Skip to main content

2000 Series 48 in. (122 cm) 24.5 hp 708cc

2000 Series 48 in. (122 cm) 24.5 hp 708cc

2000 Series 48 in. (122 cm) 24.5 hp 708cc

Product Information

Model #: 77280
Serial #: 410200000 - 411495391
Product Type: Riding Products

Parts

Search for a part within assembly drawings:

Showing Results

Drawing Title	Part Number	Description
Title

Air Cleaner Assembly No. 93-2190

Air Cleaner Assembly No. 93-2190

Air Intake and Filtration Assembly

Air Intake and Filtration Assembly

Blower Housing Assembly

Blower Housing Assembly

Carburetor Assembly

Carburetor Assembly

Caster Wheel and Fork Assembly

Caster Wheel and Fork Assembly

Control Console and Guard Assembly

Control Console and Guard Assembly

Crankcase and Crankshaft Assembly

Crankcase and Crankshaft Assembly

Deck Assembly

Deck Decal Assembly No. 126-8956

Deck Decal Assembly No. 126-8956

Deck Lift Assembly

Deck Lift Assembly

Deck Strut Assembly No. 126-8365

Deck Strut Assembly No. 126-8365

Deflector Assembly No. 120-2451

Deflector Assembly No. 120-2451

Electrical System Assembly

Electrical System Assembly

Engine, Clutch and Muffler Assembly

Engine, Clutch and Muffler Assembly

Fork and Caster Wheel Assembly

Fork and Caster Wheel Assembly

Frame Assembly

Fuel Assembly

Fuel System Assembly

Fuel System Assembly

Fuel Tank Assembly No. 126-4724

Fuel Tank Assembly No. 126-4724

Gasket and Seal Kit

Gasket and Seal Kit

Governor Control Assembly

Governor Control Assembly

Hydraulic Assembly

Hydraulic Assembly

Ignition and Cooling Fan Assembly

Ignition and Cooling Fan Assembly

LH and RH Motion Control Assembly

LH and RH Motion Control Assembly

LH Transaxle Assembly No. 126-2883

LH Transaxle Assembly No. 126-2883

Motion Control Assembly

Motion Control Assembly

Piston and Cylinder Head Assembly

Piston and Cylinder Head Assembly

Rear Wheel Assembly

Rear Wheel Assembly

RH Transaxle Assembly No. 126-2884

RH Transaxle Assembly No. 126-2884

Roll-Over Protection System Assembly No. 144-1848

Roll-Over Protection System Assembly No. 144-1848

Seat Assembly No. 144-3775

Seat Assembly No. 144-3775

Seat Mount Assembly

Seat Mount Assembly

Wire Harness Assembly No. 126-5803

Wire Harness Assembly No. 126-5803

Download Parts Catalog

Manuals

Operator's Manual

Service Manual

Parts Catalog

Setup Instructions

Product Warranty

ACMA Declaration of Conformity

Accessories (40)

Hypr-Oil™ 500 (quart)

Hypr-Oil™ 500 (quart) (Part # 114-4713)

Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.

Hypr-Oil™ 500 (gallon)

Hypr-Oil™ 500 (gallon) (Part # 114-4714)

Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.

Genuine OEM Part 114-4715

Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)

Toro Hypr-Oil 500 is a high-performance hydraulic fluid formulated and approved by Toro engineering for commercial zero turn and stand-on mower hydraulic systems. The 5-gallon commercial bulk pack is designed for fleet operators and service shops performing multiple machine hydraulic fluid changes. Maintaining the correct hydraulic fluid on schedule protects pumps, wheel motors, and other hydraulic components from accelerated wear. Refer to your operator manual for the correct change interval and capacity for each machine. Do not mix with other hydraulic fluids.

Genuine OEM Part 121-3783

Titan Hydraulic Filter and Service Kit (Part # 121-3783)

Hydraulic filters protect your Toro hydraulic system components from damage due to contamination, leakages, rust and damaged seals. Replacing these filters with a genuine Toro hydraulic filter prevents problems, protects the hydraulic system and keeps your Toro equipment at peak performance. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Empty Image Container

KIT, JACK W/ADAPTER (Part # 126-7282)

Empty Image Container

KIT, ADAPTER-JACK (Part # 126-7283)

Empty Image Container

COVER-HITCH (Part # 126-8299)

Genuine OEM Part 126-8379

Trash Container Kit (Part # 126-8379)

Toro genuine rider trash container kit. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Empty Image Container

CASTER WEIGHT SET KIT 87# [SERVICE] (Part # 126-8639)

Empty Image Container

TITAN HD 1500/2000 48IN RECYCLER KIT (Part # 126-8701)

Riding Mower Jack Kit

Riding Mower Jack Kit (Part # 127-6666)

This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.

Genuine OEM Part 127-6795

48 Inch MVP Blade & Belt Kit (Part # 127-6795)

Toro OEM blade and belt kit for Z-Master riding lawn mowers. To best protect your investment and maintain optimal performance of your turf equipment, count on Toro genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Toro High Back Seat Cover

Toro High Back Seat Cover (Part # 133-1308)

Toro genuine high back seat covers will take a beating and endure the daily wear and tear you put on it. These seat covers are carefully crafted and sewn from the highest quality, waterproof material, nylon/polyester fabric that ensures that your factory seats will always be protected. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Genuine OEM Part 133-2137

16.5 Inch Hi-Flow Blade (Part # 133-2137)

Toro 16.5 Inch OEM Hi-Flow blade. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Genuine OEM Part 133-2160

16.5 Inch Atomic Blade (Part # 133-2160)

Toro 16.5 Inch OEM Atomic blade. The Toro Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Genuine OEM Part 133-2163

165 Inch Recycler Blade (Part # 133-2163)

Toro 16.5 Inch OEM Recycler blade. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Genuine OEM Part 133-2137

16.5 Inch Hi-Flow Blade Pack - 6 Blades (Part # 133-2176)

Toro16.5 Inch OEM Hi-Flow blade pack. (6) Hi-Flow blades. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Genuine OEM Part 133-2163

16.5 Inch Recycle Blade pace - 6 Blades (Part # 133-2179)

Toro 16.5 Inch OEM Recycler blade pack. (6) Recycler blades. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Genuine OEM Part 133-2160

48 Inch Atomic Blade Pack - 6 Blades (Part # 133-2182)

Toro 16.5 Inch OEM Atomic blade. (6) blade pack. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Empty Image Container

Toro Genuine 5-Gallon bucket. (Part # 133-2533)

This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 136-7838

High Altitude Kit (Part # 136-7838)

Toro genuine high altitude kit. If the engine is ever to be operated above the altitude specified for the carburetor there needs to be less fuel to get the right air/fuel ratio. Toro high altitude kits keep your engine performing at its peak.

Spark Arrestor (Part # 137-8098)

Genuine OEM Part 138-6020

Z-Master Extended Bagging Control Levers Kit (Part # 138-6020)

Toro OEM extended bagging control levers provide an additional 2.5 inches of handle height to help ease reach and control of your Toro lawn care machine. Toro would like to remind you that fitment can vary by sub model, serial number, and/or production date of your equipment. Please refer to the original owners manual in order to verify this is correct part for your machine.

Toro V-Twin Engine Maintenance Kit (Titan HD/ Z Master 2000 Series)

Toro V-Twin Engine Maintenance Kit (Titan HD/ Z Master 2000 Series) (Part # 139-0649)

Toro maintenance kits contain everything the do-it-yourselfer needs to keep a Toro machine running like new. It's an easy and convenient way to ensure your Toro equipment will run its best year after year. All components are approved by Toro engineers for use with the Toro engines on the Toro TimeCutter chassis.

Genuine OEM Part 140-4896

Wheel and axle assembly (Z Master ) (Part # 140-4896)

Z Master wheel and axel assembly.

Empty Image Container

KIT-SLOPE SENSOR [RADIUS-RA] (Part # 142-2802)

Genuine OEM Part 144-1992

Toro Titan Mid Mount Light Kit (Part # 144-1992)

Extend your mowing day with these Toro genuine high-intensity, low amperage LED light kit. This lighting kit is built in durable cast aluminum alloy housing with stainless steel mounting hardware and wiring harness and lighted rocker switch. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Genuine OEM Part 144-1993

Riding Mower Jack Mount Kit (Part # 144-1993)

Genuine Toro jack mount kit. Mounts to the front of the mower and allows the owner to raise the mower to gain access to the underside of the deck to check blades or wash the deck. To best protect your investment and maintain optimal performance of your turf equipment, count on Toro genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts

Empty Image Container

HARDTOP SUN CANOPY (ARTICULATING) (Part # 144-3719)

Genuine OEM Part 145-3615

Handle Extension Kit (Part # 145-3615)

Genuine OEM Part

Empty Image Container

KIT-BUCKET MOUNT (Part # 145-3687)

Empty Image Container

KIT-UNIVERSAL MOUNT (Part # 145-3688)

Empty Image Container

KIT-TRIMMER MOUNT (Part # 145-3689)

Empty Image Container

KIT-TITAN HD TRIPLE THREAT ATTACHMENT (Part # 145-3691)

Empty Image Container

KIT-USB (Part # 145-8458)

Genuine OEM Part 490-7319

Titan Deluxe Cover (Part # 490-7319)

Toro OEM deluxe rider cover keeps your Titan riding lawn mower protected from the elements when not in use. Cover is made to withstand wear and tear and features elastic cord to keep cover in place. This Toro OEM mower cover is made from durable, weather-resistant material to protect your equipment from rain, sun, dust, and debris during storage. Verify your model and serial number to confirm the correct cover for your equipment.

Empty Image Container

E-Z Vac Blower & Drive Kit for 48" Deck - 5.0" Standard Bagger (Part # 78401)

Find a Dealer

HD BAGGER KIT (Part # 78431)

Empty Image Container

E-Z Vac Blower & Drive Kit for 48" Deck - 5.0" Heavy Duty Bagger (Part # 78433)

Find a Dealer

EZ VAC BAGGER - STANDARD (Part # 78481)

Product Details

Model #

77280

Serial #

410200000 - 411495391

Product Name

2000 Series 48 in. (122 cm) 24.5 hp 708cc

Product Brand

Toro

Product Type

Riding Products

Product Series

Zero Radius Turn, Commercial 2000 Series

Chassis Type

ZRT - LCE

Swath

48 inch / 122 cm

Discharge

Side Discharge

Engine/Motor Manufacturer

Toro

Engine/Motor Size

24.5 hp

Engine/Motor Type

4 Cycle

Engine Starter

Electric

Transmission Type

Hydrostatic

Traction Type

Rear WD

Specifications

Engine: Battery

12V 300CCA

Engine: Engine Speed

3600±100 RPM

Engine: Spark Plug Gap

.030"/ .76mm

Chassis: Height of Cut Range

1.5" - 5" (38-127mm)

Chassis: Tire Pressure

13 psi / 90 kPa

Drive System: Ground Speed

0-10 mph / 0-16kph

Engine: Ignition Coil Air Gap

0.011in (0.3mm)

Engine: Spark Plug

Champion RN9YC / NGK BPR6ES

Engine: Engine Oil Type

2.5 qts (80 oz. or 2.4L) 10W-30 with filter change

Drive System: Gearbox Lubricant

HYPR-OIL 500 / 20w-50 Synthetic Motor Oil