• Uses 1/3 less flow to reach a radius of a conventional spray nozzle
  • The H²O Chip generates a larger, more uniform droplet size resulting in consistency across the irrigated arc
  • Male & female threaded models available
  • Available in Pressure Compensating Device (PCD) versions

Toro’s new Precision® Series Spray Nozzles are the most complete and efficient spray nozzle line available to help irrigation professionals manage water use, eliminate runoff and reduce customer water bills.

Refer to the Video Tab to learn more about the Precision Series Spray Nozzle

Savings calculator (HTML) Click here
Savings calculator (Mac and Excel 2007) Click here
Savings calculator (Excel 2003) Click here

View Larger
Patented H²0 Chip Technology

Using patented H²0 chip technology – and no moving parts – each Precision Series Spray nozzles creates one or more high frequency oscillating streams to achieve the desired arc and radius with 1/3 less water usage.

View Larger
Maximize Irrigation Efficiency

Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate, which better matches soil infiltration rate. This lower precipitation rate, along with high distribution uniformity make this nozzles family the most efficient nozzle from 5’-15’ (1,5-4,6m).

View Larger
Design and Retrofit Effectiveness

The lower flow rate of Precision Series spray nozzles maximizes design efficiency and saves on overall material costs by using fewer valves and less controller stations. In addition, existing systems with low pressure can be fixed with a simple retrofit of the existing high- flow nozzle.

View Larger
Third-Party Performance Validation

Precision Series Spray nozzles have been tested and validated in the field and at the Center for Irrigation Technology (CIT).

View Larger
Optional Pressure Compensating Device (PCD)

Maintains optimal performance even when inlet pressure rises to 40 psi and higher.

  • Radius
    5'-15' (1.5 - 4.6)
  • Flow
    .04-2.4 GPM (.15 - 9.1 LPM)
  • Precipitation Rate
    ≤ 1"/hr (2.5 cm)
  • Recommended Operating Pressure
    Non PCD: 30 PSI (2.0 BAR) With PCD: 40 PSI (4.0 BAR) and above
  • Maximum Operating Pressure
    75 PSI (5.2 BAR)
  • Thread
    Male; Female
  • Pattern
    60, 90, 120, 150, 180, 210, 240, 270, 360 & Specialty