2. Professional Contractor
  3. Commercial Lawn Mowers, ZTR, Stand-On, and Walk-Behind
  4. 32" (81 cm) T-Bar (30672)

32" (81 cm) Fixed Deck Gear Drive T-Bar (30672)

Fixed Deck Gear Drive

Sell Sheet

Promotions

Highlights

  • Exclusive T-Bar steering is easy to use and reduces fatique
  • 14.5 HP Kawasaki® FS481V 603cc
  • 32" cutting deck for tighter areas
  • Flat-free semi-pneumatic caster tires reduce downtime

Overview

14.5 HP Kawasaki® FS481V 603cc Engine with 32" (81 cm) deck. Model shown 30692.

View Larger
T-Bar Steering Controls

Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.

View Larger
Rugged Deck Design

High-capacity 7/10 guage deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5" deep deck features 8" aluminum spindles and a rubber discharge chute.

View Larger
Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

View Larger
Extended Life Drive System

Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.

View Larger
Rugged Spindle Assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.

View Larger
A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

  • Engine
    14.5 HP* Kawasaki® FS481V 603cc
  • Fuel Capacity
    5 gallons (19 L)
  • Cutting Width
    32" (81 cm)
  • Height of Cut
    1" to 4-1/4" in 1/8" increments (2.5 cm to 10.8 cm in 3 mm increments)
  • Number of Blades
    2
  • Starter
    Recoil
  • Drive System
    5-Speed Transmission
  • Mulch, Bag, Side Discharge
    Side-discharge standard
  • Air Filter
    2-Stage Air Cleaner
  • Blade Tip Speed
    18,500 ft/min (5,486 m/min)
  • Brake System
    6" (15.2 cm) Band Brakes
  • Caster Tires
    9" x 3.50-4" (23 cm x 9 - 10 cm) Flat-free
  • Deck Design
    32" (81 cm) Side Discharge
  • Discharge Chute
    Rubber
  • Drive Tires
    13" x 5.00-6" (33 cm x 13 - 15 cm)
  • Ground Speed
    6.2 mph (10 km/h) fwd; reverse assist
  • Height
    41" (104 cm)
  • Horsepower
    14.5 hp
  • Length
    72" (183 cm)
  • Steering Controls
    T-Bar
  • Width
    32.8" (83 cm) with chute up
  • Weight
    400 lbs (181 kg)
  • Disclaimer
    *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

View Larger
Variety of Blade Kits

Atomic® mulching blades feature an aggressive "tooth" design that shreds grass and leaves into small particles. The teeth curl upward behind the blade to suspend clippings in the chamber so they are cut and re-cut until they virtually disappear.

View Larger
Recycler® Mulching Kits

Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

Soft Baggers

Cloth bag kit available for seasonal clean-up, or small debris collection jobs.

TRU TRAK® Sulky

Toro's patented TRU TRAK® sulky is the industry's most innovative sulky design. Large, independently pivoting foot plates greatly reduce operator fatigue while the 2-point connection eliminates jack-knifing in turns or reverse. The unit tracks "true" and straight every time. Foot pads pivot into stowed position when operating in conditions not conducive to sulky operation and for trailering convenience.

Select your serial number range from the options below to view parts & manuals.

30672 Serial #
405670000-999999999
404320000-405669999
400000000-404319999
316000001-316999999
315000001-315999999
314000001-314999999
313000001-313999999
312000001-312999999
311000001-311999999
310000001-310999999