• Patented H2O Chip Technology™ generates larger, more uniform droplets, which results in consistency across the irrigated arc.

  • Uses up to 35% less water to reach the radii of conventional spray nozzles

  • All models are available with Toro (Male) or Female threads

  • All models are available with factory-installed Pressure Compensating Discs (PCD)

Toro’s new Precision® Series Spray Nozzles are the most complete and efficient spray nozzle line available to help irrigation professionals manage water use, eliminate runoff and reduce customer water bills.

To learn more about the Precision Series Spray Nozzle, click here Precision Spray Nozzle Retrofit Water Savings Calculator

PSN calculator click here

Patented H²0 Chip Technology

Using patented H²0 chip technology – and no moving parts – each Precision Series Spray nozzles creates one or more high frequency oscillating streams to achieve the desired arc and radius with 1/3 less water usage.

Maximize Irrigation Efficiency

Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate, which better matches soil infiltration rate. This lower precipitation rate, along with high distribution uniformity make this nozzles family the most efficient nozzle from 5’-15’ (1,5-4,6m).

Design and Retrofit Effectiveness

The lower flow rate of Precision™ Series Spray Nozzles maximizes design efficiency and saves on overall material costs by using fewer valves and less controller stations. In addition, the performance of existing systems with lower pressures can be upgraded with a simple retrofit of the pre-existing high flow nozzles.

Third-Party Performance Validation

Precision Series Spray nozzles have been tested and validated in the field and at the Center for Irrigation Technology (CIT).

Optional Pressure Compensating Device (PCD)

Maintains optimal performance even when inlet pressure rises to 40 psi and higher.

  • Radius
    5'-15' (1.5 m - 4.6 m)
  • Flow
    0.06-2.4 GPM (.2 - 9.6 LPM)
  • Precipitation Rate
    ≤ 1"/hr (25 mm)
  • Recommended Operating Pressure
    Non PCD: 30 PSI (2.0 BAR) With PCD: 40 PSI (4.0 BAR) and above
  • Thread
    Male; Female
  • Pattern
    60, 90, 120, 150, 180, 210, 240, 270, 360 & Specialty