MSRP: $999.00 USD

Buy Online

  • Power Up - Optimal performance and years of dependable use with the 252cc Toro premium 4-cycle OHV engine.
  • Self-Propelled - Quickly and easily cut through snow with total speed control, 6 speeds forward and 2 speeds reverse.
  • Chute Control - Quickly change the chute and deflector direction with a single, smooth motion thanks to the Quick Stick® chute control.
  • Stay the Course - Minimizes clogging and routes heavy snow away from chute and back into the auger with Toro’s patented Anti-Clogging System.

Winter's biggest snowfalls are no match for the self-propelled Power Max® 824 OE Snow Blower. With a 252cc Toro Premium 4-cycle OHV engine leading the charge, you'll muscle through the toughest snow and ice Mother Nature has to offer. And you'll be back inside for dinner before your neighbors, too, thanks to a 24-inch-wide clearing width and 20 inch intake height that make quick work of even the deepest snow. The innovative Quick Stick® control allows you to change the steel chute direction and chute deflector with a single, smooth motion. Convenient one-hand operation levers allow single-handed use, freeing the other hand to change speeds or the chute control without stopping. The exclusive Anti-Clogging System monitors snow intake to reduce clogging and maximize clearing efficiency. The blower is also equipped with hardened gears in your auger gearbox - there are no shear pins to replace.Instead, if the auger hits hard material, the engine will purposely stall to prevent damage. Ideal for concrete, asphalt and gravel surfaces. And with Toro's 3-year limited warranty, you can rest easy knowing that you're prepared for anything winter has in store. Count on it.

Storage dimensions: 56" x 25.8" x 43.5" (142.2 cm x 65.5 cm x 110.5 cm).

Choose the right fuel for your snow blower. For best starting results use Non-ethanol fuel with an octane rating of 87 or higher. Use fresh fuel less than 30 days old, add fuel stabilizer to reduce starting problems. Do not mix oil with gas. For more information, view our Fuel Fact Tips.

View Larger
Power Up

Optimal performance and years of dependable use with the 252cc Toro premium 4-cycle OHV engine.

View Larger
Self-Propelled

Quickly and easily cut through snow with total speed control, 6 speeds forward and 2 speeds reverse.

Toro's Exclusive Quick Stick Chute Control
Chute Control

Quickly change the chute and deflector direction with a single, smooth motion thanks to the Quick Stick® chute control.

Toro Anti-Clogging System
Stay the Course

Minimizes clogging and routes heavy snow away from chute and back into the auger with Toro’s patented Anti-Clogging System.

No Shear Pins To Replace
Don't Stop!

No shear pins needed so none to break and replace in the cold with Toro's hardened gears and auger gearbox.

View Larger
Built to Last

Tackle years of tough jobs with confidence thanks to steel construction in the housing, frame, deflector and chute.

  • Auger System
    Anti-Clogging System (ACS), 11” / 28 cm Dia., Hardened Gears; no shear pins needed
  • Chute Control
    Quick Stick® (200˚ Rotation), Steel, Double Deflector
  • Clearing Width
    24” (61 cm) clearing width, 20” (51 cm) intake height
  • Drive System
    Friction Disk
  • Engine
    Toro Premium 252cc OHV 4-cycle
  • Engine Displacement
    252cc
  • Fuel Capacity
    3.1 Quarts (3.0 L)
  • One-Hand Interlock
    Standard
  • Scraper
    Adjustable
  • Skid Shoes
    Standard
  • Speeds
    6 Fwd. / 2 Rev.
  • Starter
    Electric Start
  • Throw Distance
    Up to 45’ (13.5 m)*
  • Tires
    15” x 4” (39 cm x 10 cm)
  • Weight
    171 lbs. / 78 kg
    Storage dimensions: 56" x 25.8" x 43.5" (142.2 cm x 65.5 cm x 110.5 cm).
  • Disclaimer
    *Capacity and throw distance will vary with conditions.
    **See retailer for full warranty details. Specifications subject to change without notice and without incurring obligation.
  • Warranty 3-Year Limited**
    Guaranteed for Life Warranty** - ACS only (Original owner only)

    37798 Product Warranty

View Larger
Weight Kit (Part # 107-3815)

Provides balance for snowthrower when additional weight of snow cab is added as an option.

View Larger
Snow Cab (Part # 127-5960)

Heavy-duty vinyl with clear, freeze resistant windows protects you from the wind and snow. Weight kit (part number 107-3815) is needed when using Snow Cab.

View Larger
Non-Marking Poly Skids (Part # 38211)

Protect your driveway and sidewalk surfaces by using these non-marking poly skids. Reversible for double the life.

View Larger
Heavy-Duty Cast Iron Skids (Part # 38212)

Designed to be .5" thick for maximum life. The added weight on the front helps to chew through deep snow piles. Reversible for double the life. (includes 2 skids (part # 120-3098-03) and hardware)

View Larger
Drift Breaker (Part # 38213)

Knocks down large drifts, allowing auger to collect and throw deep snow. Available as an option on all Toro two stage snowthrowers.

View Larger
Two-Stage Cover (Part # 490-7466)

Protect your investment with a snowthrower cover made of heavy-duty polyester that's waterproof, abrasion, and tear resistant. This cover is vented to promote air circulation and minimize heat and moisture build-up.

Select your serial number range from the options below to view parts & manuals.

37798 Serial #
406700000-999999999
405866400-406699999
400000000-405866399