Skip to main content

Sign In

4000 Series 52 in. (132 cm) 25.5 hp 852cc

4000 Series 52 in. (132 cm) 25.5 hp 852cc

4000 Series 52 in. (132 cm) 25.5 hp 852cc

Product Information

  • Model #: 74002
  • Serial #: 413000000 - 414067527
  • Product Type: Riding Products

Search for a part within assembly drawings:

Showing Results

Drawing Title Part Number Description
Title



Caster and Wheel Assembly
Caster and Wheel Assembly
Caster Wheel Assembly
Caster Wheel Assembly
Decal Assembly
Decal Assembly
Deck Assembly
Deck Assembly
Deck Decal Assembly No. 144-6587
Deck Decal Assembly No. 144-6587
Deck Lift Assembly
Deck Lift Assembly
Deck Strut Assembly No. 140-1179
Deck Strut Assembly No. 140-1179
Deflector Assembly No. 144-2635
Deflector Assembly No. 144-2635
Electrical Assembly
Electrical Assembly
Engine, Clutch and Muffler Assembly
Engine, Clutch and Muffler Assembly
Frame Assembly
Frame Assembly
Fuel System Assembly
Fuel System Assembly
Fuel Tank Assembly No. 139-6722
Fuel Tank Assembly No. 139-6722
Hydraulic Drive Assembly
Hydraulic Drive Assembly
Idler Arm Assembly No. 139-1087
Idler Arm Assembly No. 139-1087
Left and Right Control Arm Assembly
Left and Right Control Arm Assembly
LH Transaxle Assembly No. 145-3696
LH Transaxle Assembly No. 145-3696
Motion Control Assembly
Motion Control Assembly
Rear Wheel Assembly
Rear Wheel Assembly
RH Transaxle Assembly No. 145-3695
RH Transaxle Assembly No. 145-3695
Roll-Over Protection System Assembly No. 139-8062
Roll-Over Protection System Assembly No. 139-8062
Seat Assembly No. 144-2632
Seat Assembly No. 144-2632
Seat Mount Assembly
Seat Mount Assembly
Spindle Assembly No. 137-9780
Spindle Assembly No. 137-9780
Throttle, Choke Cables and Guard Assembly
Throttle, Choke Cables and Guard Assembly
Wire Harness Assembly No. 139-8078
Wire Harness Assembly No. 139-8078
Download Parts Catalog
Operator's Manual
Service Manual
Parts Catalog
Setup Instructions
Addendum
Product Warranty
Hypr-Oil™ 500 (quart)
Hypr-Oil™ 500 (quart) (Part # 114-4713)
Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.
$16.49 USD
Hypr-Oil™ 500 (gallon)
Hypr-Oil™ 500 (gallon) (Part # 114-4714)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.
$65.99 USD
Genuine OEM Part 114-4715
Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)
Toro Hypr-Oil 500 is a high-performance hydraulic fluid formulated and approved by Toro engineering for commercial zero turn and stand-on mower hydraulic systems. The 5-gallon commercial bulk pack is designed for fleet operators and service shops performing multiple machine hydraulic fluid changes. Maintaining the correct hydraulic fluid on schedule protects pumps, wheel motors, and other hydraulic components from accelerated wear. Refer to your operator manual for the correct change interval and capacity for each machine. Do not mix with other hydraulic fluids.
$294.79 USD
Empty Image Container
KIT, JACK W/ADAPTER (Part # 126-7282)
$262.89 USD
Empty Image Container
KIT, ADAPTER-JACK (Part # 126-7283)
$92.39 USD
Empty Image Container
KIT-STRIPER 48, 52, 60, 72 (Part # 126-7882)
$664.39 USD
Riding Mower Jack Kit
Riding Mower Jack Kit (Part # 127-6666)
This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.
$153.99 USD
Please contact your local dealer
Genuine OEM Part 139-3649
MICHELIN® X® TWEEL® Turf Airless Radial Tires (24") (Part # 139-3649)
A MICHELIN® X® TWEEL® airless radial tire is a single unit that replaces the current tire and wheel assembly. There is no need for complex mounting equipment and once they are bolted on, there is no air pressure to maintain The unique energy transfer within the poly-resin spokes helps reduce the “bounce” associated with pneumatic tires, while providing outstanding handling characteristics. The MICHELIN X TWEEL Turf airless radial tire is a single-unit assembly that replaces a conventional tire and wheel, eliminating the need for air pressure entirely — which means no flats, no downtime, and no patch kits. The wear life of a TWEEL tire is significantly longer than a comparable pneumatic tire, reducing the frequency of replacement and total cost of ownership over time. Verify your model and serial number to confirm the correct size before ordering.
$988.89 USD
Genuine OEM Part 139-6653
52 Inch Recycler Kit (Part # 139-6653)
Recycler Kit, when installed on compatible 42 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. Verify your model and serial number to confirm compatibility before ordering.
$329.99 USD
Genuine OEM Part 140-1242
18 Inch Hi-Flow Blade (Part # 140-1242)
This Toro OEM 18-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
$24.14 USD
Genuine OEM Part 140-4856
18 Inch Medium Flow Mower Blade (Part # 140-4856)
Toro 18 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
$34.64 USD
Genuine OEM Part 140-4857
18 Inch Low Flow Mower Blade (Part # 140-4857)
This Toro OEM 18-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$34.64 USD
Genuine OEM Part 140-4858
18 Inch Atomic Blade (Part # 140-4858)
This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$36.74 USD
Genuine OEM Part 140-4859
18 Inch Recycler Blade (Part # 140-4859)
This Toro OEM 18-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$31.49 USD
Genuine OEM Part 140-1242
Hi-Flow 18 Inch Blade Pack (6) (Part # 140-4882)
This Toro OEM 18-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.
$144.89 USD
Genuine OEM Part 140-4856
Mid Flow 18 Inch Blade Pack (6) (Part # 140-4883)
This Toro OEM 18-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$207.89 USD
Genuine OEM Part 140-4857
Low Flow 18 Inch Blade Pack (6) (Part # 140-4884)
This Toro OEM 18-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$209.99 USD
Atomic 18 Inch Blade Pack (6)
Atomic 18 Inch Blade Pack (6) (Part # 140-4885)
This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$233.09 USD
Genuine OEM Part 140-4886
Recycler 18 Inch Blade Pack (6) (Part # 140-4886)
This Toro OEM 18-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.
$191.09 USD
Empty Image Container
SCREEN-SPARK ARRESTOR (Part # 142-7683)
$29.69 USD
Empty Image Container
TRIMMER MOUNT [4000] (Part # 144-2665)
$208.99 USD
Empty Image Container
JACK MOUNT KIT (Part # 144-2676)
$109.99 USD
Empty Image Container
HARDTOP SUN CANOPY (ARTICULATING) (Part # 144-3719)
$593.99 USD
Empty Image Container
52" CHUTE GATE KIT [4000] (Part # 144-6571)
$563.19 USD
Genuine OEM Part 145-3615
Handle Extension Kit (Part # 145-3615)
Genuine OEM Part
$95.69 USD
Please contact your local dealer
Empty Image Container
KIT-SLOPE SENSOR [2000, 4000] (Part # 145-8442)
$164.99 USD
Please contact your local dealer
Empty Image Container
ASM-VOODOO TRAC 24X10.5-12 [OS -2.25] (Part # 147-5030)
$306.89 USD
Please contact your local dealer
Empty Image Container
BLADE-18.00 HIGH FLOW [.250] (Part # 147-6251)
$30.44 USD
Empty Image Container
6 PACK-BLADE, 18.00 HIGH FLOW [.250] (Part # 147-6255)
$181.64 USD
13
MICHELIN® X® TWEEL® Turf Airless Caster Wheels (13") (Part # 147-6294)
The MICHELIN® X® TWEEL® Turf Caster Wheel is the next “revolution” in commercial mowing. The MICHELIN X TWEEL Turf Caster Wheel has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.
$335.49 USD
Empty Image Container
KIT-BUCKET MOUNT (Part # 147-6345)
$164.99 USD
Empty Image Container
KIT-UNIVERSAL MOUNT (Part # 147-6346)
$384.99 USD
Please contact your local dealer
Empty Image Container
KIT-ELEC DECK LIFT [ZM2000,ZM4000] (Part # 147-7867)
$986.69 USD
Please contact your local dealer
Empty Image Container
KIT-2IN RECIEVER HITCH (Part # 161-2810)
$80.29 USD
Empty Image Container
KIT-ACTUATOR REPLACEMENT,412200557 BELOW (Part # 161-3549)
$669.89 USD
Empty Image Container
KIT-ELEC DECK LIFT, SN 412200557 BELOW (Part # 161-3550)
$1,011.99 USD
Please contact your local dealer
Empty Image Container
KIT-FUEL PICKUP W/SCREEN (Part # 161-6806)
$91.29 USD
Empty Image Container
FRONT LIGHT KIT - 4000 SERIES (Part # 163-7395)
$126.49 USD
Please contact your local dealer
Empty Image Container
REAR WEIGHT KIT [ZM2, ZM4] (Part # 163-7435)
$197.99 USD
Please contact your local dealer
BAGGER KIT, Z MASTER 2000 / 4000 (Part # 78439)
Empty Image Container
4000 Series E-Z Vac Blower & Drive Kit for 52" Deck (Part # 78465)
4000 Series E-Z Vac Blower & Drive Kit for 52" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)
$2,099.00 USD
Please contact your local dealer

Model #

74002

Serial #

413000000 - 414067527

Product Name

4000 Series 52 in. (132 cm) 25.5 hp 852cc

Product Brand

Toro

Product Type

Riding Products

Product Series

Zero Radius Turn, Commercial 4000 Series

Chassis Type

ZRT - LCE

Swath

52 inch / 132 cm

Discharge

Side Discharge

Engine/Motor Manufacturer

Kawasaki

Engine/Motor Size

25.5 hp

Engine/Motor Type

4 Cycle

Engine Starter

Electric

Transmission Type

Hydrostatic

Traction Type

Rear WD

Engine: Battery

12V 300CCA

Engine: Engine Speed

3600±100 RPM

Engine: Spark Plug

NGK BPR4ES

Engine: Spark Plug Gap

.030"/ .76mm

Chassis: Tire Pressure

13 psi / 90 kPa

Engine: Engine Oil Type

filter chg 77 oz.(2.3 L); no filter chg 70 oz.(2.1 L); 10W-30 above -4F(-20C) or 5W-20 below 32F(0C)

Drive System: Ground Speed

0-10 mph / 0-16kph

Chassis: Height of Cut Range

1.5" - 5.5" (38-140mm)

Engine: Ignition Coil Air Gap

0.011in (0.3mm)

Drive System: Gearbox Lubricant

HYPR-OIL 500 / 20w-50 Synthetic Motor Oil