eDingo TX 750 right side with grapple bucket

Sell Sheet

New

eDingo® TX 750 Electric Track Loader, Narrow

Model: 22230
UPC/EAN: 21038222301

See All Items in eDingo TX 750

$66,456.00 USD

Please contact your local dealer

Available at select retailers:

Rated operating capacity of 750-lbs.
Easily clear the side of 30-yard dumpsters or one-ton trucks
Powered by HyperCell Power System® delivers up to 8 hours of continuous runtime.

Top

Overview

Meet the unique demands of interior construction and demolition with the productivity-boosting Toro® eDingo® TX 750. Toro’s patented HyperCell® Battery technology offers up to eight hours of quiet runtime and zero engine exhaust emissions. Intuitive controls and compact design allow operators to easily maneuver in tight spaces while saving time, reducing fatigue and boosting productivity.

Features

Rated Operating Capacity (ROC)

This compact powerhouse can lift up to 750 lbs

81-inch hinge pin height

Easily clear the side of 30-yard dumpsters or one-ton trucks

Powered by HyperCell

Toro’s proprietary battery technology offers reduced noise, zero engine exhaustemissions and all-day runtime*.*Run time may vary depending on attachment being used

Specifications

Battery	Toro HyperCell Lithium Ion
Battery Capacity	22.3 kWh
Battery Charging Requirements	240V
Battery Chemistry	Toro HyperCell Lithium Ion
Dump Angle	40 deg
Fuel Type	Electric
Ground Clearance	5.8 in. / 14.7 cm
Ground Speed - Forward	Up to 4.0 mph / 6.4 kph
Ground Speed - Reverse	Up to 2.0 mph / 3.2 kph
Height	54.5 in. / 138.4 cm
Hinge Pin Height	81 in. / 205.7 cm
Length	66 in. / 167.6 cm
Loader Arms	Radial
Max Operating Height	106.6 in. / 270.7 cm
Rated Operating Capacity*	750 lbs / 340 kg
Reach - Fully Raised	21.2 in. / 53.6 cm
Tip Capacity	2,142 lbs / 971.5 kg
Track Length	126.6 in. / 321.5 cm
Track Width	5.4 in. / 13.7 cm
Tracks	MERT track with “B” style tread
Traction	Electrically Driven
Weight	2,561 lbs / 1,161.6 kg
Width	31.5 in. / 80.65 cm

Accessories

Charger Cable (Part # 122-3489)

Charger Cable - EU (Part # 122-3490)

CABLE-ASSEMBLY, CHARGER (Part # 122-4204)

Toro 5 Gallon PX Extended Life Hydraulic Fluid (Part # 133-8086)

Toro 5 Gallon PX Extended Life Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.

Toro 55 Gallon PX Extended Life Hydraulic Fluid (Part # 133-8087)

Toro 55 Gallon PX Extended Life Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.

Toro PX Extended Life Hydraulic Fluid - 1 Gallon/4pack (Part # 138-9460)

Toro PX Extended Life Hydraulic Fluid. Designed for use in Toro equipment created by Toro engineers. If you are unsure of your equipment needs, do a model extreme serial number search to verify that this is the correct oil type for your equipment.

Loader Bucket Attachment 4 Cubic Feet (Part # 22340)

Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 4 cubic feet (1 cu. m.).

Loader Bucket Attachment 9 Cubic Feet (Part # 22342)

Designed for Dingo® TX 1000, volume = 9.0 cubic feet. This high volume loader bucket attachment is great for moving rock, dirt, sand or other materials off and around the job site. Ideal for jobs with large amounts of material to move.

Loader Bucket Attachment (Part # 22409)

Light Materials Loader Bucket Attachment (Part # 22410)

Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 6.4 cubic feet (.2 cu. m.), is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.

Utility Blade Attachment (Part # 22414)

The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from sidewalks in one pass.

Bore Drive Head Attachment (Part # 22420)

The Toro® Dingo® boring unit allows you to dig under sidewalks and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.

Rod and Reamer Kit (Part # 22421)

Easily bore under driveways and sidewalks to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 19". Bits and reamers up to 3.5" in diameter.

Stump Grinder Attachment (Part # 22429)

The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.

Tree Fork Attachment (Part # 22438)

The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to maneuver, helping you transport and position trees or shrubs exactly where you want them.

Tiller Attachment (Part # 22445)

The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 6" (15.2 cm) deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.

Trencher Crumber (Part # 22464)

Spring design, trencher accessory to help clean out trenches

Trench Backfiller Attachment (Part # 22472)

Designed for time and money-saving efficiency, this attachment lets operators fill trenches in a single pass. Two sets of opposing augers direct the spoils from the sides of the trench back into the hole, while the filler levels off the work area and fluffs the turf on each side of the trench minimizing its footprint

High Torque Trencher Attachment (Part # 22473)

High-torque trencher head with heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 50" (127 cm) below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

High Speed Trencher Attachment (Part # 22474)

Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.

Trencher Crumber (Part # 22477)

Trencher accessory to help clean out trenches.

4-in-1 Bucket Loader Bucket Attachment (Part # 22478)

Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525 and TX 1000 models, this attachment offers the versatility of 4 attachments. Use as a standard bucket, a leveler, a grapple rake and a blade.

24" x 4" Soil Chain (Part # 22480)

2-pitch chain w/4-pitch tooth spacing (24 station).

24" x 4" Combo Chain (Part # 22481)

2-pitch chain w/soil and rock teeth (24 station).

24" x 4" Rock Chain (Part # 22482)

Welded shark chain 100% rock tooth (24 station).

24" x 6" Soil Chain (Part # 22483)

2-pitch chain with 4-pitch tooth spacing (24 station).

24" x 6" Combo Chain (Part # 22484)

2-pitch chain with soil and rock teeth (24 station).

24" x 6" Rock Chain (Part # 22485)

Welded shark chain 100% rock tooth (24 station).

36" x 4" Soil Chain (Part # 22486)

2-pitch chain with 4-pitch tooth spacing (32 station).

36" x 4" Combo Chain (Part # 22487)

2-pitch chain with soil and rock teeth (32 station).

36" x 4" Rock Chain (Part # 22488)

Welded shark chain 100% rock tooth (32 station).

36" x 6" Rock Chain (Part # 22489)

Welded shark chain 100% rock tooth (32 station).

36" x 6" Soil Chain (Part # 22490)

2-pitch chain with 4-pitch tooth spacing (32 station).

36" x 6" Combo Chain (Part # 22491)

2-pitch chain with soil and rock teeth (32 station).

48" x 4" Soil Chain (Part # 22492)

4-pitch chain with 4-pitch tooth spacing (20 station).

48" x 4" Combo Chain (Part # 22493)

4-pitch chain with soil and rock teeth (20 station).

48" x 6" Soil Chain (Part # 22494)

4-pitch chain with 4-pitch tooth spacing (20 station).

48" x 6" Combo Chain (Part # 22495)

4-pitch chain with soil and rock teeth (20 station).

Narrow Loader Bucket Attachment (Part # 22520)

Handle compact construction and remodeling sites by moving through 36" (91.4 cm) gates without a problem. This 35" (88 cm) wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tires.

Grapple Rake Attachment (Part # 22577)

The Toro grapple rake attachment allows operators to grab, drag, lift, and place materials with ease. The grapple has two heavy-duty cylinders capable of producing 3000 pounds of clamping force at the tine tips, insuring you can "grab-ahold" and not let go.

Snow Thrower Attachment (Part # 22585)

The Toro snow thrower attachment has enough power for heavy-duty performance in wet snow condition, plus a gentle touch for lighter conditions. The maximum hydraulic flow is 15.5 gpm and the chute articulation is electrical, so the operator never needs to worry about hand cranking.

Adjustable Forks Attachment (Part # 22586)

The Toro Dingo adjustable forks greatly increase the productivity and performance of your Dingo system. This versatile attachment can be used for a variety of material handling jobs to move posts, rocks, trees, pallets, etc. around the job site. It's like having a roving workstation to transport heavy materials around the job site without fatigue. For use on all Dingo models, except Dingo TXL 2000.

Grapple Bucket Attachment (Part # 22590)

Designed for contractors looking for a bucket to grab, drag, lift and remove materials on residential, commercial and demolition sites. Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525, TX 1000 and e-Dingo models.

Multi-Purpose Tool Attachments (Part # 22672)

This versatile attachment is actually 2 tools in 1! Easily converts into rib or tow-bar by simply changing a few pins. Use these tools to move, prep, rip, dig up, transport and haul.

eDingo 500 with 30 inch floor scraper attachment

30" Floor Scraper Attachment (Part # 22673)

Discover the ultimate solution for effortless flooring removal - the Toro 30” Floor Scraper. Crafted with a laser-cut, all-steel construction frame, this tool ensures high performance and durability. At just under 30” width, the floor scraper effortlessly maneuvers through doorways and tight spaces, streamlining your flooring removal tasks.

Operational efficiency is a priority, which is why the frame is specifically designed to allow operators clear visibility of the blade, enhancing precision and effectiveness.

The Toro 30” Floor Scraper tackles any challenge with ease. From vinyl, quarry, and ceramic tiles to carpet squares, paint, glue, and more, no stubborn flooring material stands a chance against its power. Say farewell to tedious and time-consuming removal processes.

High Torque Auger Attachment (Part # 22805)

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo's capability to dig 30" (76.2 cm) holes up to 6' (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Track Loader Auger Attachment (Part # 22806)

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

18" Auger Bit (Part # 22814)

18" auger bit requires auger power head attachment 22805 or 22806.

24" Auger Bit (Part # 22815)

24" auger bit requires auger power head attachment 22805 or 22806.

30" Auger Bit (Part # 22816)

30" auger bit requires auger power head attachment 22805.

12" Auger Extension (Part # 22818)

Add extension to any auger to increase depth.

24" Auger Extension (Part # 22819)

Add extension to any auger to increase depth.

6" Full Flight Auger Bit (Part # 22820)

6" full flight auger bit requires auger power head attachment 22805 or 22806.

9" Full Flight Auger Bit (Part # 22821)

9" full flight auger bit requires auger power head attachment 22805 or 22806.

12" Full Flight Auger Bit (Part # 22822)

12" full flight auger bit requires auger power head attachment 22805 or 22806.

15" Full Flight Auger Bit (Part # 22823)

15" full flight auger bit requires auger power head attachment 22805 or 22806.

Soil Cultivator Attachment (Part # 23102)

The soil cultivator is the ultimate attachment for soil preparation! This incredibly versatile attachment can be used to cultivate and level soil as well as blend landscape materials, compost and fertilizer. This attachment will also bury debris such as stones, soil clods and grass. It transforms rough terrain into a perfect planting bed in one pass.

Concrete Breaker Attachment (Part # 23136)

The Toro® concrete breaker delivers exceptional impact energy, and less parts to service. In addition, the unique design minimizes operator fatigue and environmental impact. For use on Dingo® TX 427, TX 525, TX 700, TX 1000, TX 1300 and e-Dingo models. Not suitable for use with Dingo TXL 2000 models.

Comes standard with Moil Bit (147-1917).

Leveler Attachment (Part # 23165)

This versatile and highly productive tool is a must have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and transporting materials around the job site.

30" Standard Bucket Attachment on the eDingo 500.

30" Standard Bucket (Part # 23174)

The 30" Standard Bucket is a powerhouse when it comes to moving concrete, rock, dirt, sand, or any other materials around the job site. Its slim 30" width allows for easy navigation through doorways and tight spaces, optimizing efficiency.

Designed with a hardened steel cutting edge, this bucket delivers exceptional cutting and digging capabilities, ensuring top-notch performance even in challenging digging conditions. Its superior wear resistance guarantees long-lasting durability.

With a generous capacity of just under 3 cubic feet (0.08 cu. m.), the 30" Standard Bucket is the perfect tool to tackle various material handling tasks on your project.

30" Adjustable Forks Attachment for the eDingo 500.

30” Adjustable Forks Attachment (Part # 23175)

Unlock the full potential of your Dingo system with the Toro Dingo 30” Adjustable Forks. Tailored specifically for the eDingo 500, these forks are the ultimate solution for seamless maneuvering through tight spaces during indoor construction and demolition tasks, elevating your productivity to new heights.

Versatility is the key to success, and these adjustable forks deliver just that. Perfectly suited for a wide range of material handling jobs, effortlessly move debris, pallets, and more around the job site with ease and efficiency. It's like having a reliable roving workstation that effortlessly transports heavy materials without causing fatigue.

Compatible with all Dingo models, except Dingo TXL 2000, our 30” Adjustable Forks are designed to integrate seamlessly with your existing equipment, saving you valuable time and effort.

30" Grapple Bucket attachment for the eDingo 500.

30" Grapple Bucket (Part # 23176)

The 30” Grapple Bucket is designed for contractors looking for a bucket to grab, drag, lift and remove demolition debris and materials on residential, commercial and demolition sites. With its slim 30” width, the bucket effortlessly maneuvers through doorways and tight spaces, streamlining your material handling tasks. Compatible with all Dingo models, except Dingo TXL 2000, our 30” Grapple Bucket is designed to integrate seamlessly with your existing equipment, saving you valuable time and effort.

Power Box Rake Attachment on a Dingo TX 1300 studio shot right side.

Power Box Rake Attachment (Part # 23702)

The Toro Power Box Rake is the perfect tool for seed bed and sod bed preparation. The rotary drum on the power box rake pulverizes rough soil, cuts high spots and fills low spots in one pass; while removing rocks and debris. Pure carbide teeth design produces the best possible seeded sub-soil, which promote superior moisture retention and rapid seed growth.

Red Paint (Gallon) (Part # 361-11)

Genuine OEM Part

Dark Metallic Gray Paint (Part # 361-12)

Genuine OEM Part

PAINT-SPRAY, TORO TEXTURED BLACK (Part # 361-13)

Semi-Gloss Black Paint (Part # 361-9)

Genuine OEM Part

Red Paint (Part # 5340)

Genuine OEM Part

Parts & Manuals

Select your model year from the options below to view parts & manuals.

22230 Serial #
420000000-999999999
418706281-419999999
400000000-418706280

Warranty

For complete product warranty information contact Toro Customer Service

22230 Product Warranty

**See dealer for Warranty details.