Commercial Walk-Behind Mower, Floating Deck, Split Lever, Hydro Drive with 48in TURBO FORCE Cutting Unit
Product Information
- Model #: 30488
- Serial #: 400000000 - 999999999
- Product Type: Walk Behind Mowers
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Operator's Manual
-
Parts Catalog
-
Setup Instructions
16.5 Low Flow Blade (Part # 107-3193-03)
Toro 16.5 Inch OEM Low Flow blade. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
16.5 Medium Flow Blade (Part # 107-3194-03)
Toro 16.5 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
16.5 Atomic Blade (Part # 107-3195-03)
Toro 16.5 Inch OEM Atomic blade. The Toro Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
16.5 Inch Recycler Blade (Part # 107-3196-03)
Toro 16.5 Inch OEM Recycler blade. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
48 inch GrandStand bagging Enhancement Kit (Part # 108-4091)
Toro 48 inch GrandStand bagging Enhancement Kit. This genuine Toro OEM bagging enhancement kit is designed to improve clipping collection performance in demanding conditions such as heavy or wet grass and autumn leaf bagging. Refer to your operator manual for installation instructions and compatible models.
Please contact your local dealer
Hi-Flow Blade Pack (6) (Part # 110-0414)
Toro 16.5 Inch OEM Hi-Flow blade pack. (6) Hi-Flow blades. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Low Flow 16.5 Inch Blade Pack (6) (Part # 110-0415)
Toro 16.5 Inch OEM Low Flow blade pack. (6) Low Flow blades. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Recycler 16.6 Inch Blade Pack (6) (Part # 110-0416)
Toro 16.5 Inch OEM Recycler blade pack. (6) Recycler blades. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Atomic 16.5 Inch Blade Pack (6) (Part # 110-0417)
Toro OEM Atomic blade pack. (6) 16.5 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
Mid Flow 16.5 Inch Blade Pack (6) (Part # 110-0418)
Toro 16.5 Inch OEM Medium Flow blade pack. (6) Medium Flow blades. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.
48 Inch Recycler Kit (Part # 110-2060)
Genuine OEM Part
Please contact your local dealer
GrandStand 15 lbs Cast Weight (Part # 112-7059-01)
This genuine Toro OEM 15 lbs cast weight kit is designed for Toro GrandStand stand-on mowers and adds ballast to improve front traction and stability when mowing slopes, hills, and uneven ground. Insufficient front weight on a stand-on mower can cause the front caster wheels to lose contact with the ground on steep terrain, reducing steering control. Adding a weight kit is one of the most practical at-purchase accessories for operators who regularly mow on sloped properties. Verify your model and serial number before ordering.
Midsize Weight Kit (Part # 112-9971)
Genuine OEM Parts
Anti-Scalp Kit (Trim Side) (Part # 115-1015)
Genuine OEM Part
Anti-Scalp Kit (Part # 115-1016)
Genuine OEM Parts
48/52/60 Inch Midsize Chute Gate Kit (Part # 115-4195)
Genuine OEM Part
*OBS* Toro full synthetic 10W-30 engine oil (Part # 117-0066)
Toro full synthetic 10W-30 engine oil. The easy engine oil choice for any outdoor power equipment
to increase performance and reliability.
Oil Filter Replacement (Part # 119-5852)
This genuine Toro OEM replacement oil filter removes contaminants — including dirt, metal particles, and other debris — from your engine oil as it circulates, helping to protect critical engine components from wear and extending the life of both the oil and the engine. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your Toro equipment.
Fuel Filter Replacement (Part # 120-2235)
This genuine Toro OEM replacement fuel filter prevents dust, water, and fuel contaminants from reaching the engine's carburetor or fuel injection system, protecting cylinders, pistons, and other components that would otherwise require costly repair. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your equipment.
Air Filter Element - Primary Replacement (Part # 120-7447)
This genuine Toro OEM replacement air filter is your engine's first line of defense against the dirt and debris that is thrown up during mowing. When functioning correctly, the air filter prevents particles from reaching the carburetor and entering the engine, protecting cylinders, pistons, and other internal components from accelerated wear. Refer to your operator manual for recommended replacement intervals and to confirm compatibility with your equipment.
3 Bushell Soft Collection Bag for GrandStand Mowers (Part # 30104)
3 Bushell Soft Collection Bag for GrandStand Mowers. To best protect your investment and maintain optimal performance of your equipment, count on Toro genuine parts and accessories.
Please contact your local dealer
Please contact your local dealer
SAE 30 4-Cycle Lawn Mower Engine Oil 32 oz (Part # 38903)
Toro SAE 30 4-cycle engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines before you filled your lawn mower. This oil meets or exceeds performance requirements of all OEM engines (Toro, Briggs & Stratton, KOLHER, Honda, and Tecumseh). The use of Toro SAE 30 4-cycle lawn mower oil minimizes molecular shearing for extended life in hot-air-cooled applications vs multi-grades (i.e., 10W-30).
Spark Plug Replacement (Part # 92-2153)
This genuine Toro OEM replacement spark plug is engineered to the exact specifications of your Toro equipment's engine, ensuring reliable ignition, consistent combustion, and peak engine performance. A worn or fouled spark plug is one of the most common causes of hard starting, rough idling, and reduced fuel efficiency in small engines. Refer to your operator manual for recommended replacement intervals and to confirm the correct plug for your model.
-
Model #
30488 -
Serial #
400000000 - 999999999 -
Product Name
Commercial Walk-Behind Mower, Floating Deck, Split Lever, Hydro Drive with 48in TURBO FORCE Cutting Unit -
Product Brand
Toro -
Product Type
Walk Behind Mowers -
Product Series
Mid-Size ProLine Mower -
Chassis Type
Mid-size - Floating Deck -
Swath
48 inch -
Discharge
Side -
Engine/Motor Manufacturer
Kawasaki -
Engine/Motor Size
18.5 hp -
Engine/Motor Type
4 Cycle -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
2wd
-
Drive System: Ground Speed
Fwd. 0 - 6.0 Rev. 0 - 2.5 mph -
Engine: Battery
12V 300CCA -
Engine: Engine Speed
3600±100 RPM -
Engine: Spark Plug
NGK BPR4ES -
Engine: Spark Plug Gap
.030"/ .76mm -
Engine: Ignition Coil Air Gap
.008-.016" / .2-.4mm -
Chassis: Height of Cut Range
1-4.5", 1/4" increments -
Chassis: Tire Pressure
12-14 psi rear -
Engine: Engine Oil Type
67 oz. (2.1 Liter) SAE 10W-30 or 10W-40 -
Drive System: Gearbox Lubricant
HYPR-OIL 500 / 15w-50 Synthetic Motor Oil