GrandStand Mower, With 91cm Rear Discharge TURBO FORCE Cutting Unit
Product Information
- Model #: 74540TE
- Serial #: 418000000 - 419999999
- Product Type: Riding Products
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Operator's Manual
-
Parts Catalog
-
Product Warranty
-
Setup Instructions
-
EU/UK Declaration of Conformity
GrandStand Light Kit (Part # 114-3505)
This genuine Toro OEM LED light kit is designed for GrandStand stand-on mowers and provides reliable, high-intensity illumination for mowing in low-light conditions — including early morning starts, evening mowing, and shaded or tree-canopy areas. The kit uses low-amperage LEDs in a cast aluminum housing with stainless steel hardware and a complete wiring harness. One of the most frequently purchased GrandStand accessories at the time of machine purchase for operators who need to maximize mowing hours. Verify your model and serial number before ordering.
Hypr-Oil™ 500 (quart) (Part # 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
Hypr-Oil™ 500 (gallon) (Part # 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid formulated and approved by Toro engineering for commercial zero turn and stand-on mower hydraulic systems. The 5-gallon commercial bulk pack is designed for fleet operators and service shops performing multiple machine hydraulic fluid changes. Maintaining the correct hydraulic fluid on schedule protects pumps, wheel motors, and other hydraulic components from accelerated wear. Refer to your operator manual for the correct change interval and capacity for each machine. Do not mix with other hydraulic fluids.
GrandStand Weight Kit (Part # 117-3620)
Weight Kit for Toro Grandstand models. Helps distribute weight for a smooth ride and an even cut on rough terrain. This Toro OEM weight kit helps improve traction and stability on slopes and uneven terrain by adding ballast to the front or rear of your mower. Verify your model and serial number to confirm compatibility before ordering.
Stripping Kit (Part # 117-8560)
The Toro Striping Kit allows you to create "ballpark" stripes and patterns in your lawn while you mow. Striping kits lay the grass down in the direction of travel. The Toro OEM striping kit creates defined light and dark stripes in your lawn by pressing grass down in the direction of travel as you mow — the contrast in light reflection produces the 'ballpark' stripe effect. The kit's downward pressure is adjustable, allowing you to vary the intensity of the stripe. Verify your model and serial number to confirm compatibility before ordering.
GrandStand Operator Chute Gate Kit (Part # 117-8565)
Toro OEM chute gate kit. Protect people and property from flying debris, keep grass out of flower beds and driveways, reducing raking, blowing and re-mowing. This Toro OEM discharge chute kit allows the operator to direct or block the flow of clippings from the mower deck, helping to prevent debris from reaching flower beds, driveways, or bystanders. Verify your model and serial number to confirm compatibility before ordering.
Oil Filter Replacement (Part # 119-5852)
This genuine Toro OEM replacement oil filter removes contaminants — including dirt, metal particles, and other debris — from your engine oil as it circulates, helping to protect critical engine components from wear and extending the life of both the oil and the engine. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your Toro equipment.
Fuel Filter Replacement (Part # 120-2235)
This genuine Toro OEM replacement fuel filter prevents dust, water, and fuel contaminants from reaching the engine's carburetor or fuel injection system, protecting cylinders, pistons, and other components that would otherwise require costly repair. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your equipment.
Air Filter Element - Primary Replacement (Part # 120-7447)
This genuine Toro OEM replacement air filter is your engine's first line of defense against the dirt and debris that is thrown up during mowing. When functioning correctly, the air filter prevents particles from reaching the carburetor and entering the engine, protecting cylinders, pistons, and other internal components from accelerated wear. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your equipment.
Trash Container Kit (Part # 121-7530)
This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.
Spark Plug Replacement (Part # 92-2153)
This genuine Toro OEM replacement spark plug is engineered to the exact specifications of your Toro equipment's engine, ensuring reliable ignition, consistent combustion, and peak engine performance. A worn or fouled spark plug is one of the most common causes of hard starting, rough idling, and reduced fuel efficiency in small engines. Refer to your operator manual for recommended replacement intervals and to confirm the correct plug for your model.
Spark Arrestor (Part # 98-9099)
Toro OEM spark arrestor prevents carbon build ups from being ejected from the engine and igniting a fire. Verify your model and serial number to confirm compatibility before ordering.
-
Model #
74540TE -
Serial #
418000000 - 419999999 -
Product Name
GrandStand Mower, With 91cm Rear Discharge TURBO FORCE Cutting Unit -
Product Brand
Toro -
Product Type
Riding Products -
Product Series
Professional Grade Stand-on Mowers -
Chassis Type
Stand On -
Swath
91cm -
Discharge
Side -
Engine/Motor Manufacturer
Kawasaki -
Engine/Motor Size
15 hp -
Engine/Motor Type
4 Cycle -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
2wd
-
Engine: Battery
12V 300CCA -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Engine: Ignition Coil Air Gap
.008-.016" / .2-.4mm -
Engine: Engine Oil Type
1.8 qt (1.7L) 10w-30 engine oil API SF or higher -
Engine: Engine Speed
2600±100 RPM -
Drive System: Gearbox Lubricant
HYPR-OIL 500 / 15w-50 Synthetic Motor Oil -
Chassis: Height of Cut Range
1" - 5" (25-127mm) -
Chassis: Tire Pressure
12-14psi (83-97kPa) -
Drive System: Ground Speed
Up to 8 mph