The Groundsmaster® 4000-D and 4010-D rotary mowers boast a powerful turbo-charged 55 hp (41 kW), Tier 4 Final compliant diesel engine, With the new Smart Power™ technology, high engine torque and patented, HybridDrive™ cutting deck system, the Groundsmaster 4000-D and 4010-D deliver power where you need it most – to cut grass, no matter how tough the conditions. With their excellent trimming capability and an ability to mow a 0” uncut circle, the Groundsmaster 4000-D and 4010-D are extremely efficient mowers.
The patented, parallel hydraulic traction system maintains consistent hydraulic flow between the front and rear wheels to assure full time 4-wheel drive. This allows you to mow with confidence, even on hills and wet grass. Operators can enjoy either the open air model in the 4000-D, or a climate-controlled, all-season safety cab with the Groundsmaster 4010-D.
The engine throttle-by-wire makes it easier to get to high or low idle and the electronic isochronous engine governor allows for a faster engine recovery time with no engine droop. Electronic Controlled Hydrostat allows for Smart Power to work as well as the electronically controlled pedal stop. The hydrostat allows the supervisor to set the maximum mowing speed of their operator. There is no mechanical link between the hydrostat and operator platform, reducing noise and vibration for the operator. The two Speed Drive Motors improves hydraulic efficiency allowing the mower to operate at 4WD in mow and transport improving fuel economy. Auto-idle will drop the machine down to low idle if the machine sits idle with the decks off for 5 seconds. This will save fuel when the operator does not remember to go down to low idle if sitting stationary. Automatically goes to high idle if out of neutral or PTO turned on.
The Groundsmaster® 4000-D/4010-D delivers 55 hp (41 kw). With so much power at your disposal, it's easy to digest even a large amount of wet, thick grass. With its unmatched engine torque and patented hydraulic motors that directly drive spindles on each deck, the 4000-D/4010-D delivers power where you need it most to cut tough grass. Plus, the shallow deck design forces quicker clipping dispersal, allowing the decks to accept more grass on a faster basis.
Operators will like the Groundsmaster® 4000-D/4010-D because it is amazingly quiet. Its low engine speed, low-noise technology gear motors, and a variable-speed cooling fan clutch all contribute to greatly reduced noise levels. Plus, amenities like air ride seat suspension, a multi-size beverage holder, 12-volt power outlet, and a portable radio holder make work more comfortable.
Heavy-duty welded steel decks and frames provide extra durability and long life. Each wing deck features a bi-directional, patent pending, impact absorption system. If a deck hits an object, a spring-loaded cylinder allows the deck to flex on impact, protecting deck components so you have less down time and more productivity.
The Groundsmaster® 4000-D/4010-D mowers are easy to service and requires fewer parts to stock. That's because the four drive belts, and the deck motors, blades, spindles, idlers, and spindle pulleys are all interchangeable. While rear discharge decks come standard, you can easily convert to Guardian® Recycler® decks which offer improved clipping management and additional safety.
The impressive trimming capability means you can get around even the smallest object. The rare ability to mow a 0" uncut circle - without wheel brakes - allows you to easily mow striping patterns without leaving any grass uncut. Smooth turning is made possible by a tight 55.5" (141 cm) wheelbase and an inner, rear-steering turning angle of 53.5 degrees.
In addition to effectively mowing a 62" to 11' (157.5 cm to 3.4 m) swath with its fast wing lifts, the Groundsmaster® 4000-D/4010-D offers incredibly tight trimming capabilities. It allows you to trim how you want with one, two, or all three decks engaged, depending on the situation. The 4000-D/4010-D also features a unique, patent pending, parallel hydraulic traction system in forward and reverse that makes it much easier to trim around a tree or object without scuffing even while traversing a hill.
Atomic® mulching blades feature an aggressive "tooth" design that shreds grass and leaves into small particles. The teeth curl upward behind the blade to suspend clippings in the chamber so they are cut and re-cut until they virtually disappear.
Turn your Toro Groundsmaster® into an Atomic® mulching machine!
Includes slow moving vehicle sign and lights to use when transporting on the road.