Dingo® 323
Product Information
- Model #: 22318
- Serial #: 312000001 - 312999999
- Product Type: Compact Utility Loaders
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Operator's Manual
-
EU Declaration of Conformity
-
Engine Evaporative Emission Warranty
Tire Chain Kit, Dingo (Part # 100-4140)
HELMET-FACE SHIELD (Part # 100-4143)
Light Kit for Dingo 320D (Part # 100-8940)
Light kit fits: Dingo 320D - Lamp 12V
Narrow Tire Assembly (Part # 104-0572)
Inner Tube (Part # 105-4070)
Genuine OEM Part
Rubber Foot Mat (Part # 105-5805)
Tire Tube (Part # 106396)
SPARE TIRE KIT ASM (Part # 144-0105)
Adjustable Forks, TX 1000 Compact Utility Loaders (Part # 22341)
CE CONVERSION KIT-WHEELED DINGO-PETROL (Part # 22366)
Standard Bucket (Part # 22409)
Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 4 cubic feet (1 cu. m.).
Light Materials Bucket (Part # 22410)
Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 6.4 cubic feet (.2 cu. m.), is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.
Utility Blade (Part # 22414)
The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from sidewalks in one pass.
Rotary Broom, Dingo (Part # 22415)
Counterweight, Dingo (Part # 22417)
Bore Drive Head (Part # 22420)
The Toro® Dingo® boring unit allows you to dig under sidewalks and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.
Rod and Reamer Kit (Part # 22421)
Used with 22420 to tunnel under driveways, sidewalks, etc.
Multi-Purpose Tool (Part # 22423)
This versatile attachment is actually 3 tools in 1! Easily converts into a ripper, boom or tow-bar by simply changing a few pins. Use these tools to move, carry, lift, prep, rip, dig up, transport and haul.
Power Box Rake, Dingo Compact Utility Loader (Part # 22425)
Stump Grinder Attachment (Part # 22429)
The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.
Hydraulic Tree Forks (Part # 22438)
The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to maneuver, helping you transport and position trees or shrubs exactly where you want them.
Cement Bowl (Part # 22442)
This unique attachment will mix and pour up to 200 pounds (90.7 kg) of dry cement. The specially designed auger flighting inside the cement bowl keeps the cement in the bowl during mixing. This same auger design permits cement to be poured into fence post holes with the posts in place!
The Eliminator Scarifier/Groomer, Dingo (Part # 22443)
Tiller (Part # 22445)
The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 6" (15.2 cm) deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.
Snowthrower, Dingo and Dingo TX (Part # 22456)
Trencher Head, Dingo Compact Utility Loader (Part # 22470)
High-Speed Trencher Head, Dingo Compact Utility Loader (Part # 22471)
Trencher Crumber (Part # 22477)
Trencher accessory to help clean out trenches.
24" x 4" Soil Chain (Part # 22480)
2-pitch chain w/4-pitch tooth spacing (24 station).
24" x 4" Combo Chain (Part # 22481)
2-pitch chain w/soil and rock teeth (24 station).
24" x 4" Rock Chain (Part # 22482)
Welded shark chain 100% rock tooth (24 station).
24" x 6" Soil Chain (Part # 22483)
2-pitch chain with 4-pitch tooth spacing (24 station).
24" x 6" Combo Chain (Part # 22484)
2-pitch chain with soil and rock teeth (24 station).
24" x 6" Rock Chain (Part # 22485)
Welded shark chain 100% rock tooth (24 station).
36" x 4" Soil Chain (Part # 22486)
2-pitch chain with 4-pitch tooth spacing (32 station).
36" x 4" Combo Chain (Part # 22487)
2-pitch chain with soil and rock teeth (32 station).
36" x 4" Rock Chain (Part # 22488)
Welded shark chain 100% rock tooth (32 station).
36" x 6" Rock Chain (Part # 22489)
Welded shark chain 100% rock tooth (32 station).
36" x 6" Soil Chain (Part # 22490)
2-pitch chain with 4-pitch tooth spacing (32 station).
36" x 6" Combo Chain (Part # 22491)
2-pitch chain with soil and rock teeth (32 station).
48" x 4" Soil Chain (Part # 22492)
4-pitch chain with 4-pitch tooth spacing (20 station).
48" x 4" Combo Chain (Part # 22493)
4-pitch chain with soil and rock teeth (20 station).
48" x 6" Soil Chain (Part # 22494)
4-pitch chain with 4-pitch tooth spacing (20 station).
48" x 6" Combo Chain (Part # 22495)
4-pitch chain with soil and rock teeth (20 station).
Narrow Bucket (Part # 22520)
Handle compact construction and remodeling sites by moving through 36" (91.4 cm) gates without a problem. This 35" (88 cm) wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tires.
Standard Bucket with Spacer (Part # 22522)
Addresses MA hoisting regulation. Results in 450 lb. rated operating capacity. Capacity = 4.3 cubic feet
Over-Tire Rubber Tracks, Dingo (Part # 22662)
Auger Head, Dingo and Dingo TX (Part # 22802)
Universal Swivel Auger Head, Dingo and Dingo TX (Part # 22803)
Vibratory Plow (Part # 22911)
The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.
24" Boom (Part # 22975)
24" trencher boom.
36" Boom (Part # 22976)
36" trencher boom.
48" Boom (Part # 22977)
48" trencher boom.
Soil Cultivator, Dingo Compact Utility Loader (Part # 23101)
Seeder Box Kit, Dingo Soil Cultivator (Part # 23120)
Concrete Breaker, Dingo Compact Utility Loaders (Part # 23135)
Backhoe Kit, Dingo (Part # 23161)
Backhoe, Dingo Compact Utility Loader (Part # 23163)
Adjustable Forks, Dingo Compact Utility Loader (Part # 23164)
Leveler (Part # 23165)
This versatile and highly productive tool is a must have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and trasporting materials around the job site.
Tube (Part # 232-37)
Left Hand Wheel and Tire Assembly (Part # 98-2747)
Left hand wheel and tire fits both front and rear position.
ASM - WHEEL/TIRE (Part # 98-4709)
Spark Arrestor (Part # 98-9099)
Toro OEM spark arrestor prevents carbon build ups from being ejected from the engine and igniting a fire.
Right Hand Wheel and Tire Assembly (Part # 99-1447)
Right hand wheel and tire fits both front and rear position.
WHEEL AND TIRE ASM RH (PO (Part # 99-3140)
WHEEL AND TIRE ASM LH (PO (Part # 99-3141)
Hydraulic Relief Valve Kit, Dingo (Part # 99-4360)
-
Model #
22318 -
Serial #
312000001 - 312999999 -
Product Name
Dingo® 323 -
Product Brand
Toro -
Product Type
Compact Utility Loaders -
Product Series
Compact Utility Loaders -
Engine/Motor Manufacturer
KOHLER -
Engine/Motor Size
23 hp -
Engine/Motor Type
4 Cycle -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
4wd
-
Engine: Battery
12V 340CCA -
Engine: Spark Plug Gap
.030"/ .76mm -
Chassis: Tire Pressure
15-20 PSI / 1-1.4kg sq. cm -
Drive System: Ground Speed
0-6.0km/hr / 0-3.7 mph -
Engine: Engine Oil Type
2.1 qts. -
Engine: Engine Speed
3600±75 RPM -
Engine: Spark Plug
Champion RC12YC or Champion Premium Gold 2071