Professional 4000 Series MyRIDE® HDX Petrol Z Master® 152 cm 74056TE

Wide Cutting Deck with MyRide® Suspension System

Model: 74056TE
UPC/EAN: 9301317984313

Save your body from the toughest terrain with the MyRIDE Suspension System featuring up to 3 inches of travel.
Go full throttle and have confidence in the precise cut from our TURBO FORCE® deck with I-beam front end paired with tubular chassis and bumper.
Survey the task from a higher-vantage-point with the 26" Voodoo Trac™ drive tires.
Powerful illumination for after-hours work with LED headlights.
Keep your phone and drink at arm's reach.
Keep tabs on time and keep devices powered up with the hour meter and USB ports.

Not Returnable

Top

Overview

Kick productivity and comfort up a notch with the Z-Master 4000 HDX with MyRIDE® Suspension System. Power through your day with a powerful Kawasaki® FX921V engine, heavy-duty commercial grade hydros, 26” Voodoo Trac™ Tires, and a 152 cm 7-Gauge High-Strength Steel TURBO FORCE® cutting deck. Ride in comfort with the customizable MyRIDE Suspension System featuring up to 7.6 cm of platform travel to save your body from tough terrain. Plus, with the hour meter, USB ports, phone holder, and cup holder, you’ll have everything you need from the comfort of the deluxe suspension seat to make long days feel shorter.

Features

MyRIDE® Suspension System

Save your body from the toughest terrain with the MyRIDE Suspension System.

TURBO FORCE® Cutting Deck

Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.

26" Voodoo Trac™ Drive Tires

Get the ultimate in agressive tread and styling and survey the task from a higher-vantage-point with 26" Voodoo Trac™ Drive Tires.

LED Headlights

Powerful illumination for after-hours work.

Rubber Discharge Chute

Trim close without damaging landscape structures or your chute.

Deck Step Plate

Keep your grip and remove excess mud from your shoes with a deck step plate.

Dual Capture Anti-Scalp Rollers

Intelligently engineered dual capture anti-scalp rollers ensure the highest quality of cut in the harshest terrain you can throw at it.

Phone and Cup Holder

Keep your phone and drink at arm's reach with built-in phone and cup holders.

USB Ports

USB ports to help you stay charged on the job.

Clear Sightline to Rear Tires

Clear sightline to rear tires for enhanced control so you can clear a path without tire spin.

Electronic Deck Lift Assist

Electronic deck lift assist in dialing in your desired cut height.

Specifications

Blade Tip Speed	5,638 m/min
Comfort Platform	MyRIDE^® Suspension System
Deck Size	152 cm
Discharge Chute	Rubber
Engine Brand	Kawasaki
Engine Displacement (cc)	852 cc
Engine Horsepower	25.5 hp
Engine Power (kW)	19 kW
Forward Ground/Transport Speed	Up to 19.0 kph
Fuel Capacity	37.8 L
Fuel Type	Gasoline
Height of Cut	3.8 - 14.0 cm
Hour Meter	Standard
Ignition	Electric
Lighting	LED Headlights
Number of Blades	3
Platform Travel	7.6 cm
Product Features	Electric Start, Foot Operated Height of Cut, Gas Powered, Hour Meter, MyRIDE Suspension System
Product Type	Zero Turn Mowers
Roll-Over Protection System (ROPS)	Folding; Standard
Seat	Deluxe Suspension Seat
Shocks	1 Front Center / 2 Rear
Spindle Bearings	Maintenance-free
Spindle Housing	22.9 cm Diameter Cast Aluminum
Start Type	Electric
Steering Controls	1.4" (3.6 cm) Diameter Grips; Adjustable, Dampened

Accessories

Road Lights Kit (Part # 02936)

Hypr-Oil™ 500 (quart) (Part # 114-4713)

$16.49 USD

Hypr-oil™ 500 (quart). Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn mowers. It provides excellent wear and corrosion protection for hydraulic systems, helping to maintain consistent performance and extend the service life of hydraulic components. Always refer to your operator manual for the correct fluid specification and service intervals.

$16.49 USD

Hypr-Oil™ 500 (gallon) (Part # 114-4714)

$65.99 USD

Toro Hypr-Oil 500 is a high-performance hydraulic fluid specifically formulated and approved by Toro engineering for use in Toro commercial zero turn and stand-on mower hydraulic systems. Maintaining the correct hydraulic fluid and changing it at the manufacturer-recommended interval is critical to protecting hydraulic pumps, wheel motors, and other hydraulic components from wear and corrosion — particularly on machines operating under commercial duty cycles. Refer to your operator manual for the correct change interval and fluid capacity for your equipment.

$65.99 USD

Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)

$294.79 USD

Toro Hypr-Oil 500 is a high-performance hydraulic fluid formulated and approved by Toro engineering for commercial zero turn and stand-on mower hydraulic systems. The 5-gallon commercial bulk pack is designed for fleet operators and service shops performing multiple machine hydraulic fluid changes. Maintaining the correct hydraulic fluid on schedule protects pumps, wheel motors, and other hydraulic components from accelerated wear. Refer to your operator manual for the correct change interval and capacity for each machine. Do not mix with other hydraulic fluids.

$294.79 USD

KIT, JACK W/ADAPTER (Part # 126-7282)

$262.89 USD

KIT, ADAPTER-JACK (Part # 126-7283)

$92.39 USD

KIT-STRIPER 48, 52, 60, 72 (Part # 126-7882)

$635.79 USD

Please contact your local dealer

Riding Mower Jack Kit (Part # 127-6666)

$156.19 USD

This genuine Toro OEM riding mower jack kit is designed to safely lift and support your Toro riding mower or zero turn, giving you safe, stable under-deck access for blade changes, belt replacements, and routine maintenance. It is one of the most practical purchase-stage accessories for any new mower owner — investing in a proper jack from day one avoids improvised lifting methods that risk injury and equipment damage. Verify your model and serial number before ordering.

$156.19 USD

Single Side Mirror Kit (Part # 134-8275)

Shock/Spring ASM (Part # 136-8993)

$189.19 USD

Toro riding mower suspension systems are engineered with carefully selected components that work together to provide you with a smooth ride on uneven turf. The cutting deck of the mower works in conjunction with the suspension system to provide a consistent quality of cut. Verify your model and serial number to confirm compatibility before ordering.

$189.19 USD

60 Inch Recycler Kit (Part # 139-6655)

$431.19 USD

Recycler Kit, when installed on compatible 42 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. Verify your model and serial number to confirm compatibility before ordering.

$431.19 USD

20.5 Inch Hi-Flow Blade (Part # 140-1240)

$26.24 USD

This Toro OEM 20.5-inch Hi-Flow replacement mower blade is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.

$26.24 USD

20.5 Inch Atomic Blade (Part # 140-1241)

$31.49 USD

This Toro OEM 20.5-inch Atomic replacement blade — commonly known as a Gator-style blade — features a serrated cutting edge with raised teeth that shred grass clippings into much finer pieces than a standard mulching blade. The serrated design re-cuts clippings multiple times on every pass, delivering the highest mulching quality available and a consistently crisp, clean cut even in dense or damp grass. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$31.49 USD

20.50 Inch Medium Flow Blade (Part # 140-4853)

$34.64 USD

This Toro OEM 20.5-inch Mid Flow replacement mower blade is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$34.64 USD

20.50 Inch Low Flow Blade (Part # 140-4854)

$34.64 USD

This Toro OEM 20.5-inch Low Flow replacement mower blade features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$34.64 USD

20.5 Inch Recycler Blade (Part # 140-4855)

$31.49 USD

This Toro OEM 20.5-inch Recycler replacement mower blade is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$31.49 USD

Hi-Flow20.5 Inch Blade Pack (6) (Part # 140-4877)

$155.39 USD

This Toro OEM 20.5-inch Hi-Flow replacement mower blade — sold as a pack of 6 is designed to produce high lift, cutting grass cleanly and propelling clippings upward and out through the discharge chute. Hi-Flow blades — also referred to as basic, standard, or 2-in-1 blades — are the preferred choice when using a grass catcher or bagger, as the increased airflow drives clippings efficiently into the collection bag. This blade is compatible with multiple Toro riding lawn mowers models — always verify your model and serial number before ordering to confirm the correct fit.

$155.39 USD

Mid Flow 20.5 Inch Blade Pack (6) (Part # 140-4878)

$207.89 USD

This Toro OEM 20.5-inch Mid Flow replacement mower blade — sold as a pack of 6 is engineered to provide a balance between the high suction of Hi-Flow blades and the minimal airflow of Low Flow blades. Mid Flow blades have a slight upward angle on the cutting edges, producing moderate lift while requiring less horsepower than Hi-Flow blades — making them a versatile option for varied terrain and grass conditions. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$207.89 USD

Low Flow 20.5 Inch Blade Pack (6) (Part # 140-4879)

$207.89 USD

This Toro OEM 20.5-inch Low Flow replacement mower blade — sold as a pack of 6 features a slightly curved tip design that keeps airflow to a minimum during operation. Low Flow blades are the right choice for mowing in sandy, dusty, or dry conditions where high suction would stir up excessive debris — they also cause less strain on the engine than Hi-Flow blades, making them a practical option when horsepower is a consideration. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$207.89 USD

Atomic 20.5 Inch Blade Pack (6) (Part # 140-4880)

$187.94 USD

Recycler 20.5 Inch Blade Pack (6) (Part # 140-4881)

$187.94 USD

This Toro OEM 20.5-inch Recycler replacement mower blade — sold as a pack of 6 is built to work within Toro's Recycler mulching system, featuring uniquely shaped 'accelerator' wings that act as a fan to keep clippings circulating beneath the deck. As clippings are forced back into the cutting zone, they are re-cut multiple times into fine pieces that fall back into the lawn and break down into natural fertilizer — feeding the grass and reducing the need to bag or rake. Compatible with multiple Toro riding lawn mowers models — verify your model and serial number before ordering.

$187.94 USD

SCREEN-SPARK ARRESTOR (Part # 142-7683)

$29.69 USD

TRIMMER MOUNT [4000] (Part # 144-2665)

$212.29 USD

Please contact your local dealer

JACK MOUNT KIT (Part # 144-2676)

$115.49 USD

Please contact your local dealer

HARDTOP SUN CANOPY (ARTICULATING) (Part # 144-3719)

$587.39 USD

Please contact your local dealer

60" CHUTE GATE KIT [4000] (Part # 144-6572)

$544.49 USD

Please contact your local dealer

60 CE COMPLIANCE KIT [4000] (Part # 145-1263)

$403.69 USD

Please contact your local dealer

Semi Pneumatic Assembly 15 x 6.50-6 (Part # 145-1919)

$309.09 USD

This genuine Toro OEM 15 x 6.50-6 semi-pneumatic wheel assembly is a direct replacement for compatible Toro riding mowers and zero turn mowers. Semi-pneumatic wheels have a foam-filled or solid tire that provides ride quality similar to a pneumatic tire without the risk of puncture or pressure maintenance. Replace when the existing wheel is cracked, warped, or showing structural damage. Verify your model and serial number before ordering.

$309.09 USD

Please contact your local dealer

Handle Extension Kit (Part # 145-3615)

$91.29 USD

Genuine OEM Part

$91.29 USD

MICHELIN® X® TWEEL® Turf Airless Radial Tires (26") (Part # 147-4600)

$1,086.79 USD

The MICHELIN® X® TWEEL® Turf Airless Radial Tires are the next “revolution” in commercial mowing has arrived. The MICHELIN X TWEEL Turf Airless Radial Tire has all the qualities you would want in a pneumatic tire but it never needs air. The MICHELIN X TWEEL Turf airless radial tire is a single-unit assembly that replaces a conventional tire and wheel, eliminating the need for air pressure entirely — which means no flats, no downtime, and no patch kits. The wear life of a TWEEL tire is significantly longer than a comparable pneumatic tire, reducing the frequency of replacement and total cost of ownership over time. Verify your model and serial number to confirm the correct size before ordering.

$1,086.79 USD

BLADE-20.50 HIGH FLOW [.250] (Part # 147-6252)

$31.49 USD

6 PACK-BLADE, 20.50 HIGH FLOW [.250] (Part # 147-6256)

$187.94 USD

MICHELIN® X® TWEEL® Turf Airless Caster Wheels (15") (Part # 147-6337)

$387.19 USD

The MICHELIN® X® TWEEL® Turf Caster Wheel is the next “revolution” in commercial mowing. The MICHELIN X TWEEL Turf Caster Wheel has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.

$387.19 USD

BAGGER KIT, Z MASTER 2000 / 4000 (Part # 78439)

4000 Series E-Z Vac Blower & Drive Kit for 60" Deck (Part # 78466)

$2,099.00 USD

4000 Series E-Z Vac Blower & Drive Kit for 60" Deck - use with 4000 Series Twin Soft Bagger 48 - 60" Deck (#78463)

$2,099.00 USD

Please contact your local dealer

Parts & Manuals

Select your model year from the options below to view parts & manuals.

74056TE Serial #
420600000-999999999
420214694-420599999
420000000-420214693
418579618-419999999
418290468-418579617
418031645-418290467
417400000-418031644
416274408-417399999
416274360-416274407
414400000-416274359
414328135-414399999
414328123-414328134
414072230-414328122
414072158-414072229
412000000-414072157
411937555-411999999
411423985-411937554
411423981-411423984
409854776-411423980
409854760-409854775
408907973-409854759
400000000-408907972

Warranty

For complete product warranty information contact Toro Customer Service

74056TE Product Warranty

**See dealer for Warranty details.