MSRP: 1,099.00 USD

Buy Online

  • Powered by a Toro Premium 252cc OHV 4-cycle, it's ideal for concrete, asphalt or gravel surfaces that can park up to 4 - 10 cars and 6 - 12" (15-31 cm) of snow at a time
  • 26” (66 cm) Clearing Width, 20” (51 cm) intake height, Up to 45’ (13.5 m) Throw Distance
  • All Steel Construction - the housing, frame, ACS, and chute are 100% steel construction, meaning this snow blower is built to last
  • Automatic steering - allows for smooth, tight turning without pulling or strain

The Power Max 826 OXE with Toro Premium 252cc OHV 4-cycle engine provides proven power and performance to make your job easier in tough winter conditions. Throws snow up to 45’ (13.5 m) feet away with a 26” (66 cm) clearing width and 20” (51 cm) intake height. Ideal for concrete, asphalt or gravel surfaces that can park up to 4 - 10 cars and 6 - 12" (15-31 cm) of snow at a time.

Everything from the housing, frame, ACS, and chute are 100% steel construction, meaning this snow blower is built to last. All new double deflector provides wider range of throw, from right next to a fence or far as the operator needs. Automatic steering makes turning easier and convenient one-hand levers allow single-handed operation freeing the other hand to change speeds or the chute control without stopping. Easily change the chute direction and angle with the Quick Stick® chute control.

A breakthrough in snow blowing technology, the exclusive Anti-Clogging System meters snow intake to prevent clogging and maximize clearing efficiency. The Heavy-Duty Auger Gearbox has special oversized hardened gears and shafts designed to withstand extreme stress. No shear pins needed! If the auger hits hard material, the engine will stall to prevent damage.

Choose the right fuel for your snowblower. For best starting results use Non-ethanol fuel with an octane rating of 87 or higher. Use fresh fuel less than 30 days old, add fuel stabilizer to reduce starting problems. Do not mix oil with gas. For more information, view our Fuel Fact Tips.

View Larger
Powerful Engines

Smooth Toro 252 cc 4-cycle OHV engines have been tuned specifically for these models to deliver powerful, responsive performance.

View Larger
Automatic Steering

Allows smooth, tight turning without pulling or strain – no triggers or levers required.

View Larger
LED Headlight

See and be seen with a bright LED light.

View Larger
Electric Start

For hot starts on the coldest days, each Toro two-stage snowthrower comes equipped with both electric start and a recoil mitten grip start for added peace of mind.

View Larger
Steel Chute

The 100% steel chute construction means this snow blower is built to last. (Select models only.)

View Larger
Anti-Clogging System (ACS)

The only system to allow the impeller to automatically reroute excess snow away from the chute and back into the auger to reduce clogging.

View Larger
High-Strength Auger Gear Box

Special, hardened gears are designed to withstand the highest of stresses and provide worry-free performance — no shear pins needed.

View Larger
Quick Stick® Chute Control

Reinforced with metal rod, innovative joystick control changes chute direction on the go.

  • Auger System
    Anti-Clogging System (ACS), 11” / 28 cm Dia., Hardened Gears; no shear pins needed
  • Chute Control
    Quick Stick® (200˚ Rotation), Steel, Double Deflector
  • Clearing Width
    26” (66 cm) clearing width, 20” (51 cm) intake height
  • Drive System
    Friction Disk
  • Engine
    Toro Premium 252cc OHV 4-cycle
  • Engine Displacement
    252cc
  • Fuel Capacity
    3.1 Quarts (3.0 L)
  • Lighting
    LED Headlight Standard
  • One-Hand Interlock
    Standard
  • Scraper
    Adjustable
  • Skid Shoes
    Standard
  • Speeds
    6 Fwd. / 2 Rev.
  • Starter
    Electric Start
  • Throw Distance
    Up to 45’ (13.5 m)*
  • Tires
    15" x 5" (38 cm x 13 cm)
  • Warranty
    3-Year Limited**
    Guaranteed for Life Warranty** - ACS only (Original owner only)
  • Weight
    180 lbs. / 81 kg
  • Disclaimer
    *Capacity and throw distance will vary with conditions.
    **See retailer for warranty details. Specifications subject to change without notice and without incurring obligation.
View Larger
Weight Kit (Part # 107-3815)

Provides balance for snowthrower when additional weight of snow cab is added as an option.

View Larger
Snow Cab (Part # 127-5960)

Heavy-duty vinyl with clear, freeze resistant windows protects you from the wind and snow. Weight kit (part number 107-3815) is needed when using Snow Cab.

View Larger
Non-Marking Poly Skids (Part # 38211)

Protect your driveway and sidewalk surfaces by using these non-marking poly skids. Reversible for double the life.

View Larger
Heavy-Duty Cast Iron Skids (Part # 38212)

Designed to be .5" thick for maximum life. The added weight on the front helps to chew through deep snow piles. Reversible for double the life. (includes 2 skids (part # 120-3098-03) and hardware)

View Larger
Drift Breaker (Part # 38213)

Knocks down large drifts, allowing auger to collect and throw deep snow. Available as an option on all Toro two stage snowthrowers.

View Larger
Two-Stage Cover (Part # 490-7466)

Protect your investment with a snowthrower cover made of heavy-duty polyester that's waterproof, abrasion, and tear resistant. This cover is vented to promote air circulation and minimize heat and moisture build-up.

Select your serial number range from the options below to view parts & manuals.

Serial #
400000000-999999999