size
37 hp -
Engine/Motor Type
4 Cycle Diesel Tier 4 -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
Rear WD
-
Chassis: Height of Cut Range
1" - 5.5" (25-140mm) -
Engine: Battery
12V 540 CCA -
Engine: Engine Speed
3000+/-50 RPM -
Drive System: Gearbox Lubricant
Mobil 1 75w-90 -
Engine: Engine Oil Type
7 U.S. Qt (6.6 L) CJ-4 or Higher 15W40 -
Drive System: Ground Speed
Up to 12.5 MPH -
Chassis: Tire Pressure
Rear 18 psi