Skip to main content

Groundsmaster® 4300

Model: 30879

Groundsmaster® 4300

Model: 30879

Model: 30879

Key Features

  • Quick and easy access to all major service areas
  • Optimized design and lightweight materials reduce weight and turf compaction without compromising performance and functionality
  • The Groundsmaster® Contour Series mowers offer the productivity needed to mow up to 10.6 acres (4.3 hectares) per hour, ensuring fast job completion
  • The Contour™ Plus cutting technology elevates cut quality by using air inlet pockets to keep grass upright for a cleaner cut, while a modified rear discharge opening ensures even clipping distribution. An optional mulching kit and high height of cut blade are also available

Product Details

The Groundsmaster® 4300-D has a lightweight footprint and CrossTrax™ 4-wheel drive for superior hill-climbing. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain.

Groundsmaster® 4300 series mower with engine cover open
Easy Service
Quick and easy access to all major service areas.
Grandstand 4300 series mower feature - lighter weight design
Lighter Weight Design
Optimized design and use of lightweight materials means less weight and turf compaction without sacrificing performance and functionality.
Productivity
Productivity
The Groundsmaster® Contour Series mowers provide the productivity you need, no matter the size. Mow up to 10.6 acres (4.3 hectares) per hour to get the job done fast.
Groundsmaster 4300 series mower feature - contour plus cutting deck
Contour® Plus Cutting Decks
The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut and a modified rear discharge opening disperses clippings more evenly. An optional mulching kit and optional high height of cut blade are also available.
Groundsmaster 4300 series feature - air ride seat suspension
Air-Ride Seat Suspension System
Convert the standard seat suspension to air-ride for rough applications to provide more comfortable ride for operators logging long hours in the seat.
Groundsmaster 4300 series mower feature - All Wheel Drive
CrossTrax® All-Wheel Drive
Series/parallel hydraulic traction system with full time forward 4-wheel drive.
Grandstand 4300 series mower feature - operator comfort
Operator Comfort
All of the indicators and controls to operate the unit are conveniently located on the right armrest. Control console pivots back for right hand entry and exit. Tilt steering, deluxe suspension seat, improved visibility and lower operating noise enhance the operator experience and help to reduce fatigue.
Groundsmaster® 4300
Durable Design
Proven rugged frame, drivetrain, and components ensure durability and long life. Heavy-duty welded steel decks and frames provide extra durability and long life.

Air Filter

Dry, replaceable primary and optional safety element.

Armrests

Standard

Battery

12V

Blade Style/Type

Rotary

Blade Type (Description)

22” (55.9 cm) long, 2.5” (6.4 cm) wide, 0.25” (0.64 cm) thick combination blades.

Cab Unit

N/A

Controls

Single foot-operated traction pedal. Hand-operated key ignition switch, cutting unit raise/lower switch, cutting unit engage switch, parking brake switch, cruise control switch, and headlight switch all positioned on right hand pivoting control console.

Cooling System Description

Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity.

Cup Holder

Standard

Cutting Unit Accessories

Leaf Mulching Kit, Combination Blade, Angle Sail Blade, Atomic Mulching Blade, Rear Roller Scraper Kit, Sectional Rear Roller, 22” Rotary Replacement Cutting Unit

Cutting Unit Lift/Lower

Joystick control for deck raise and lower.

Cutting Unit Type/Configuration

Five Contour™ Plus 22” (55.9 cm), rear-discharge rotary cutting units with rear roller on each deck. 90” (229 cm), overlap 5” (12.7 cm), overhang 1” (2.5 cm)

Deck Construction

Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels.

Drivetrain

Diesel

Electrical System

12-volt battery with 540 CCA, 55 amp alternator. Overload protection with automotive-type fuses.

Engine Cooling

Liquid Cooled

Fuel / Power Source

Diesel / Biodiesel

Fuel Capacity

13.5 U.S. gal. (51.1 L)

Gauges/Instrumentation

InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, low oil pressure, alternator, engine hours, engine rpm, voltage, counterbalance settings, glow indicator, lift/lower indicator.

Ground Clearance

5" (12.7 cm)

Ground Following

6” (15.3 cm) anti-scalp cups on each blade.

Ground Speed - Forward

0 - 10 mph (0 - 16.1 km/h)

Ground Speed - Reverse

0 - 4 mph (0 - 6.4 km/h)

Height

86" (215 cm) with 2-post ROPS

Height of Cut Range

0.75” - 4” (1.9 cm - 10.2 cm) in 0.25” (0.6 cm) increments.

Hydraulic Cylinders

Two remote spin-on filters: main system, and traction charge.

Hydraulic Fluid Capacity

14 U.S. gal. (53 L)

Hydraulic Fluid Type

Toro PX™ Extended Life Hydraulic Fluid

Implement Drive

Hydraulic, direct coupled to spindle.

IntelliDash™ Capable

No

Interlocks

Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, decks stop. If operator leaves the seat with the unit out of neutral, engine stops. Mowing only permitted in low range. Engine stops if parking brake engaged and traction pedal not in neutral.

Lighting

Standard

Main Frame/Chassis

All welded formed-steel frame with integral tie-down anchors.

Max Slope Angle

Refer to operator's manual.

Mowing Rate (Productivity)

Up to 6.4 acres/hr (2.6 hectacres/hr)

Mowing Speed

0 - 7 mph (0 - 11.3 km/h)

Number of Blades

5

Oil Capacity

5.5 U.S. qt. (5.2 L)

Oil Cooler Description

Double row, single-pass oil cooler that tilts out for cleaning.

Optional Accessories

Air-ride Seat Suspension, Two-post ROPS Extension System, White Sunshade, Red Sunshade, Operator Fan Kit, Diagnostic Display Box, Golf Ball Operator Guard

Overall Width

96.3" (245 cm) (outside of decks)

Parking/Service Brakes

8” mechanical drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking brake. Dynamic braking through hydrostatic traction drive system.

Power Steering

Yes

Power Train (Engine Description)

Yanmar® 3-cylinder, liquid-cooled, turbo-charged diesel, 43.4 hp (32.4 kW), 88.5 ft.-lbs. of torque, 91.4 cu. in. (1.5 liter) displacement. EPA Tier IV Final and Stage V compliant.

Product Length

126" (320 cm)

Rollers

Per deck: Two 5” (12.7 cm) diameter front rollers with sealed stainless steel bearings, one 3” (7.6 cm) diameter rear roller with greaseable stainless steel bearings.

Safety/Operator Safety

2-post ROPS and seat belt standard.

Seat

Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt.

Spindle Assembly

Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25” (3.2 cm) diameter solid cold finished steel spindle shaft. Splined connection between spindle shaft and pulley. Welded blade retainer plus anti-scalp cups.

Starting

Key Start

Steering System Description

Rear wheel, power steering with an independent hydraulic pump circuit.

Tires - Front

26.5" x 14" - 12", 6-ply

Tires - Rear

20" x 12" - 10", 6-ply

Tool Box

Standard

Traction Drive

4WD

Traction Drive (System)

Front drive wheels powered by a hydrostatic pump with individual wheel motors. Parallel / Series Hydrostatic, closed loop 4 wheel drive, forward direction only. Variable displacement piston pump with direct displacement control, Standard all-wheel drive with CrossTrax® All-Wheel Drive system, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors.

Transport Width

88.3" (224 cm) (outside of front tires), front track width the same. Rear track width: 54" (137 cm)

Weight

Traction Unit Weight: 3,205 lbs (1454 kg) - with full fluids and 5 cutting units. Cutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only.

Wheelbase

60" (152.4 cm)

Width of Cut

90” (229 cm)