Skip to main content

Groundsmaster® 3500-D

Model: 30807

Groundsmaster® 3500-D

Model: 30807

Model: 30807

Key Features

  • The unique Toro Series/Parallel™ traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimizing tire spinouts and scuffing.
  • Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This allows the tire tracks to be shifted within the mowing path to reduce wear on the turf.
  • The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power.
  • The ground-following design of each Contour™ Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.

Product Details

The Groundsmaster® 3500 Series is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour™ Plus cutting decks allow mowing of undulating terrain without scalping. The powerful engine and exclusive traction drive system, gets the mowing job done quickly.

Groundsmaster® 3500 Series mower mowing by a sandtrap
Time Saving
Unlike any other mower on the market, the Groundsmaster® 3500-D allows you to be more productive. The 68" (173 cm) width-of-cut allows you to mow generous swaths, yet its compact size and the Sidewinder® system also allow you to make tight maneuvers in trim areas. Locations normally requiring two different machines can be handled by one.
Groundsmaster® 3500 Series mower mowing a slope
Superior Traction
The unique Toro Series/Parallel™ traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimizing tire spinouts and scuffing.
Groundsmaster® 3500 Series mower
Sidewinder® Cutting Unit System
Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This allows the tire tracks to be shifted within the mowing path to reduce wear on the turf.
Groundsmaster 3500 series mower mowing on a golf course by a path
Quality of Cut
The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power. A unique directional vane and modified discharge opening deliver even clipping dispersion. Optional mulching kit is available.
Groundsmaster 4300 series mower feature - contour plus cutting deck
Scalp-Free Mowing
The ground-following design of each Contour™ Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.
Groundsmaster 3500 series mower feature - operator comfort
Operator Comfort
Deluxe seat adjusts to let you customize your work environment and reduce fatigue. Plenty of space at the operators station paired with easy-to-read controls increases comfort. Plus the steering wheel tilts for steering preference.

Air Filter

Remote-mounted 5" Donaldson® air cleaner

Armrests

Standard

Battery

12V

Blade Style/Type

Rotary

Blade Type (Description)

Combination Blades: 27" (68.6 cm) long, 2.5" (6.4 cm) wide, 0.25" (0.64 cm) thick

Cab Unit

N/A

Controls

Forward and reverse traction control pedals; mow/transport foot lever; hand activated parking brake; hand operated ignition key switch; tilt steering wheel lock; PTO switch; throttle; joystick control for deck raise and lower; cutting deck transport lock.

Cooling System Description

Rear-mounted, cross flow 4-row radiator

Cup Holder

Standard

Cutting Unit Accessories

Mulching Kit, Sectional Roller, Roller Scraper Kit

Cutting Unit Lift/Lower

Joystick control for deck raise and lower

Cutting Unit Type/Configuration

Three Contour™ Plus 27" (69 cm), rear-discharge rotary with standard full-length striping rear rollers on each deck. Sidewinder® system allows all three decks to slide right and left 12" (30 cm) of center, 24" (61 cm) total travel. 68" (173 cm), standard and 72" (183 cm) optional. Deck overhang for trimming is 12" (30.5 cm) @ 68" (173 cm) width of cut and 14" (35 cm) @ 72" (183 cm). Overlap: 6.5" (16.5 cm) at standard width of cut.

Deck Construction

10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5" (3.8 cm) square x 0.25" (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16" (0.48 cm) high-strength steel and 10-gauge exterior channels.

Drivetrain

Diesel

Electrical System

12-volt 585 CCA battery and 40 amp alternator

Engine Cooling

Liquid Cooled

Fuel / Power Source

Diesel / Biodiesel

Fuel Capacity

11 U.S. gal. (41.6 L)

Fuel Filter

Fuel filter/water separator

Gauges/Instrumentation

Fuel gauge and hour meter. Light cluster with check engine and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).

Ground Clearance

6" (15.3 cm)

Ground Following

6" (15.3 cm) anti-scalp cups on each blade.

Ground Speed - Forward

0 - 9 mph (0 - 14 km/h)

Ground Speed - Reverse

0 - 4 mph (0 - 6.4 km/h)

Height

76" (193 cm) with ROPS

Height of Cut Range

0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration

Hydraulic Cylinders

Open center, manual valves, gear pump hydraulic system

Hydraulic Fluid Capacity

3.5 U.S. gal. (13.2 L)

Hydraulic Fluid Type

Toro PX™ Extended Life Hydraulic Fluid

Interlocks

Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches. Parking break set prohibits movement through traction pedal.

Lighting

Optional

Main Frame/Chassis

Formed steel, welded steel and steel tubing

Max Slope Angle

Refer to operator's manual.

Mowing Rate (Productivity)

Up to 4.1 acres/hr (1.7 hectacres/hr)

Mowing Speed

0 - 6 mph (0 - 10 km/h)

Number of Blades

3

Oil Capacity

6.5 U.S. qt. (6.2 L)

Oil Cooler Description

Single pass, aluminum side-by-side oil cooler/radiator, 6.3 fins per inch, serpentine fin profile, 6.5 quart (6.1 liter) capacity.

Optional Accessories

Bimini Canvas Sunshade, LED Work Lights, Universal Sunshade (White or Red)

Overall Width

71.8” (182 cm) with standard 68” (173 cm) width of cut 75.8” (193 cm) with optional 72” (183 cm) width of cut

Parking/Service Brakes

Dynamic through hydrostatic transmission service brake. Hand actuated over center, drum type parking brake.

Power Steering

Yes

Power Train (Engine Description)

Kubota® 3-cylinder, liquid-cooled diesel. Power: 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm. Torque peak: 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm. Displacement: 1123cc. EPA Tier IV Final and Stage V Compliant.

Product Length

116" (295 cm)

Rollers

Standard full-length striping rear rollers on each deck

Safety/Operator Safety

Two post ROPS, seat belt and slope indicator standard

Seat

Two-piece premium commercial two-tone grey vinyl with two armrests, fore/aft adjustment

Sidewinder

Yes

Spindle Assembly

Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25" (3.2 cm) diameter solid cold finished steel spindle shaft. Splined connection between spindle shaft and deck motor. Welded blade retainer plus anti-scalp cups.

Starting

Key Start

Steering System Description

Hydraulic power steering, tilt wheel

Tires - Front

20" x 12" - 10", 4-ply, Turf Tread

Tires - Rear

20" x 10" - 10", 4-ply, Turf Tread

Tool Box

Standard

Traction Drive

3WD

Traction Drive (System)

3-wheel drive in mow and transport. Series/Parallel hydrostatic, closed-loop transmission provides infinitely variable ground speed in forward and reverse. Variable displacement piston type pump.

Transport Width

72.5" (184 cm)

Weight

2,110 lbs. (957 kg) with cutting units

Wheelbase

59.5" (151 cm)

Width of Cut

68" (173 cm)