7500-D Series 72 in. (183 cm) 25 hp 1267cc Diesel
Product Information
- Model #: 72030
- Serial #: 414918422 - 415299999
- Product Type: Riding Products
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Service Manual
-
Operator's Manual
-
Parts Catalog
-
Product Warranty
-
Setup Instructions
-
Software Guide
-
ACMA Declaration of Conformity
GrandStand Turbo Baffle Kit (Part # 107-1634)
This genuine Toro OEM turbo baffle kit is designed for Toro GrandStand stand-on mowers and modifies the airflow under the cutting deck to improve clipping discharge performance in heavy, dense, or wet grass conditions. The turbo baffle redirects air movement beneath the deck to increase the velocity at which clippings are expelled through the discharge chute, reducing the tendency for clippings to clump or block in challenging mowing conditions. Verify your model and serial number before ordering.
Toro 55 Gallon Premium Transmission/Hydraulic Fluid (Part # 108-1183)
Toro 55 Gallon Premium Transmission/Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.
Please contact your local dealer
Toro 5 Gallon Premium Transmission/Hydraulic Fluid (Part # 108-1184)
Toro 5 Gallon Premium Transmission/Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.
Riding Mower Jack Kit (Part # 127-6666)
This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.
Please contact your local dealer
SAE 15W40 engine oil 32 oz (Part # 137-1051)
Toro 15W40 engine oil is proven to extend
the life of your mower. All-in-one walk power mower engine oil.
Toro Full Synthetic 10W-30 Engine Oil (32 oz.) (Part # 138-6053)
Toro full synthetic 10W-30 engine oil. The easy engine oil choice for any outdoor power equipment
to increase performance and reliability.
Toro Full Synthetic 10W-30 Engine Oil (Part # 138-6054)
Toro full synthetic 10W-30 engine oil. The easy engine oil choice for any outdoor power equipment
to increase performance and reliability.
72 Inch Recycler Kit (Part # 139-6659)
Recycler Kit, when installed on compatible 42 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. Verify your model and serial number to confirm compatibility before ordering.
Please contact your local dealer
24.5 Inch Mulching Blade (Part # 140-1238)
This Toro OEM 24.5-inch mulching replacement blade features more pronounced curves and a longer cutting edge compared to standard discharge blades, enabling it to cut grass and immediately redirect clippings back into the deck for additional passes. The result is finely shredded clippings that settle into the lawn quickly and decompose into nutrients, reducing the need to bag or dispose of grass waste. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Atomic Blade (Part # 140-1239)
This Toro OEM 24.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Medium Flow Blade (Part # 140-4850)
This Toro OEM 24.5-inch Mid Flow replacement mower blade is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Low Flow Blade (Part # 140-4851)
This Toro OEM 24.5-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
24.50 Inch Recycler Blade (Part # 140-4852)
This Toro OEM 24.5-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Hi-Flow Blade Pack (6) (Part # 140-4872)
This Toro OEM 6-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro walk-behind mowers models — always verify your model and serial number before ordering to confirm the correct fit.
Mid Flow 24.5 Inch Blade Pack (6) (Part # 140-4873)
This Toro OEM 24.5-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Low Flow 24.5 Inch Blade Pack (6) (Part # 140-4874)
This Toro OEM 24.5-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Atomic 24.5 Inch Blade Pack (6) (Part # 140-4875)
This Toro OEM 24.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
Recycler 24.5 Inch Blade Pack (6) (Part # 140-4876)
This Toro OEM 24.5-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro commercial zero turn mowers models — verify your model and serial number before ordering.
-
Model #
72030 -
Serial #
414918422 - 415299999 -
Product Name
7500-D Series 72 in. (183 cm) 25 hp 1267cc Diesel -
Product Brand
Toro -
Product Type
Riding Products -
Product Series
Zero Radius Turn, Professional 7500-D Series -
Chassis Type
ZRT - LCE -
Swath
72 inch / 183 cm -
Discharge
Side Discharge -
Engine/Motor Manufacturer
YANMAR -
Engine/Motor Size
25 hp -
Engine/Motor Type
4 Cycle Diesel Tier 4 -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
Rear WD
-
Engine: Engine Speed
2600±100 RPM -
Chassis: Height of Cut Range
1" - 5.5" (25-140mm) -
Engine: Battery
12V 540 CCA -
Drive System: Gearbox Lubricant
Mobil 1 75w-90 -
Drive System: Ground Speed
Up to 12.5 MPH -
Chassis: Tire Pressure
Rear 18 psi -
Engine: Engine Oil Type
5 U.S. Qt (4.7L) CJ-4 or higher 15W-40