Request A Demo

  • 24.8 hp (18.5 kW) Kubota® diesel engine w/Four 12V AGM Lead Carbon Batteries
  • 2WD or CrossTrax™ AWD Traction Drive
  • 100" (2.5m) Cutting Width
  • Ground Speed - Mowing: 0-8 mph (0-12.8 km/h) Transport: 0-10 mph (0-16.1 km/h)

The Reelmaster® 5010-H is the industry’s first and only fairway mower with a true hybrid drive system. The Reelmaster 5010-H utilizes a Kubota 24.8 hp diesel engine in concert with an in-line motor generator and a self-recharging 48-volt battery pack to provide seamless power to the vehicle and cutting units. The combination of these two power sources comprises Toro’s patented hybrid power delivery system called PowerMatch™. PowerMatch enables the Reelmaster 5010-H to match the power generated to the power required for all cutting conditions. The result is the availability of over 40 horsepower, but only when cutting conditions require it, which saves on average 20% fuel usage, improving operating costs, and the vehicle’s carbon footprint.

Power and Performance (RM 5010H)

With over 40 available horsepower, the PowerMatch system can handle verticutting, scalping, and steep hills. Power is used so efficiently through the PowerMatch™ system that the Reelmaster 5010-H can perform at least on-par, and in many cases better than much higher horsepower machines. Three years of vigorous field and real-world testing have proven the Reelmaster 5010-H has the power to perform in the most rigorous golf course conditions, and the efficiency to keep it up year after year.

48 Volt Battery Pack

The battery pack is made up of four, 12-volt, Absorbed Glass Mat (AGM) batteries that are maintenance-free and sealed. The batteries are very similar to the ones used in the automobile industry for start-stop hybrids. These batteries are designed for a very long life when they are shallowly discharged and repeatedly recharged with a system like our PowerMatch™. Depending on usage, the life expectancy will vary, but in an average golf course duty cycle, the battery pack can be expected to last over 2,500 hours of operation.

Worry Free

Removing the hydraulic cutting mowers and replacing them with electric motors on the Reelmaster 5010-H resulted in over 100 fewer leak points than a conventional 254 cm fairway mower. The remaining vehicle and cutting unit lift system hydraulic lines are predominately hard lines or hoses with limited movement, and are not subject to the same fatigue or service intervals as the cutting unit hoses and motors.

Versatility (RM 5010H)

The Reelmaster 5010-H has a Plug and Play feature that allows it to accept 5-inch or 7-inch diameter DPA cutting units. Simply plug in the cutting unit and motors of your choice and the machine automatically make all the necessary adjustments. The 5010-H can be equipped with 5" or 7" reels, in either 8 or 11 blade configurations.

Efficient Reel Performance

The electric reel motors allow for precise setting of the clip and consistent power across all five cutting units for a superior cut. The cutting units also feature low-drag seals and low-friction bearing which improve wear and reduce the required horsepower to run the decks.

Precision Control

The Reelmaster 5010-H’s InfoCenter display will actually make maintenance and diagnostics quicker and easier for technicians. The on-board LCD display provides system information alerts, service reminders, diagnostics, fault codes and vehicle and cutting unit adjustments that are easy to see and understand. Precisely control reel speed and clip rate, monitor reel performance and view reel diagnostics with the on-board InfoCenter.

  • Engine
    Tier 4 compliant Kubota® 3-cylinder, liquid-cooled, diesel engine. 24.8 hp (18.5 kW). Four 12V Absorbed Glass Mat (AGM), sealed, maintenance-free lead acid batteries.
  • Fuel Capacity
    14 gallon (53 liter) capacity. Biodiesel-ready for use up to B-20 (20% biodiesel and 80% petrol blend)
  • Mowing Speed
    0-8 mph (0-12.8 km/h) forward; 0-4 mph (0-6.4 km/h) reverse
  • Transport Speed
    0-10 mph (0-16 km/h) forward transport
  • Controls
    Intuitive controls provide improved operator efficiency and safety.
  • Cooling System
    Rear mounted radiator with industrial tube and fin construction, 6 fins per inch, 5.5 quart (5.2 liter) system capacity.
  • Height
    63" (160 cm) seat top, 85.5" (217.2 cm) top of ROPS.
  • Hydraulic Fluid
    11 gallon (56.8 liter) system capacity
  • Reel Drive
    Reel drive circuit is split independently for front and rear cutting units. Reel speeds are electronically adjustable in nine incremental settings. On-board backlapping is standard.
  • ROPS
    Standard with seat belt
  • Seat
    Deluxe high back suspension seat with fore, aft, height and weight adjustment
  • Steering Controls
    Rear wheel, power steering with an independent hydraulic pump and circuit.
  • Tank Capacity
    14 gallon (53 liter) capacity. Biodiesel-ready for use up to B-20 (20% bodiesel and 80% petrol blend)
  • Tires
    Front traction tires: 26.5 x 14-12 turf tires; Rear steer tires: 20 x 12-10
  • Traction Drive
    Front drive wheels powered by a hydrostatic pump with individual wheel motors. All-wheel drive optional with Cross Trax® All-Wheel Drive system.
  • Weight
    5" cutting units: 2WD - 2,776 lbs (1,259 kg), 4WD - 2,827 lbs. (1,282 kg) 7" cutting units: 2WD - 2,907 lbs. (1,319 kg); 4WD - 2,965 lbs. (1,345 kg)
  • Warranty
    2 year limited warranty. Refer to the Operator's Manual for further details.
  • Wheelbase
    60" (152.4 cm)
  • Width
    Operational width: 116" (288.3 cm); Transport width: 92" (233.7 cm)
View Larger
Verti-Cutting Reels

Used to minimize, remove and control thatch to prevent scalping and disease. Cut the rhizomes and stolons to enable regenerative grass growth. Extended wear carbide tipped blades are standard.

View Larger
Powered Rear Roller Brush

The optional real roller brushes promote consistent grass dispersal to help your turf look immaculate. Multiple points of contact and faster rotation provide improved clipping dispersion in wet, sticky conditions.

View Larger
Groomer with Optional Broomer™

Groomers provide improved quality of cut by lifting turf and reducing grain. Also helps knock off dew, disperse grass clippings and integrate clippings into the grass canopy. Optional Broomer provides full width Brooming effect to enhance grooming results. Groomer offers Quick Set™ design which does not require tools to lower or raise blades.

View Larger
CrossTrax® All-Wheel Drive Kit

Based off our patented series/parallel 3-wheel drive kit, the CrossTrax® system automatically transfers power from the front tires to the opposite rear tires to minimize spinouts and maximize traction on wet terrain. ROPS and seatbelt included.

View Larger
Air-ride Seat Suspension System

Convert the standard seat suspension to air-ride for rough applications to provide more comfortable ride for operators logging long hours in the seat.

View Larger
Universal Mount Sunshade

This hard shell canopy protects the operator from the sun and rain. Mounts to the ROPS.

Documents Type Language
Product Literature Reelmaster 5010-H Features Brochure English PDF
Data Sheet Reelmaster 5010-H Sell Sheet English PDF
Articles Reelmaster 5010 Series Aftercut Appearance Article English PDF
Data Sheet EdgeSeries Reels Sell Sheet English PDF