• Powerful 37 HP Yanmar® Diesel 1642cc Engine
  • 60” (152.4cm) Rear Discharge TURBO FORCE® deck
  • Mow smarter with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance
  • Deluxe suspension seat with iso-mounts to reduce operator fatigue and vibration

Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. Maximum productivity with a rear discharge 60" commercial cutting deck. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.

View Larger
Superior Performance

Powered by a Tier 4-compliant, three-cylinder, 1.6 liter, 37 hp Yanmar diesel engine, this mower is packed with power to tackle the toughest mowing jobs.

View Larger
The New Standard In Comfort

The floor pan and deluxe suspension seat are iso-mounted to reduce vibration. That results in a better operator experience and more productivity.

View Larger
Extended Service Intervals

Save on maintenance with extended service intervals and a deck design that uses up to four matching blades. The mower is also backed by a 5-year, 2,000-hour warranty (first two years no-hour-limit).

View Larger
Mow Smarter

All 7500-D models are equipped with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance.

  • Engine
    37 hp* Yanmar® Diesel 1642cc
  • Fuel Capacity
    Diesel/12.5 Gal (45.4 L)
  • Cutting Width
    60” (152.4 cm) (Rear Discharge)
  • Air Filter
    Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor
  • Anti-Scalp Wheels
    4 Standard, 2 Side Skids
  • Armrests
    Standard
  • Blade Tip Speed
    18,200+ ft/min
  • Blade Type
    3 blades at 20.5" length
  • Caster Tires
    15” x 6” – 6” (38.1 x 15.2 x 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch
    Wet Disc
  • Deck Design
    7-Gauge TURBO FORCE® w/ Bull-Nose Bumper
  • Drive System
    17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
  • Drive Tires
    26" x 12" – 12" (66.0 x 30.5 x 30.5 cm)
  • Engine Horsepower
    37 HP
  • Engine Displacement
    1642cc
  • Foot Operated
    Height of Cut

    Hydraulic with Rocker Switch
  • Ground Speed
    12.5 mph (20.1 km/h)
  • Height
    ROPS Height (Folded) 51" (129.5 cm), ROPS Height (Upright) 71.8" (182.4 cm)
  • Height of Cut
    1.0” – 5.5” (2.5 – 14.0 cm)
  • Hour Meter
    Horizon™ Technology
  • Length
    100.68" (255.7 cm)
  • ROPS
    Standard
  • Seat
    Deluxe Suspension (Iso-Mount, Flip-Up)
  • Spindle Bearings
    Maintenance-Free
  • Spindle Housing
    9" (22.9 cm) Diameter Cast Iron, 1" (2.5 cm) Heavy-Duty Spindle Shaft
  • Steering Controls
    1-5/8" (4.1 cm) Dia. Grips; Adjustable, Dampened
  • Weight
    2,136 lbs. (969 kg)
  • Warranty
    5 Year 2000 Hour Limited Warranty (No Hour Limit first 2 years)**
  • Width
    Deck Clearance Width 66.3" (168.4 cm)
  • Disclaimer
    * The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
    **See retailer for warranty details.

Select your serial number range from the options below to view parts & manuals.

Serial #
400000000-402252594
402252595-404399999
404400000-999999999