• Flex suspension allows the cutting unit to easily follow the contours of the green and delivers a superior quality of cut.
  • Changing cutting units is simple with the tool-free quick-change levers. Easily swap out cutting units in seconds and minimize maintenance downtime.
  • Battery capacity with ample power and run time to mow up to 44,000 sq-ft (over 4000 sq-meters). Balanced battery management and on-board electronics monitor the mower to automatically optimize battery life.
  • All operator controls are within easy reach to perfect the mowing process, improve cut consistency, and enhance control – in normal and tight turn-around situations.
  • Engineered to accommodate operators of different heights, for mowing in a natural upright position. Leads to less fatigue and a superior cut. Adjustable to 5 distinct handle positions.
  • Two rubber grommets eliminate minor oscillations in Height-of-Cut caused by walking strides. Delivers a consistent cutting height on each and every green for optimal playability.
  • Convenient, easy to reach location to engage reel from the operator position.
  • Provides long life and best-in-class transmission durability. Lubricated for life, no grease points.
  • A single bail combines safety and ease-of-operation. Convenient operation allows the mower to slow down or come to a full stop during turn-arounds without disengaging traction to line up for next mowing pass. Also ideal when using turn-around mats to preserve collar health.
  • Clip frequency can easily be changed in the field to mow the perimeter, collars etc. The quick-change feature also can be locked out for added control.
  • Disengage the traction with a simple lever twist. Getting around the shop has never been easier!
  • Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.

Overview

Extremely quiet, the all-electric Toro® Greensmaster eFlex1021 is among the quietest and most efficient walk greensmowers on the market today. Harnessing the power of lithium-ion battery technology, this mower take electrical efficiency to a new level, allowing operators to mow up to 44,000 sq. ft.* of turf on a single charge. Additionally, a convenient LCD screen indicates an ongoing battery charge status and also displays useful information such as machine hours, diagnostics, and overall battery health. This unit is designed for minimal maintenace and long, productive life saving labor and operational costs.

Features

Patented Flex Suspension Technology
Patented Flex Suspension Technology
Flex suspension allows the cutting unit to easily follow the contours of the green and delivers a superior quality of cut.
Tool-free Cutting Unit Removal
Tool-free Cutting Unit Removal
Changing cutting units is simple with the tool-free quick-change levers. Easily swap out cutting units in seconds and minimize maintenance downtime.
Proven Lithium-Ion Technology
Proven Lithium-Ion Technology
Battery capacity with ample power and run time to mow up to 44,000 sq-ft (over 4000 sq-meters). Balanced battery management and on-board electronics monitor the mower to automatically optimize battery life.
Easy-Reach Adjustable Throttle
Easy-Reach Adjustable Throttle
All operator controls are within easy reach to perfect the mowing process, improve cut consistency, and enhance control – in normal and tight turn-around situations.
Telescoping Handle
Telescoping Handle
Engineered to accommodate operators of different heights, for mowing in a natural upright position. Leads to less fatigue and a superior cut. Adjustable to 5 distinct handle positions.
Handle Isolation Mounts
Handle Isolation Mounts
Two rubber grommets eliminate minor oscillations in Height-of-Cut caused by walking strides. Delivers a consistent cutting height on each and every green for optimal playability.
Reel Engagement Lever
Reel Engagement Lever
Convenient, easy to reach location to engage reel from the operator position.
Durable Gear Drive Transmission
Durable Gear Drive Transmission
Provides long life and best-in-class transmission durability. Lubricated for life, no grease points.
Dual Function Bail
Dual Function Bail
A single bail combines safety and ease-of-operation. Convenient operation allows the mower to slow down or come to a full stop during turn-arounds without disengaging traction to line up for next mowing pass. Also ideal when using turn-around mats to preserve collar health.
Hi-Lo Clip Rate Knob
Hi-Lo Clip Rate Knob
Clip frequency can easily be changed in the field to mow the perimeter, collars etc. The quick-change feature also can be locked out for added control.
Traction Release Lever
Traction Release Lever
Disengage the traction with a simple lever twist. Getting around the shop has never been easier!
EdgeSeries™ Reels
EdgeSeries™ Reels
Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.
Watch the Video

Specifications

Blade Style/Type Reel
Blade Type (Description) EdgeSeries™ DPA radial reels.
Charger

Voltage and current controlled with CAN communication to manage battery health. Complies to max voltage and current limits directed by the battery management system. Off-board high efficiency 650W smart charger.

  • AC input voltage 100-240VAC
  • AC input Frequency 50/60 Hz
  • Max input Current 7.5 A
  • Max charge time, empty to full: 4 hrs.
Clip Frequency/Backlapping Quick-change dual-speed gear drive, combined with positive drive belt - four possible reel speed/clip settings. Standard backlapping.
Collection System Volume Molded polyethylene with integrated graphics highlighting overlap guidelines, vented for high-efficiency collection.
Controls Start/On/Off (‘ignition’) switch, LCD Information Center (reports multiple parameters including hours, battery life, faults, diagnostics, backlap control, etc.) throttle, dual function traction/safety bail, reel engage lever, service/parking brake lever, optional light switch.
Cutting Unit Accessories 11, 14-Blade Flex ES Cutting Unit, Front and Rear Roller Options, Bedknife Options, Groomer Options, Scraper Options, Tools and Maintenance Options.
Cutting Unit Suspension Flex
Cutting Unit Type/Configuration Semi-floating cutting unit separable from drive unit, pivoting around reel centerline (pitch axis) and pivoting around bedknife centerline side to side (roll axis).
Drivetrain Electric
Fuel / Power Source Electric
Ground Speed - Forward 0 - 5.3 mph (0 - 8.5 km/h)
Handle Loop handle with telescoping adjustment of 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing.
Height of Cut Range For Greens: (Spacer Position One) 0.062" - 0.250" (1.5 mm - 6 mm) For Tees: (Spacer Position Two) 0.125" - 0.375" (3 mm - 9 mm) High Height of Cut Kit: 0.375" - 1.00" (9 mm - 25 mm)
Kickstand Standard
Main Frame/Chassis Fully modular design allows quick disassembly for service/maintenance of all major components.
Mowing Speed 2.0 - 3.5 mph (3.2 - 5.6 km/h)
Number of Blades 11, 14
Optional Accessories LED Light Kit, Cutting Unit Light Kit Mount, Push Broom Kit, Wheel Kit, Backlap Access Kit, Wireless Hour Meter, High Height of Cut Kit, Charger, Replacement Battery
Parking/Service Brakes Service/parking - band type.
Power Train (Engine Description) Lithium-Ion battery pack – nominal 51.4-Volt 29.4 A-Hr (1.51 kW-hr) with integrated battery management system utilizing CAN communication with the machine controller and charger. Single battery affixed to unit and charged onboard. Brushless permanent magnet DC motor with integral motor controller and helical gear reduction.
Reel Diameter 5 in. (12.7cm)
Rollers Front Roller: Optional – must be ordered. Rear Roller: Aluminum full roller 2" (5.1 cm) diameter with sealed bearings.
Starting Key Start
Tires - Rear Optional - Two quick-detachable pneumatic tires (3" x 3.25" - 6")
Traction Drive Gear
Traction Drive (System) Permanent Magnet DC motor directly coupled to a fully gear-driven transmission with traction differential and traction disconnect to ease movement during service/maintenance operations. Interchangeable drum drive gear cases.
Traction Drum Tapered traction drum for improved after cut appearance.
Weight 292 lbs. (132.5 kg) with 11-blade cutting unit and aluminum Wiehle roller.
Width of Cut 21" (53.3 cm)

Disclaimer

*Dependent on machine configuration, turf conditions, and battery age.

Accessories

Genuine OEM Part
Narrow Wiehle Roller (Part # 04027)
Toro Genuine Parts Logo
Paspalum Roller (Part # 04028)
Genuine OEM Part
Extended Wiehle Roller (Part # 04029)
Image Not Found
LI-ION BATTERY CHARGER (Part # 04066)
Image Not Found
LI-ION BATTERY CHARGER (Part # 04091)
Wheel Kit
Wheel Kit (Part # 04123)
Light Kit
Light Kit (Part # 04135)
Push Broom Brush
Push Broom Brush (Part # 04136)
Toro Genuine Parts Logo
Light Mount Kit (Part # 04138)
Toro Genuine Parts Logo
Wheel Loading Kit (Part # 04219)
Toro Genuine Parts Logo
Rail Loading Kit (Part # 04229)
TransPro™ 80 Trailer
TransPro™ 80 Trailer (Part # 04238)
TransPro™ 200 Trailer
TransPro™ 200 Trailer (Part # 04239)
Toro Genuine Parts Logo
Flat Ramp (Part # 04245)
Rail Ramp Kit
Rail Ramp Kit (Part # 04247)
Toro Genuine Parts Logo
Split Full Front Roller (Part # 04249)
Toro Genuine Parts Logo
Split Narrow Wiehle Roller (Part # 04250)
Genuine OEM Part
Soft Q Grooming Brush (Part # 04270)
Genuine OEM Part
Stiff QC Grooming Brush (Part # 04271)
Turf Evaluator
Turf Evaluator (Part # 04399)
Universal Groomer Drive
Universal Groomer Drive (Part # 04648)
Toro Genuine Parts Logo
Twin Tip Groomer Blade (Part # 04802)
Full Front Roller
Full Front Roller (Part # 04815)
Wide Wiehle Roller
Wide Wiehle Roller (Part # 04825)
11-Blade Cutting Unit
11-Blade Cutting Unit (Part # 04863)
14-Blade Cutting Unit
14-Blade Cutting Unit (Part # 04864)
Genuine OEM Part 106-2648
Bedbar (Part # 106-2648-01)
Genuine OEM Part 108-4302
21.25 Inch Tournament Cut Standard Bedknife (Part # 108-4302)
Genuine OEM Part 108-4303
21.25 Inch Micro Cut Standard Bedknife (Part # 108-4303)
Genuine OEM Part
21.25 Inch Micro Cut EdgeMax™ Bedknife (Part # 115-1880)
Genuine OEM Part
21.25 Inch Tournament Cut EdgeMax™ Bedknife (Part # 115-1881)
Wireless Hourmeter System
Wireless Hourmeter System (Part # 115-4754)
Genuine OEM Part
1.00 Inch Auxiliary Roller Extension Kit (Part # 115-7361)
Narrow Wiehle Roller Scraper/Brush Kit
Narrow Wiehle Roller Scraper/Brush Kit (Part # 115-7377)
Wide Wiehle Roller Scraper Brush
Wide Wiehle Roller Scraper Brush (Part # 115-7378)
Full Roller Scraper Brush
Full Roller Scraper Brush (Part # 115-7379)
Genuine OEM Part 115-7380
Narrow Wiehle Roller Scraper Comb Assembly (Part # 115-7380)
Wide Wiehle Roller Scraper Comb
Wide Wiehle Roller Scraper Comb (Part # 115-7381)
Full Roller Scraper Comb
Full Roller Scraper Comb (Part # 115-7382)
Image Not Found
Rear Roller Scraper Kit with Roller, 21in Greensmaster Flex Cutting Re (Part # 115-7383)
Genuine OEM Part 1921-120-9600
High HOC Kit (Part # 120-9600)
Genuine OEM Part 1921-120-9602
Rear Roller Adjustment Kit (Part # 120-9602)
Dpa Rebuild Kit
Dpa Rebuild Kit (Part # 121-2637)
Narrow Wiehle Roller Scraper Kit
Narrow Wiehle Roller Scraper Kit (Part # 125-3503)
Wide Wiehle Roller Scraper
Wide Wiehle Roller Scraper (Part # 125-3504)
Full Roller Scraper
Full Roller Scraper (Part # 125-3505)
Genuine OEM Part 125-5610
Paper Reel (Part # 125-5610)
Genuine OEM Part
Soft Grooming Brush (Part # 127-1547)
Genuine OEM Part
Stiff Grooming Brush (Part # 127-1548)
Genuine OEM Part 131-6828
Angle Indicator (Part # 131-6828)
Genuine OEM Part 131-6829
Angle Indicator Mount (Part # 131-6829)
Toro Genuine Parts Logo
Synthetic Grease (Part # 136-8595)
Genuine OEM Part 137-6092
EdgeMax™ Fairway Bedknife (Part # 137-6092)
Genuine OEM Part 137-6097
Fairway Bedknife (Part # 137-6097)
Rail Ramp Kit
Rail Ramp Kit (Part # 138-5011)
Toro Genuine Parts Logo
Rod Replacement Kit (Part # 139-2683)
Genuine OEM Part
21.25 Inch Micro Short Cut EdgeMax™ Bedknife (Part # 139-4320)
Genuine OEM Part
21.25 Inch Short Tournament Cut EdgeMax™ Bedknife (Part # 139-4321)
Backlap Access Kit
Backlap Access Kit (Part # 139-4342)
Toro Genuine Parts Logo
Retention Straps Kit (Part # 139-6477)
Toro Genuine Parts Logo
Toro Reel Shim (Part # 140-5531)
Genuine OEM Part 140-5560
Rear Full Roller (Part # 140-5560)
Genuine OEM Part 140-5580
Twin Tip Groomer Blade (Part # 140-5580)
Genuine OEM Part 140-5581
Helix Groomer Blade (Part # 140-5581)
Genuine OEM Part 140-5582
Helix Groomer Blade (Part # 140-5582)
Toro Genuine Parts Logo
Rear Roller (Part # 140-9259)
Image Not Found
KIT-FLEX ROLLER BRACKET, TP80 (Part # 147-2291)
Empty Image Container
CORD-AC, 120V [EU W/FILTER] (Part # 147-6297)
Empty Image Container
ADAPTER, AC, 250V/10A, EU TO UK (Part # 147-7791)
Empty Image Container
ADAPTER, AC, 250V/10A, EU TO AUSTRALIA (Part # 147-7792)
Genuine OEM Part 93-4262
21.25 Inch Micro Cut Standard Bedknife (Part # 93-4262)
Genuine OEM Part
21.25 Inch Tournament Cut Standard Bedknife (Part # 93-4263)
Genuine OEM Part 93-4264
21.25 Inch Low Cut Standard Bedknife (Part # 93-4264)
Genuine OEM Part 94-6392
21.25 Inch High Cut Standard Bedknife (Part # 94-6392)
Genuine OEM Part
Height of Cut Kit (Part # 94-9010)
Genuine OEM Part 99-3794-0P
Aggressive Bedbar (Part # 99-3794-0P)

Documents

Title Documents
GReFlex_1021_Sell_Sheet_022724.pdf PDF - Sellsheet-en-us
GRFlex_eFlex_Accessories_020723.pdf PDF - Brochure-en-us

Parts & Manuals

Select your model year from the options below to view parts & manuals.

 

Warranty

For complete product warranty information contact Toro Customer Service

**See dealer for Warranty details.