Request A Demo

  • Up to 32.5 hp (24.2 kW) Kubota® gas engine or 23 hp (17.2kW) Kubota® diesel engine *(Workman HD Series Specs.)
  • Ground Speed - Forward: 0-20 mph (0-32 km/h) Reverse: 0-7 mph (0-11.6 km/h)
  • Boom Assembly - 18.5ft (5.6m) triangular truss-style
  • 200 Gallon (757 liter) Tank Capacity

The Multi Pro WM spray system for Toro’s Workman® HD Series utility vehicles leverages the advanced spray system capability of Toro’s Multi Pro line and combines functionality with cutting-edge and intuitive sprayer controls. The result is the most advanced, efficient and accurate 200-gallon bed-mounted sprayer accessory for a utility vehicle on the market. Aggressive agitation, faster response times, consistent and accurate application rates, and intuitive rate set up, makes this the sprayer that has it all.

Quick Find™ Console

The Quick Find™ Console helps the operator intuitively locate boom and actuator switches with the palm of their hand and places command of all key vehicle and sprayer systems at the operator's fingertips for ease-of-use and improved control. The Info Center display and the analog pressure gauge, which are convieniently located just above the boom section and actuator switches, keeps all key sprayer operation data in the operator's line of sight.

Chemical Tank

Elliptical tank design prevents chemicals from building up in 'dead spots'. Square tanks with interior ledges can lead to misapplication or residual chemicals left in the tank after the spray application. The tank incoporates a 16" side-offset fill well for easy access when loading chemicals. Durable polyethylene material won't crack, dent, rust, chip or peel. Three, 30-degree, side-mounted, agitation nozzles continuously 'roll' the tanks contents. Agitation nozzles are serviceable from outside of the spray tank.

Six Diaphragm Pump

An industry exclusive! This oversized pump satisfies the highest spray rates while simultaneously supplying aggressive agitation flow. The self-priming, positive displacement design means the pump can be run dry without damage. Its dry sump means there's no risk of oil/lubricant contaminating the spray application.

Side-Agitation Nozzles

Four, 30°, side-mounted agitation nozzles continuously 'roll' the tanks contents. Agitation nozzles are serviceable from outside of the spray tank.

  • Boom System
    18.5’ (5.6m) three section, triangular truss style open booms
  • Nozzle Type
    Eleven nozzles turrets, triple turret mount, quick-disconnect with diaphragm check valves.
  • Spray Control
    Switches for spray pump, agitation, application rate, boom actuator, and boom on/off. Indicator lights on pump and throttle lock switches.
  • Spray Pump
    Hardi 364/10.0, 6-diaphragm positive displacement pump w/1” input shaft; input speed 0~540 rpm; Flow rate 45gpm (170.3L/m) @ 40psi (2.76 bar) at 540 rpm,
  • Tank Capacity
    200 Gallon (757 liter)
  • Width
    70" (178cm) with booms folded in cradles
  • Warranty 2 year limited warranty

    For complete product warranty information contact Toro Customer Service

View Larger
20 gal (75.7 L) Fresh Water Rinse Kit

Automatic rinse system is safely and conveniently controlled from the operator seat. Rinse tank nests in front of the main tank. The system includes a separate electric diaphragm pump, dedicated plumbing and dual rinse nozzles. At 6.5 gallons (24.6 L) per cycle, it has on-board capacity to complete a triple rinse process, saving precious time.

View Larger
Cleanload Eductor Kit

This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Incorporates a built-in bottle wash nozzle and has an optional suction lance to pull in powdered or liquid products from their container. Stores within the width of the spray vehicle.

View Larger
Electric Hose Reel Kit

150' (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan for stationary spraying.

View Larger
Foam Marking Kit

Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both using a turn-signal style control switch.

View Larger
Ultra Sonic Boom Leveling Kit

Sonar sensors automatically maintain proper spray boom height over undulating turf, helping to ensure a consistent, proper nozzle spray pattern.

View Larger
Drift Reduction Boom Shroud

Extends 12" (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality. Achieved the LERAP 3 Star certification rating (the highest) for drift reduction when used in conjunction with air induction nozzles versus standard flat fan nozzles without a boom shroud.

View Larger
Spray Nozzles

Full range of contact, systemic and low drift nozzles are available.Air inclusion nozzles provide improved accuracy, uniform droplet size, and reduced drift and even coverage.

Find the right nozzle for your application with our Nozzle Selector Tool

Documents Type Language
Data Sheet Multi Pro WM Sell Sheet English PDF
Data Sheet Multi Pro NozzAlert Sell Sheet English PDF
Nozzle Literature Nozzle Selection Guide English PDF