Workman® HDX-D 4WD
Model: 07387
Workman® HDX-D 4WD
Model: 07387
Model: 07387
See All Items in Workman® HDX Series
Key Features
- Payload Capacity of up to 3352 lbs.
- Comfortable ride and easy to reach controls.
- On-demand 4WD when conditions require additional traction.
- Robust suspension provides ride quality that reduces fatigue and increases operator comfort.
Resources
Product Details
You can’t get more hauling capacity, versatility, or bang for your utility vehicle buck than you can with a Toro Heavy-Duty Workman. With an I-beam axle that’s seven times stronger than a tubular design, a bed that hauls up to 3,352 pounds (1,520 kg), and an electronic fuel-injected engine that makes every gallon go farther, it’s the highest performing utility vehicle on the market today.
Payload Capacity
Operator Comfort
Four Wheel Drive Traction
Ride Quality
Versatility
Tough Frames
High Performance Engine
DeDion Rear Axle
Disc Brakes
Front Impact Bumper
Air Filter
Remote mounted, heavy-duty 2-stage air cleaner with evacuator valve
Alternator
60 amps with electronic regulator
Battery
12V
Brakes - Front
Hydraulic Disc
Brakes - Rear
Hydraulic disc
Cargo Bed
Yes
Cargo Capacity
2,785 lbs. (1266 kg)
Clutch
7.5" (19 cm) clutch and pressure plate
Cooling System
Liquid Cooled
Crated Model
No
Differential Lock
Manual engage rear differential lock
Displacement
950cc (58 ci)
Drivetrain
Diesel
Frame
Steel space frame front frame and C-channel rear frame.
Fuel / Power Source
Diesel
Fuel Capacity
6 U.S. gal. (22.7 L)
Fuel Filter
Combination fuel filter/water separator with a 30 micron filtration and 50 mesh suction screen in tank.
Fuel Pump
Electronic pump
Gauges/Instrumentation
Fuel and coolant temperature gauges. Hour meter. Oil pressure, check engine and battery charge indicator lights. Tachometer and speedometer.
Ground Clearance
7" (18 cm)
Height
Overall Top of ROPS: 75.8" (192.5 cm)
High Speed Lockout
Interlock key switch that prevents engine from running in 3rd gear. Limits engine RPM to 2,200 in 3rd gear high range (HDX gas).
Horn
Standard
Hydraulics
4 gpm (15 lpm) gear pump provides hydraulic flow for power steering and lift in series. Lift control valve with quick disconnects for dual lift cylinders or for attachments when quick disconnects are switched. 8 quart total capacity.
Inside Turning Radius
100" (254 cm)
Interlock
To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow hydraulics and rear PTO must be disengaged/switched off
Outside Turning Radius
300" (762 cm)
Overall Width
64.7" (164.3 cm)
Power Rating
23.3 hp (17.4 kW)
Power Steering
Yes
Power Train (Engine Description)
Kubota® 902D, 3-cylinder, inline vertical, 4-cycle, liquid cooled, counterbalanced diesel engine. Full pressure lubrication with spin-on oil filter. Meets EPA Tier IV compliance. Biodiesel ready for use up to B-20.
Product Length
Overall w/o Bed: 127.6" (324 cm) Overall w/ Full Bed: 130" (330 cm)
Rear Draw Bar
Standard
Rear Draw Bar Description
Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes. Maximum tongue weight of 600 lbs (272 kg). Trailers over 1500 lbs require trailer brakes.
Steering System Description
Hydraulic power steering with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70 degrees on 2WD and 50 degrees on 4WD.
Suspension - Front
Independent system with dual "A" frame control arms, dual coil springs and dual shock absorbers with anti-sway bar.
Suspension - Rear
DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers.
Suspension Travel - Front
5.75" (14.6 cm)
Suspension Travel - Rear
3" (7.6 cm)
Tires - Front
20" x 9" - 12", 6-ply, Turf Tread
Tires - Rear
24" x 12" - 12", 6-ply, Turf Tire
Total Vehicle Capacity
3,185 lbs. (1448 kg)
Towing Capacity
3,500 lbs. (1587 kg)
Traction Drive
Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to front wheel with highest traction.
Traction Drive (System)
4WD
Transmission
Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen and external filter.
Vehicle Configuration
Standard
Vehicle Type
Heavy Duty
Weight
w/o Fuel: 2,015 lbs. (916 kg)
- Workman HD Series Accessories PDF - Brochure-en-us
- Workman HD Series Sell Sheet PDF - Sellsheet-en-us
- Workman HDX Series Winter Accessory Guide PDF - Brochure-en-us
For complete product warranty information contact Toro Customer Service
**See dealer for Warranty details.