Request A Demo

  • 27hp (20kW) Kohler® twin cylinder, gas engine
  • Ground Speed - Forward: 0-11.5 mph (0-18.5 km/h) Reverse: 0-2.5 mph (0-4 km/h)
  • Boom Assembly - 18.5ft (5.6m) triangular truss-style | optional expansion kit to 20.5ft (6.3m)
  • 175 Gallon (662 L) Tank Capacity

Earning the market leader position in turf vehicle sprayers comes from listening to what your customers truly want in a sprayer. Toro’s 175-gallon dedicated vehicle sprayer is the culmination of hundreds of hours of insightful customer input. The 1750 uses an advanced spray system design combined with cutting-edge sprayer controls and productive vehicle features to create the most advanced, efficient and accurate 175 gallon sprayer on the market. From aggressive agitation, faster response, consistent and accurate application rates, and intuitive rate set up, to precise vehicle control, this sprayer has it all.

View Larger
Rugged Spray Booms

  • The triangulated truss design provides protection to nozzles
  • Transport cradles with breakaway capability secure wing booms during transport
  • Lift and lower booms without leaving the seat
  • Spring-loaded breakaway system returns boom to spray position after an impact during forward or reverse travel
  • Reduce damage to trees or other objects with specially rounded boom ends
  • Three section 20.5’ (6.25 m) boom width

View Larger
Quick Find™ Console

The Quick Find™ Console helps the operator intuitively find boom and actuator switches with the palm of their hand and places command of all key vehicle and sprayer systems at the operator's fingertips for ease-of-use and improved control. The Info Center display and the analog pressure gauge, which are convieniently located just above the boom section and actuator switches, keeps all key sprayer operation data in the operator's line of sight.

View Larger
Chemical Tank

Elliptical tank design prevents chemicals from building up in 'dead spots'. Square tanks with interior ledges can lead to misapplication or residual chemicals left in the tank after the spray application. The tank incoporates a 16" side-offset fill well for easy access when loading chemicals. Durable polyethylene material won't crack, dent, rust, chip or peel. Three, 30-degree, side-mounted, agitation nozzles continuously 'roll' the tanks contents. Agitation nozzles are serviceable from outside of the spray tank.

Hill-Assist

To help prevent the 1750 from rolling backwards when parked on an incline, the hill-assist feature holds the vehicle while the operator releases the clutch pedal.

Ground Speed Proportional

Application rate remains consistent even when ground speed varies. If the operator speeds up, the pump speed is increased automatically which increases pump pressure. When the operator slows down, the pump pressure decreases accordingly. In other words, by directly linking the pump to the transmission, the system helps to ensure that fluctuations in ground speed will not affect application rate.

View Larger
Six Diaphragm Pump

An industry exclusive! This oversized pump satisfies the highest spray rates while simultaneously supplying aggressive agitation flow. The self-priming, positive displacement design means the pump can be run dry without damage. Its dry sump means there's no risk of oil/lubricant contaminating the spray application.

  • Engine
    27hp (20kW) Kohler®, CH740 Command series, twin cylinder, air-cooled, 4 cycle
  • Boom System
    18.5' (5.6 m) three section, triangular truss-style open booms
  • Ground Speed
    Forward 0 – 11.5 mph (0-18.5kph); Reverse 0 – 2.5 mph (0-4kph)
  • Height
    97” (246 cm) with booms folded in cradles
  • Length
    140” (356 cm) with booms folded in cradles
  • Nozzle Type
    Triple turret mount, Quick-disconnect with diaphragm check valves.
  • Seat
    Single high back cushion seat standard with manual position adjustment w/seatbelts
  • Spray Pump
    Hardi 363/5.5, 6-diaphragm positive displacement with 1” input shaft; input speed 300 - 1150 rpm, Flow rate of 41gpm @ 40psi (860 rpm).
  • Steering Controls
    Fully hydraulic: steering wheel turns, lock to lock: 3.5
  • Tank Capacity
    175 gallons (662 L)
  • Tires
    Front: Kenda K404 smooth (treadles); 20x10-10; Rear: Kenda turf tread; 24x13-12
  • Transmission
    3 speed forward, 1 reverse
  • Weight
    2200 lbs. (998 kg) shipping weight
  • Warranty
    2 year limited warranty
  • Width
    70” (178 cm) with booms folded in cradles
View Larger
17.5 gal (66.3 L) Fresh Water Rinse Kit

Automatic rinse system is safely and conveniently controlled from the operator seat. Rinse tank nests in front of the main tank, this system includes a separate electric pump, plumbing and dual rinse nozzles. At 5.8 gallons (22.0 L) per cycle, it has on-board capacity to complete a triple rinse process.

View Larger
Cleanload Eductor Kit

This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Incorporates a built-in bottle wash nozzle and has an optional suction lance to pull in powdered or liquid products from their container. Stores within the width of the spray vehicle.

View Larger
Electric Hose Reel Kit

150' (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan for stationary spraying.

View Larger
Foam Marking Kit

Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both using a turn-signal style control switch.

View Larger
Ultra Sonic Boom Leveling Kit

Sonar sensors automatically maintain proper spray boom height over undulating turf, helping to ensure a consistent, proper nozzle spray pattern.

View Larger
Drift Reduction Boom Shroud

Extends 12" (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality. Achieved the LERAP 3 Star certification rating (the highest) for drift reduction when used in conjunction with air induction nozzles versus standard flat fan nozzles without a boom shroud.

View Larger
Spray Nozzles

Full range of contact, systemic and low drift nozzles are available.Air inclusion nozzles provide improved accuracy, uniform droplet size, and reduced drift and even coverage.

Find the right nozzle for your application with our Nozzle Selector Tool

Documents Type Language
Data Sheet Multi Pro 1750 Sell Sheet English PDF