Fixed Deck Hydro Drive

  • 36" (91 cm) TURBO FORCE 7-gauge deck
  • 14.5 HP* Kawasaki® FS481V 603cc
  • Hydrostatic pump & motor drive provides instant forward and reverse without shifting
  • Large 16" (40.6 cm) drive tires for excellent traction and superior floatation.

16 HP (12 kw) Kawasaki OHV V-Twin engine with 36" (91.4 cm) TURBO FORCE cutting technology deck. (Product shown 30986.)

View Larger
Exclusive TURBO FORCE Deck

High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.

View Larger
Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

View Larger
Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

View Larger
Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

View Larger
The Industry's Toughest Spindle Assembly

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

View Larger
A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

View Larger
Premium Hydraulics

Independent, commercial-duty .6 cu. in. (10 cc) displacement pumps and wheel motors provide instant forward and reverse control without shifting.

  • Engine
    14.5 HP* Kawasaki® FS481V 603cc
  • Fuel Capacity
    5 gallons (19 L)
  • Height of Cut
    1" to 4-1/4" in 1/8" increments (2.5 cm to 10.8 cm in 3 mm increments)
  • Number of Blades
    2
  • Starter
    Recoil
  • Mulch, Bag, Side Discharge
    Side-discharge standard
  • Air Filter
    2-Stage Air Cleaner
  • Adjustable Discharge
    Standard
  • Blade Tip Speed
    18,500 ft/min (5639 m/min)
  • CARB Compliant
    Model 39934
  • Caster Tires
    9" x 3.50-4" (23 x 9 - 10 cm) Flat-free
  • Deck Design
    36" (91.4 cm) Side Discharge
  • Discharge Chute
    High-performance 5/16" (8 mm) rubber
  • Drive Tires
    16" x 6.50-8" (40.6 x 16.5 - 20.3 cm)
  • Engine Displacement
    603cc
  • Ground Speed
    6.2 mph (10 km/h) fwd; 2.2 mph (4 km/h) rev
  • Height
    41" (104 cm)
  • Hydraulic Drive
    Twin Hydro-Gear® Pumps
  • Hydraulic Fluid
    Premium Synthetic
  • Length
    74" (188 cm)
  • Spindle Housing
    Cast iron with 9-3/8" (23.8 cm) base
  • Steering Controls
    Pistol Grips
  • Transmission
    Hydrostatic
  • Width
    37.1" (94 cm)
  • Weight
    460 lbs (208 kg)
  • Disclaimer
    *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
Soft Baggers

Cloth bag kit available for seasonal clean-up, or small debris collection jobs.

TRU TRAK® Sulky

Toro's patented TRU TRAK® sulky is the industry's most innovative sulky design. Large, independently pivoting foot plates greatly reduce operator fatigue while the 2-point connection eliminates jack-knifing in turns or reverse. The unit tracks "true" and straight every time. Foot pads pivot into stowed position when operating in conditions not conducive to sulky operation and for trailering convenience.

Select your serial number range from the options below to view parts & manuals.

Serial #
310000001-310999999
311000001-311999999
314000001-314999999
315000001-315999999
316000001-316999999
400000000-999999999