Skip to main content

GrandStand® MULTI FORCE EVO 52 in. (132 cm) 34.5 hp 822cc EFI

GrandStand® MULTI FORCE EVO 52 in. (132 cm) 34.5 hp 822cc EFI

GrandStand® MULTI FORCE EVO 52 in. (132 cm) 34.5 hp 822cc EFI

Product Information

Model #: 72531
Serial #: 422000000 - 999999999
Product Type: Riding Products

Parts

Search for a part within assembly drawings:

Showing Results

Drawing Title	Part Number	Description
Title

52 Inch Deck Assembly

52 Inch Deck Assembly

Control Handle Assembly No. 132-5157

Control Handle Assembly No. 132-5157

Control Handle Assembly No. 132-5158

Control Handle Assembly No. 132-5158

Deck and Decal Assembly No. 139-8097

Deck and Decal Assembly No. 139-8097

Deck Lift Assembly

Deck Lift Assembly

Deflector Assembly No. 163-4031

Deflector Assembly No. 163-4031

Electrical Assembly

Electrical Assembly

Engine Assembly

Engine Assembly

Frame Assembly

Fuel Tank Assembly

Fuel Tank Assembly

Ground Drive Assembly

Ground Drive Assembly

HOC Lever Assembly No. 161-6735

HOC Lever Assembly No. 161-6735

HOC Link Assembly No. 130-6615

HOC Link Assembly No. 130-6615

LH Transmission Assembly No. 161-6674

LH Transmission Assembly No. 161-6674

Low Flow Controller Kit Assembly

Low Flow Controller Kit Assembly

Low Flow Hydraulics Assembly

Low Flow Hydraulics Assembly

Low Flow Manifold Assembly

Low Flow Manifold Assembly

Motion Control Assembly

Motion Control Assembly

Muffler Guard Assembly No. 163-4042

Muffler Guard Assembly No. 163-4042

Overflow Hose Assembly

Overflow Hose Assembly

Parking Brake Assembly

Parking Brake Assembly

Platform Assembly

Platform Assembly

RH Transmission Assembly No. 138-5839

RH Transmission Assembly No. 138-5839

Spindle Assembly No. 137-9780

Spindle Assembly No. 137-9780

Wheel and Bearing Assembly

Wheel and Bearing Assembly

Download Parts Catalog

Manuals

Operator's Manual

Parts Catalog

Product Warranty

ACMA Declaration of Conformity

Accessories (61)

Hypr-Oil™ 500 (quart)

Hypr-Oil™ 500 (quart) (Part # 114-4713)

Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.

Hypr-Oil™ 500 (gallon)

Hypr-Oil™ 500 (gallon) (Part # 114-4714)

Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.

Genuine OEM Part 114-4715

Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)

Toro Hypr-Oil 500 is a high-performance hydraulic fluid formulated and approved by Toro engineering for commercial zero turn and stand-on mower hydraulic systems. The 5-gallon commercial bulk pack is designed for fleet operators and service shops performing multiple machine hydraulic fluid changes. Maintaining the correct hydraulic fluid on schedule protects pumps, wheel motors, and other hydraulic components from accelerated wear. Refer to your operator manual for the correct change interval and capacity for each machine. Do not mix with other hydraulic fluids.

Genuine OEM Part 121-5988

GrandStand Wire Harness Splitter (Part # 121-5988)

This genuine Toro OEM wire harness splitter is designed for GrandStand stand-on mowers and allows multiple electrical accessories — such as light kits and other electronic attachments — to be connected simultaneously to a single power source on the mower. This eliminates the need to disconnect one accessory to connect another and simplifies wiring when running multiple electrical accessories at once. Verify your model and serial number before ordering.

Genuine OEM Part 131-6572

Premium Fuel Treatment (12 oz.) (Part # 131-6572)

Toro Premium Fuel Treatment helps ensure clean, reliable engine performance and protection. Toro Premium Fuel Treatment is designed to protect small 2-cycle and 4-cycle engines from the effects of ethanol-blended fuels, which can degrade over time and leave harmful deposits in carburetors and fuel systems. Using a fuel stabilizer with every fill-up is particularly important for equipment that sits unused for extended periods, such as mowers stored over winter.

Genuine OEM Part 132-7595

GrandStand Speed Setting Tool (Part # 132-7595)

This genuine Toro OEM speed setting tool is designed for GrandStand stand-on mowers and is used to accurately calibrate and adjust the mower's ground speed settings. Correct speed calibration ensures consistent, predictable ground speed response from the drive controls — important both for operator efficiency and for ensuring consistent mowing results across a property. Typically used during initial setup and after drive system service. Verify your model and serial number before ordering.

Genuine OEM Part 133-1436

Roller Stripping Kit (Part # 133-1436)

The Toro Striping Kit allows you to create "ballpark" stripes and patterns in your lawn while you mow. Striping kits lay the grass down in the direction of travel. The Toro OEM striping kit creates defined light and dark stripes in your lawn by pressing grass down in the direction of travel as you mow — the contrast in light reflection produces the 'ballpark' stripe effect. The kit's downward pressure is adjustable, allowing you to vary the intensity of the stripe. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 133-1437

GrandStand Light Kit (Part # 133-1437)

Extend your mowing day with these Toro genuine high-intensity, low amperage LED light kit. This lighting kit is built in durable cast aluminum alloy housing with stainless steel mounting hardware and wiring harness and lighted rocker switch. This Toro OEM LED light kit is designed to extend your working day by providing reliable illumination during low-light mowing conditions. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 133-1438

GrandStand Electric Accessory Port (Part # 133-1438)

Toro OEM electric access port provides an electric outlet to charge small onboard devices. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 133-1439

GrandStand Height of Cut Block Kit (Part # 133-1439)

This genuine Toro OEM height-of-cut block kit is designed for GrandStand stand-on mowers and provides a reference gauge system for setting and verifying consistent cutting height across all blade positions on the deck. Inconsistent deck height across the blade span results in an uneven cut — this kit ensures the deck is correctly levelled and the cutting height is accurate and repeatable after any deck height adjustment. Verify your model and serial number before ordering.

Genuine OEM Part 133-1440

GrandStand Anti-scalp & Wear Bar Kit (Part # 133-1440)

Toro OEM anti-scalp deck wheels and wear bar. These wheels help prevent the deck from coming in contact with the ground when passing over a high spot, thus preventing the blade from slicing off or "scalping" large clumps of grass. Toro OEM anti-scalp deck wheels are designed to prevent the mower deck from making contact with the ground when passing over raised spots or uneven terrain, protecting the blades from impact damage and preventing the lawn from being gouged or stripped. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 133-1441

GrandStand Trimmer Mount Kit (Part # 133-1441)

This genuine Toro OEM trimmer mount kit is designed for GrandStand stand-on mowers and allows the operator to mount a string trimmer directly on the mower — enabling simultaneous mowing and trimming in a single pass. This is particularly valuable for commercial operators looking to improve crew efficiency and reduce the number of passes required on a property. A popular at-purchase accessory for GrandStand owners doing production-oriented mowing work. Verify your model and serial number before ordering.

Genuine OEM Part 133-1457

GrandStand Hydraulic Oil Change Kit (Part # 133-1457)

GrandStand Hydraulic Oil Change Kit contains 2 drain bolts, sealing washer, filter cap, oil cap O ring and filter. Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.

Genuine OEM Part 133-1495

GrandStand Strobe Light Flasher Kit. (Part # 133-1495)

This genuine Toro OEM strobe light flasher kit is designed for Toro GrandStand stand-on mowers and provides a side-mounted strobe light that improves operator visibility in high-traffic, shared-use, or public mowing environments. It is a safety-focused accessory particularly valued by commercial landscape operators working on sports fields, school grounds, and other areas where pedestrian and vehicle traffic is a concern. Verify your model and serial number before ordering.

Empty Image Container

Toro Genuine 5-Gallon bucket. (Part # 133-2533)

This genuine Toro OEM replacement part is manufactured to the exact engineering specifications of your Toro equipment, ensuring correct fit and reliable performance. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 133-5386

GrandStand 1-Wheel Weight Kit (Part # 133-5386)

GrandStand wheel weight kit for Toro Grandstand models. Helps distribute weight for a smooth ride and an even cut on rough terrain. This Toro OEM weight kit helps improve traction and stability on slopes and uneven terrain by adding ballast to the front or rear of your mower. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 136-0513

GrandStand (male end) Quick Attach (Part # 136-0513)

This genuine Toro OEM male-end quick attach fitting is part of the GrandStand MultiForce attachment system. It enables fast, tool-free connection and disconnection of compatible MultiForce attachments — including snow blades, brooms, and aerators — allowing operators to switch between functions quickly without needing additional tools. An essential accessory for any GrandStand operator using the MultiForce attachment system. Verify your model and serial number before ordering.

Genuine OEM Part 136-5420

Hydraulic Cap Lock Kit (Part # 136-5420)

Hydraulic Cap Lock Kit. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 136-8350

GrandStand MultiForce Float Kit (Part # 136-8350)

This genuine Toro OEM float kit is designed for the GrandStand MultiForce attachment system and allows the attachment head to float independently of the mower frame. This enables the attachment to follow ground contours and maintain consistent contact with uneven terrain — particularly important for broom and snow blade applications where consistent surface contact directly affects performance. Verify your model and serial number before ordering.

Genuine OEM Part 137-3920

GrandStand MultiForce Broom Rubber Flap Kit (Part # 137-3920)

This genuine Toro OEM rubber flap kit is designed to replace the rubber deflector flap on the GrandStand MultiForce broom attachment. The rubber flap contains debris during sweeping and is a normal wear item on the MultiForce broom — replacing it when worn restores sweeping performance and prevents debris from being thrown forward or sideways during operation. Verify your model and serial number before ordering.

Genuine OEM Part 139-1529

GrandStand Bagger Enhancement Kit (Part # 139-1529)

This genuine Toro OEM bagging enhancement kit is designed for Toro GrandStand stand-on mowers and improves clipping collection performance in demanding conditions — including heavy or wet grass, thick turf, and autumn leaf bagging. Whether purchased at the same time as a new machine or added as a seasonal upgrade, this kit restores bagger efficiency when standard bagging performance falls short. Verify your model and serial number before ordering.

Genuine OEM Part 139-6653

52 Inch Recycler Kit (Part # 139-6653)

Recycler Kit, when installed on compatible 42 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. Verify your model and serial number to confirm compatibility before ordering.

MICHELIN® X® TWEEL® Turf Airless Radial Tires (18") (Part # 139-7890)

The MICHELIN® X® TWEEL® Turf Airless Radial Tires are the next “revolution” in commercial mowing has arrived. The MICHELIN X TWEEL Turf Airless Radial Tire has all the qualities you would want in a pneumatic tire but it never needs air. The MICHELIN X TWEEL Turf airless radial tire is a single-unit assembly that replaces a conventional tire and wheel, eliminating the need for air pressure entirely — which means no flats, no downtime, and no patch kits. The wear life of a TWEEL tire is significantly longer than a comparable pneumatic tire, reducing the frequency of replacement and total cost of ownership over time. Verify your model and serial number to confirm the correct size before ordering.

Genuine OEM Part 140-1242

18 Inch Hi-Flow Blade (Part # 140-1242)

This Toro OEM 18-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.

GrandStand Snow Tire Kit (2 tires)

GrandStand Snow Tire Kit (2 tires) (Part # 140-4310)

Toro OEM snow tires 20X10X8 provide ideal winter traction for your GrandStand when using winter attachments. Be sure to verify make and serial number to ensure the correct tire. These Toro OEM snow tires are designed to provide reliable traction when operating your GrandStand mower with winter attachments such as snow blades or blowers. Verify your model and serial number to confirm compatibility before ordering.

Genuine OEM Part 140-4856

18 Inch Medium Flow Mower Blade (Part # 140-4856)

Toro 18 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Genuine OEM Part 140-4857

18 Inch Low Flow Mower Blade (Part # 140-4857)

This Toro OEM 18-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Genuine OEM Part 140-4858

18 Inch Atomic Blade (Part # 140-4858)

This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Genuine OEM Part 140-4859

18 Inch Recycler Blade (Part # 140-4859)

This Toro OEM 18-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Genuine OEM Part 140-1242

Hi-Flow 18 Inch Blade Pack (6) (Part # 140-4882)

This Toro OEM 18-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.

Genuine OEM Part 140-4856

Mid Flow 18 Inch Blade Pack (6) (Part # 140-4883)

This Toro OEM 18-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Genuine OEM Part 140-4857

Low Flow 18 Inch Blade Pack (6) (Part # 140-4884)

This Toro OEM 18-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Atomic 18 Inch Blade Pack (6)

Atomic 18 Inch Blade Pack (6) (Part # 140-4885)

This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Genuine OEM Part 140-4886

Recycler 18 Inch Blade Pack (6) (Part # 140-4886)

This Toro OEM 18-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

Genuine OEM Part 144-3842

GrandStand Hydraulic Oil Filter Kit Replacement (Part # 144-3842)

This genuine Toro OEM replacement oil filter removes contaminants — including dirt, metal particles, and other debris — from your engine oil as it circulates, helping to protect critical engine components from wear and extending the life of both the oil and the engine. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your Toro equipment.

Empty Image Container

BLADE-18.00 HIGH FLOW [.250] (Part # 147-6251)

Empty Image Container

6 PACK-BLADE, 18.00 HIGH FLOW [.250] (Part # 147-6255)

Empty Image Container

KIT-CASTER TIRE (11X6.5-5, PNEUMATIC) (Part # 163-7457)

3 Bushell Soft Collection Bag for GrandStand Mowers

3 Bushell Soft Collection Bag for GrandStand Mowers (Part # 30104)

3 Bushell Soft Collection Bag for GrandStand Mowers. To best protect your investment and maintain optimal performance of your equipment, count on Toro genuine parts and accessories.

10W30 4-Cycle Engine Oil - 32 oz. Bottle

10W30 4-Cycle Engine Oil - 32 oz. Bottle (Part # 38280)

The Toro 38280 Premium 4-Cycle Lawn Mower Engine Oil 10W-30 is specially formulated to meet specific 4-cycle engine manufacturer requirements calling for 10W-30. This lawn mower engine oil provides the ultimate protection for all 4-cycle OPE engines. The lawn mower engine oil is developed with Toro engineering to meet the standards for all air-cooled, liquid-cooled and diesel engines. To maximize the performance of your Toro lawn mower, we highly recommend using this Toro lawn mower engine oil, which has been specifically formulated for best results. The lawn mower engine oil provides extreme performance in all temperatures, enhancing the life of your lawn mower's engine.

SAE 30 4-Cycle Lawn Mower Engine Oil 32 oz

SAE 30 4-Cycle Lawn Mower Engine Oil 32 oz (Part # 38903)

Toro SAE 30 4-cycle engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines before you filled your lawn mower. This oil meets or exceeds performance requirements of all OEM engines (Toro, Briggs & Stratton, KOLHER, Honda, and Tecumseh). The use of Toro SAE 30 4-cycle lawn mower oil minimizes molecular shearing for extended life in hot-air-cooled applications vs multi-grades (i.e., 10W-30).

G-STD TWIN BAGGER KIT (Part # 78524)

Empty Image Container

GrandStand E-Z Vac Blower & Drive Kit for 52 in. (132 cm) Deck (Part # 78526)

The patent-pending side-mounted Soft Twin Bagger has a large 10 cu. ft. (8 bushel) (0.28 m3) capacity and the vertically-mounted blower allows for excellent maneuverability in tight spaces and maximum visibility.

Easily Removeable: Bagger frame conveniently removes with three pins and one bolt, while bagger removes simply with one pin and latch.
Compact: The side-mounted bagger offers a smaller width dimension
Side-Mounted: Only stand-on machine with a side bagger to provide maximum visibility and excellent maneuverability
Belt-Driven: The blower/bagger system engages automatically with no additional engine required.

Find a Dealer

MULTI FORCE Pro Force Debris Blower

MULTI FORCE Pro Force Debris Blower (Part # 78593)

The Pro Force Blower has a 360º nozzle rotation and utilizes the MULTI FORCE 26.5 hp Kohler® Command Pro™ EFI engine to deliver tremendous air power for fast removal of grass clippings, leaves, or other debris.

Additional parts required. Low-Flow Hydraulics Kit (Boss) - part # MSC13950

Find a Dealer

MULTI FORCE Power Broom

MULTI FORCE Power Broom (Part # 78596)

NEW 55 in. (139.7 cm) Power Broom designed to tackle sidewalks and clear snow and debris down to the pavement.Additional Parts required. (If you already have the BOSS plow attachment you will only need part # 78601.)

High-Flow Hydraulics Kit (Toro) - part # 78601
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Triangle Attachment Plate (Toro) - part # 136-0513

Find a Dealer

MULTI FORCE MULCH FORCE Mulch Dump

MULTI FORCE MULCH FORCE Mulch Dump (Part # 78597)

You have a job to do, and you want to get it done efficiently. Moving and spreading mulch is no easy task, especially when you use an oldfashioned wheelbarrow. Get with the times – the Toro MULCH FORCE bucket helps you to move nearly twice as much mulch three times as fast per load as using a traditional wheelbarrow. The hydraulically driven MULCH FORCE dump enables you to easily dump the exact amount in tree rings or retainers. This is mulch efficiency at its finest.

Additional parts required.
Low-Flow Hydraulics Kit (Boss) - part # MSC13950

Find a Dealer

GRANDSTAND MULTI FORCE HIGH-FLOW KIT (Part # 78601)

GrandStand® MULTI FORCE Dethatcher (78690)

MULTI FORCE Dethatcher (Part # 78690)

Turn your Toro Grandstand Multi-Force into the ultimate spring clean-up tool with Multi-Force front-mount Tine Rake Dethatcher. Use the rake for the first mowing of the spring to remove thatch, embedded leaves and debris. The patented tines lift thatch without damaging healthy turfgrass. And comb matted grass gives the lawn a clean, hand-raked appearance.

Find a Dealer

DETHATCHER MOUNT, MULTI-FORCE (Part # 78691)

MULTI FORCE Aerator

MULTI FORCE Aerator (Part # 78694)

Transform your Grandstand Multi-Force into an aerator with the 38-inch wide Multi-Force Hooker Aerator. You'll finish jobs faster than ever, as the aerator punctures up to six holes per square foot. Holes are approximately 1/2 in. wide by 1-1/4 in. long and up to 3 in. deep. Tines pierce deep into the soil, hooking and lifting loose plugs of dirt that disperse quickly, spreading nutrients over the surface. No unsightly hard plugs accumulate on the lawn. The lifting action of the tines prevents soil compaction that is common with hollow tine aerators and allows good filtration of air and water into the lawn.

Find a Dealer

AERATOR MOUNT, MULTI-FORCE (Part # 78695)

MULTI FORCE Leaf Plow

MULTI FORCE Leaf Plow (Part # 78697)

The heavy-duty GrandStand MULTI FORCE Leaf Blade Plow attachment uses the mower's power to quickly move piles of leaves. It virtually eliminates in.tarping in. and moves windrowed leaves for collection. The one-piece, 55 in. (139.7 cm) wide galvanized steel blade has supports at the top, center and bottom for durability. The Leaf Blade rides on two adjustable caster wheels. Flat 4.5 in. (11.4 cm) long stainless spring steel tines allow the Plow to push leaves on uneven surfaces without damaging turfgrass. The Leaf Blade may be folded up over the deck to reduce space on the trailer.

Additional Parts required.
Leaf Plow Mount (Toro) - part # 78698

Find a Dealer

LEAF PLOW MOUNT ONLY, MULTI-FORCE (Part # 78698)

KIT-SNOW DEFLECTOR, HTX (Part # MSC04587C)

PLOW SHOE KIT (Part # MSC13040)

BLADE EXTENSION KIT,6IN,STB (Part # MSC13850B)

GrandStand Plow Kit (Part # MSC13960)

KIT-PLOW SIDE,4'0"STB,GRANDSTAND (Part # MSC14780)

5'0

5'0" ATV Poly Straight-Blade Crate (Part # STB13567B)

The 5’ Poly Straight Blade Compact Vehicle Plow is engineered for sidewalks, pathways, and hard-to-reach areas, delivering BOSS-grade performance in a compact, agile package. Designed for mid-size UTVs, ATVs, and select Toro units, it tackles tight spaces and rough terrain with ease, making winter maintenance faster and more efficient. Unlike traditional chain and pulley setups, the BOSS hydraulic system eliminates winches, chains, and pulleys—reducing maintenance and corrosion while ensuring reliable operation in any condition. Constructed from high-performance Polyurethane with ultraviolet stabilizers, the plow retains its sleek, vibrant appearance season after season. It combines the toughness of steel with the smooth performance of stainless steel. Equipped with a full moldboard trip design, the 5’ Poly Straight Blade protects your equipment by allowing the entire blade to trip forward when encountering obstacles. This system absorbs impact, minimizes damage, and ensures you can confidently move through any storm.

BOSS® Plow Blade attachment for the Toro GrandStand MULTI FORCE. Additional Parts required:
Grandstand MULTI FORCE plow side kit - part # MSC23000

BOSS® Plow Blade attachment for the Toro Dingo. Additional Parts required.
BOSS 5’ plow side kit - part #MSC13960

Where to Buy

4'0

4'0" ATV Poly Straight-Blade Crate (Part # STB13759B)

The 4’ Poly Straight Blade Compact Vehicle Plow is engineered for sidewalks, pathways, and hard-to-reach areas, delivering BOSS-grade performance in a compact, agile package. Designed for ATVs and select Toro units, it easily tackles tight spaces and rough terrain, making winter maintenance more efficient. Unlike traditional chain and pulley setups, the BOSS hydraulic system eliminates winches, chains, and pulleys, reducing maintenance and corrosion. Constructed from high-performance Polyurethane with ultraviolet stabilizers, the plow maintains its sleek, vibrant appearance season after season, combining the toughness of steel with the smooth performance of stainless steel. Equipped with a full moldboard trip design, the 4’ Poly Straight Blade protects your equipment by allowing the entire blade to trip forward when encountering obstacles. This system absorbs impact, minimizes damage, and ensures you power through any storm with confidence. BOSS® Plow Blade attachment for the Toro GrandStand MULTI FORCE.
Additional Parts required.
Grandstand MULTI FORCE plow side kit - part # MSC23000BOSS® Plow Blade attachment for the Toro Dingo.
Additional Parts required.
BOSS 4’ plow side kit - part #MSC14780

Where to Buy

Plow Urethane Edge Kit (Part # STB13801)

Product Details

Model #

72531

Serial #

422000000 - 999999999

Product Name

GrandStand® MULTI FORCE EVO 52 in. (132 cm) 34.5 hp 822cc EFI

Product Brand

Toro

Product Type

Riding Products