Professional 4000 Series MyRIDE® HDX Petrol Z Master® 132 cm 74053TE

Higher, Smoother Ride

Model: 74053TE
UPC/EAN: 9310317740539

Survey the task from a higher-vantage-point with the 26" Voodoo Trac™ drive tires.
Powerful illumination for after-hours work with LED headlights.
Go full throttle and have confidence in the precise cut from our TURBO FORCE® deck with I-beam front end paired with tubular chassis and bumper.
Keep your phone and drink at arm's reach.
Keep tabs on time and keep devices powered up with the hour meter and USB ports.
Save your body from the toughest terrain with the MyRIDE Suspension System featuring up to 3 inches of travel.

Not Returnable

Top

Overview

Give comfort and visibility a lift with the Toro Professional Z Master® 4000 Series MyRide® HDX Petrol Mower. The MyRide Suspension System provides up to three extra inches of travel to isolate bumps and vibrations, and the 26” Voodoo Trac™ drive tires give you a higher vantage point for superior visibility. Count on the powerful Kawasaki® FX801V engine, commercial-grade hydros and wide 132cm TURBO FORCE® cutting deck for quality performance and years of service. And count on the smooth ride, USB ports, phone holder and cup holder for all-day comfort.

Features

26" Voodoo Trac™ Drive Tires

Get the ultimate in agressive tread and styling and survey the task from a higher-vantage-point with 26" Voodoo Trac™ Drive Tires.

LED Headlights

Powerful illumination for after-hours work.

Up to 12 MPH

Get more done with ground speeds up to 12 MPH without reducing cut quality.

TURBO FORCE® Cutting Deck

Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.

Rubber Discharge Chute

Trim close without damaging landscape structures or your chute.

Deck Step Plate

Keep your grip and remove excess mud from your shoes with a deck step plate.

Dual Capture Anti-Scalp Rollers

Intelligently engineered dual capture anti-scalp rollers ensure the highest quality of cut in the harshest terrain you can throw at it.

Phone and Cup Holder

Keep your phone and drink at arm's reach with built-in phone and cup holders.

USB Ports

USB ports to help you stay charged on the job.

Clear Sightline to Rear Tires

Clear sightline to rear tires for enhanced control so you can clear a path without tire spin.

MyRIDE® Suspension System

Save your body from the toughest terrain with the MyRIDE Suspension System.

Electronic Deck Lift Assist

Electronic deck lift assist in dialing in your desired cut height.

Specifications

Air Filter	Heavy-Duty Donaldson® Canister-Style Air Cleaner
Blade Tip Speed	5,638 m/min
Blades	.5 cm Heat-Treated Steel
Caster Tires	38 x 16.5 – 15.2 cm Pneumatic
Clutch	Electromagnetic
Comfort Platform	MyRIDE^® Suspension System
Deck Design	132.1 cm 7-Gauge High-Strength Steel TURBO FORCE®
Deck Material	7 Gauge High-Strength Steel
Deck Size	52 in / 132 cm
Discharge Chute	Rubber
Drive Tires	Voodoo Trac ™ 66 x 26.7 – 30.5 cm
Engine	25.5 hp* Kawasaki FX801V (852cc) with Heavy-Duty Donaldson® Canister-Style Air Cleaner
Engine Brand	Kawasaki
Engine Displacement (cc)	852 cc
Engine Horsepower	25.5 hp
Engine Power (kW)	19 kW
Foot Operated Height of Cut	Hydraulic with Rocker Switch
Forward Ground/Transport Speed	Up to 19.3 kph
Fuel Capacity	37.8 L
Fuel Type	Gasoline
Hour Meter	Standard
Ignition	Electric
Lighting	LED Headlights
Number of Blades	3
Product Features	Deluxe Seat, Electric Start, Gas Powered, Hour Meter
Product Type	Zero Turn Mowers
Roll-Over Protection System (ROPS)	Folding; Standard
Seat	Deluxe Suspension Seat
Shocks	1 Front Center / 2 Rear
Spindle Bearings	Maintenance-free
Spindle Housing	22.9 cm Diameter Cast Aluminum
Start Type	Electric
Steering Controls	1.4" (3.6 cm) Diameter Grips; Adjustable, Dampened
Transmission	ZT-4400 Integrated Pumps & Wheel Motors

Accessories

Road Lights Kit (Part # 02936)

Hypr-Oil™ 500 (quart) (Part # 114-4713)

$16.49 USD

Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.

$16.49 USD

Hypr-Oil™ 500 (gallon) (Part # 114-4714)

$65.99 USD

Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.

$65.99 USD

Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)

$294.79 USD

Toro Hypr-Oil 500 is a high-performance hydraulic fluid formulated and approved by Toro engineering for commercial zero turn and stand-on mower hydraulic systems. The 5-gallon commercial bulk pack is designed for fleet operators and service shops performing multiple machine hydraulic fluid changes. Maintaining the correct hydraulic fluid on schedule protects pumps, wheel motors, and other hydraulic components from accelerated wear. Refer to your operator manual for the correct change interval and capacity for each machine. Do not mix with other hydraulic fluids.

$294.79 USD

KIT, JACK W/ADAPTER (Part # 126-7282)

$262.89 USD

KIT, ADAPTER-JACK (Part # 126-7283)

$92.39 USD

KIT-STRIPER 48, 52, 60, 72 (Part # 126-7882)

$635.79 USD

Please contact your local dealer

Riding Mower Jack Kit (Part # 127-6666)

$156.19 USD

This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.

$156.19 USD

Single Side Mirror Kit (Part # 134-8275)

Shock/Spring ASM (Part # 136-8993)

$189.19 USD

Toro riding mower suspension systems are engineered with carefully selected components that work together to provide you with a smooth ride on uneven turf. The cutting deck of the mower works in conjunction with the suspension system to provide a consistent quality of cut. Verify your model and serial number to confirm compatibility before ordering.

$189.19 USD

52 Inch Recycler Kit (Part # 139-6653)

$434.49 USD

Recycler Kit, when installed on compatible 42 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. Verify your model and serial number to confirm compatibility before ordering.

$434.49 USD

Please contact your local dealer

18 Inch Hi-Flow Blade (Part # 140-1242)

$28.34 USD

This Toro OEM 18-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.

$28.34 USD

18 Inch Medium Flow Mower Blade (Part # 140-4856)

$34.64 USD

Toro 18 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$34.64 USD

18 Inch Low Flow Mower Blade (Part # 140-4857)

$34.64 USD

This Toro OEM 18-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$34.64 USD

18 Inch Atomic Blade (Part # 140-4858)

$38.84 USD

This Toro OEM 18-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$38.84 USD

18 Inch Recycler Blade (Part # 140-4859)

$31.49 USD

This Toro OEM 18-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$31.49 USD

Hi-Flow 18 Inch Blade Pack (6) (Part # 140-4882)

$169.04 USD

This Toro OEM 18-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.

$169.04 USD

Mid Flow 18 Inch Blade Pack (6) (Part # 140-4883)

$207.89 USD

This Toro OEM 18-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$207.89 USD

Low Flow 18 Inch Blade Pack (6) (Part # 140-4884)

$207.89 USD

This Toro OEM 18-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$207.89 USD

Atomic 18 Inch Blade Pack (6) (Part # 140-4885)

$233.09 USD

Recycler 18 Inch Blade Pack (6) (Part # 140-4886)

$187.94 USD

This Toro OEM 18-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$187.94 USD

SCREEN-SPARK ARRESTOR (Part # 142-7683)

$29.69 USD

TRIMMER MOUNT [4000] (Part # 144-2665)

$212.29 USD

Please contact your local dealer

JACK MOUNT KIT (Part # 144-2676)

$115.49 USD

Please contact your local dealer

HARDTOP SUN CANOPY (ARTICULATING) (Part # 144-3719)

$587.39 USD

Please contact your local dealer

52" CHUTE GATE KIT [4000] (Part # 144-6571)

$538.99 USD

52 CE COMPLIANCE KIT [4000] (Part # 145-1262)

$580.79 USD

Semi Pneumatic Assembly 15 x 6.50-6 (Part # 145-1919)

$309.09 USD

This genuine Toro OEM 15 x 6.50-6 semi-pneumatic wheel assembly is a direct replacement for compatible Toro riding mowers and zero turn mowers. Semi-pneumatic wheels have a foam-filled or solid tire that provides ride quality similar to a pneumatic tire without the risk of puncture or pressure maintenance. Replace when the existing wheel is cracked, warped, or showing structural damage. Verify your model and serial number before ordering.

$309.09 USD

Please contact your local dealer

Handle Extension Kit (Part # 145-3615)

$91.29 USD

Genuine OEM Part

$91.29 USD

MICHELIN® X® TWEEL® Turf Airless Radial Tires (26") (Part # 147-4600)

$1,086.79 USD

The MICHELIN® X® TWEEL® Turf Airless Radial Tires are the next “revolution” in commercial mowing has arrived. The MICHELIN X TWEEL Turf Airless Radial Tire has all the qualities you would want in a pneumatic tire but it never needs air. The MICHELIN X TWEEL Turf airless radial tire is a single-unit assembly that replaces a conventional tire and wheel, eliminating the need for air pressure entirely — which means no flats, no downtime, and no patch kits. The wear life of a TWEEL tire is significantly longer than a comparable pneumatic tire, reducing the frequency of replacement and total cost of ownership over time. Verify your model and serial number to confirm the correct size before ordering.

$1,086.79 USD

BLADE-18.00 HIGH FLOW [.250] (Part # 147-6251)

$30.44 USD

6 PACK-BLADE, 18.00 HIGH FLOW [.250] (Part # 147-6255)

$181.64 USD

MICHELIN® X® TWEEL® Turf Airless Caster Wheels (15") (Part # 147-6337)

$387.19 USD

The MICHELIN® X® TWEEL® Turf Caster Wheel is the next “revolution” in commercial mowing. The MICHELIN X TWEEL Turf Caster Wheel has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.

$387.19 USD

BAGGER KIT, Z MASTER 2000 / 4000 (Part # 78439)

4000 Series E-Z Vac Blower & Drive Kit for 52" Deck (Part # 78465)

$2,099.00 USD

4000 Series E-Z Vac Blower & Drive Kit for 52" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)

$2,099.00 USD

Please contact your local dealer

Parts & Manuals

Select your model year from the options below to view parts & manuals.

74053TE Serial #
420900000-999999999
420000000-420899999
418626907-419999999
418030533-418626906
418030505-418030532
416400000-418030504
416200000-416399999
415100000-416199999
414387044-415099999
414324427-414387043
414324375-414324426
414071898-414324374
413000000-414071897
412200230-412999999
411435668-412200229
410170000-411435667
409854706-410169999
408914114-409854705
400000000-408914113

Warranty

For complete product warranty information contact Toro Customer Service

74053TE Product Warranty

**See dealer for Warranty details.