Request A Demo

  • Vanguard® 18 hp (13.4kW) V-Twin Gas Engine
  • Quick Attach System™ (QAS)
  • 17 Attachments Available
  • Front, Mid and Rear Attachment Points

The Sand Pro® 5040 is the definition of versatility and function. The patented Quick Attach System™ (QAS) for front, mid and rear attachments allows for under-a-minute attachment changes. With a powerful 18 hp (13.4 kW) engine and hydraulic power steering, be more productive with 17 attachments, including the Flex Blade which raises and lowers hydraulically. Each attachment was specifically designed to take the operator influence out of the equation for high performance and a consistent surface finish.

View Larger
3WD Series/Parallel™ Traction Drive

The 3WD Series/Parallel™ traction drive improves traction in wet or heavy working conditions to get the job completed quickly. In traditional 3WD units all traction effort is lost as soon as one wheel slips. Series/Parallel™ ensures that you always have tractive effort with at least one wheel to keep your unit from getting stuck and losing precious time.

View Larger
Steerable Front Attachments

Steerable front attachments on the Sand Pro® 5040 give operators the precision never before offered in this industry. The newly designed Flex Blade is adjustable to different environments (wet/dry), scarify, level and smooth in the same pass. Improve the operators ability to direct the attachment into and out of tight areas, like around dugouts or base path contours. Hydraulic float position and steerable blade reduces operator influence and the potential for damage. Combined, these features improve the consistency between fields, operators, and weather conditions.

View Larger
Quick Connect Hydraulics

The new quick connect hydraulics allow anyone to connect or disconnect any of the powered attachments in under a minute. This eliminates the need for dedicated equipment.

View Larger
Power Packed Engines

The trusted Vanguard® engine is fuel efficient, runs cooler and features a fully pressurized oil lubrication system for longer life.

View Larger
Quick Attach System™ (QAS)

With the Quick Attach System™ (QAS), anyone can switch from one attachment to another in less than a minute, with no tools required! Match the machine to the environment to get your fields back into playing condition The QAS allows you to do more with less, and get the job done faster. Rear QAS is standard on the Sand Pro® 3040 and 5040, front QAS™ is optional on the Sand Pro® 5040.

View Larger
Maneuverable Steering

For operator ease of use, and to improve the effectiveness of the steerable front attachments, hydraulic power steering is now available on the 5040 and a rugged gear drive system on the 3040. Both designs are now environmentally sealed to ensure long life and reduced maintenance.

View Larger
Maintenance Friendly Layout

The new unit was designed with the mechanic in mind, to reduce, simplify, and increase access to all scheduled maintenance. The majority of scheduled maintenance projects can be accessed by lifting the operator seat. For increased access, the side and center quarter panels can be taken off by removing just a few bolts.

View Larger
Ease of Use

Easy to use and adapt to the next task. Having the right tool for the job increases the effectiveness of your crew and the efficiency of your operation. Attachments are designed to minimize operator influence to achieve the same result, regardless of whether a new or veteran employee performed the task.

View Larger
Mid-Mount System

With the Mid-mount system, a flex mounted toolbar can be adjusted to flex backwards when it comes in contact with anything from rocks or other rigid objects to prevent gouging or wash boarding. Multiple locking depth settings to ensure consistent depth of scarification from day to day or between operators. A mid-mount leveling system is also available to make quick work of the difficult projects like around dugouts or player positions.

  • Engine
    Vanguard® 18 hp (13.4 kW) V-Twin, 4-Cycle, Gas
  • Fuel Capacity
    5 gal (18.9 L)
  • Ground Speed
    0-10 mph (0 - 16 kph)
  • Height
    45.25" (1.14 m)
  • Length
    67.5" (1.7 m)
  • Traction Drive
    3-wheel drive
  • Weight
    930 lbs. (421.8 kg)
  • Warranty
    2-year limited warranty
  • Width
    58" (1.47 m)
View Larger
Midmount Solid Tine Toolbar

Reversible solid tines designed for aggressive scarifying and harder surfaces (carbide tipped teeth are also available for the harshest conditions).

View Larger
Rear Cocoa Drag Mat

Designed to quickly produce a premium finish on dry bunkers.

View Larger
Midmount Spring Tine Toolbar

Flexible 1/4"x 5" (6 mm x 12.7 cm) tines designed for light scarifying and breaking up top crusts after rains.

View Larger
Rear Segmented Grooming Broom

QAS grooming brooms designed to minimize top surface disruption to maximize firmness for a smooth finished look.

View Larger
Rear Hitch Kit

200 lbs (90.7 kg) gross trailer weight/ hitch load.

View Larger
Rear Debris Blower

QAS high power cyclone blower designed to quickly clear debris from groomed and unwanted areas. Hydraulically powered, 2000 rpm fan speed - 2700 cfm @ 81 mph (76.4 cmm @ 130 kph).

View Larger
Rear Finish Grader

QAS Designed for leveling and/or scarifying large areas like difficult sports field areas. 66 (168cm) width, box plow and scarifier, 1.8 (4.5cm) max working depth, spring load regulation to allow relief if an obstruction is hit. Hardened carbide tips available for scarifier teeth.

View Larger
Rear Drag Mat Carrier System

QAS mounting carrier frame designed to eliminate the need to manually lift drag mats between passes and traveling from field to field. 72 (183cm) width, accepts steel or cocoa drag mats. Hydraulic raise/lower of drag mats.

View Larger
Midmount Scarifier/Leveling Blade

Mid-mount leveling blade attaches to any tine toolbar to quickly level out large areas. Selectable depth engagement from ground level to 1.5 (3.8 cm), 52 (132.1 cm) width, transport height 6.75 (17.1 cm)

View Larger
Midmount Weeder Tine Toolbar

Cultivation style tines for removing weeds and grass from unwanted areas.

View Larger
Rear Spiker

QAS Ground driven design for spiking and increasing air flow on turf. Rear QAS 57.6 (746cm) width, 1.25 (3.1cm) max working depth, 2.4 (6.1cm) blade spacing. Two independently floating units, with 12 spiker blades and 11 hold down fingers.

View Larger
Front Hydraulic Flex Blade

36 (91.4 cm) width steel blade
4 position settings:
Raise, Hold, Lower, and Float
Infield Pro 5040 only.

View Larger
Rear Steel Drag Mat

Designed to quickly groom and finish wet or dry sports fields, while minimizing the displacement of infield mix especially into the outfield.

Front 60" (152.4 cm) Blade Extension

60" (152.4 cm) bolt on expansion blade designed for leveling out larger uneven areas (for manual blade only).

View Larger
Front Lip Broom

The QAS Lip Broom is a front attachment designed to eliminate the task of manually maintaining infield lips. The specially designed bristle broom is driven by the QAS remote hydraulics, and removes ridge buildup by sweeping material back into the infield. The attachment can be hydraulically lifted and lowered, is steerable, and offers adjustability for aggressiveness and speed.

View Larger
Rear Spring Rake

QAS spring leaf rake assembly designed for sole use or in combination with tooth rake to achieve desired appearance. Great for wet conditions and collecting debris in groomed areas. Rear QAS 76" (193cm) width, with 5 individual rake sections and spring teeth for excellent floatation and minimal surface disruption.

View Larger
Rear Tooth Rake

QAS Grooming rake designed to lightly scarify, pack, smooth and groom in one pass (for wet or dry conditions). Great for improving the performance of neglected sports fields. 72" (183cm) width, with 5 rake sections, 27 prongs adjustable for depth and wear.

View Larger
Front Spring Loaded Manual Blade

Spring balanced manual blade, designed for leveling out uneven areas. Comes with additional foot lever to enable operator to easily apply added down pressure. 40 (101 cm) width steel blade, spring assisted for raising plow.

View Larger
Rear Nail Drag

The QAS Nail Drag is a rear attachment offering precision scarification of skinned areas on sports fields. The QAS Nail Drag can be lifted and lowered hydraulically and has adjustable down-pressure across the entire width of the drag for a smooth, even scarification across all surfaces. Adding the Steel Drag Mat or the Coco Drag Mat to the QAS Nail Drag offers scarification and grooming in one easy step. In addition, the Steel Mat and the Coco Mat can also be used without engaging QAS Nail Drag and the Nail Drag Carrier System eliminates the need to manually lift drag mats between passes or fields.

View Larger
Sports Field Edger

Use the Sports Field Edger to ensure safe and playable transition interfaces by removing overgrown turf and infield lip build-up.

Lip Broom

Lip Broom

View Larger
Accessory Guide

View all available attachments and accessories in the Accessory Guide